• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.8-14
• /
• 1998

The derivation of the dual integral equation in the spectral domain, which has total fields of the interfaces as unknowns, is investigated. It is analytically shown that the derivation of the dual integral equation is equivalent to deriving the Helmholtz-Kirchhoff integral equation from the Wiener-Hopf integral equation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9C
• /
• pp.743-748
• /
• 2008

This paper makes a research on the equivalent Wiener-Hopf equation which can obtain the coefficient of TDL filter on orthogonal input signal in terms of mean square error. Using this result, we can present the coefficient and error of TDL filter directly without inverse orthogonalization process on orthogonal input signal. We make a theoretical analysis on MMSE and show an Wiener-Hopf solution and the proposed equivalent one in mathematical example simultaneously.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.561-571
• /
• 2012

The MTF(Modulation Transfer Function) is one of quality assesment factors to evaluate the performance of satellite images. Image restoration is needed for MTF compensation, but it is an ill-posed problem and doesn't have a certain solution. Lots of filters were suggested to solve this problem, such as Inverse Filter(IF), Pseudo Inverse Filter(PIF) and Wiener Filter(WF). The most commonly used filter is a WF, but it has a limitation on distinguishing signal and noise. The L-curve-based Modified Wiener Filter(MWF) is a solution technique using a Tikhonov regularization method. The L-curve is used for estimating an optimal regularization parameter. The image restoration was performed with Dubaisat-1 images for PIF, WF, and MWF. It is found that the image restored with MWF results in more improved MTF by 20.93% and 10.85% than PIF and WF, respectively.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.245-250
• /
• 2013

The Wiener-Khinchin theorem, which means that the autocorrelation function of a signal corresponds to the power spectrum of the signal, is very important in signal processing, spectroscopy and telecommunications engineering. However, because of needs for some relatively expensive equipments such as a correlator and the signal processing system, its demonstration in most undergraduate class is not easy so far. Recently, digital oscilloscopes whose functions can be replaced foresaid equipments are marketed with development of digital engineering. In this paper, a simple demonstration of the theorem is given by a digital storage oscilloscope and a personal computer with its theoretical background. The reason that deals again with this theorem which has been introduced in 1930 is that it has been not well informed yet to us and theoretical background of the demonstration is directly introduced from its driving process. Through deriving process of the theorem, some extended physical meanings of the impedance, power, power factor, Wiener spectrum, linear system response and, furthermore, basic idea of the Planck's quantization in the black body theory reveal themselves naturally. Hence it can be referred to lectures in general physics, modern physics, spectroscopy and material characterization experiment.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.519-524
• /
• 2018

Chest examinations and mass chest examinations using the CR(computed radiography) System are frequently used clinically. a factor that degrades image quality in the acquisition process is the use of unused IPs long times. this paper addresses the estimation of winer filter and improved wiener filter to restoration of Chest CR images Experimental results show that the proposed method can reduce noise. in low noise variation image wiener method was excellent than improved method and the result was the opposite at high noise varience. the application of algorithms to chest CR images effectively eliminates noise. the classic Wiener filter was better than the improved method. Multiple patients examined during the process without any erase IP(image plate) process, The proposed algorithm determines that the images can be restored to a good quality and will help to read the images.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.4
• /
• pp.191-201
• /
• 2016

A stochastic process has been used to develop a condition-based model for preventive maintenance of armor units of rubble-mound breakwaters that can make a decision the optimal interval at which some repair actions should be performed under the perfect maintenance. The proposed cost model in this paper based on renewal reward process can take account of the interest rate, also consider the unplanned maintenance cost which has been treated like a constant in the previous studies to be a time-dependent random variable. A function for the unplanned maintenance cost has been mathematically proposed so that the cumulative damage, serviceability limit and importance of structure can be taken into account, by which a age-based maintenance can be extended to a condition-based maintenance straightforwardly. The coefficients involved in the function can also be properly estimated using a method expressed in this paper. Two stochastic processes, Wiener process and gamma process have been applied to armor stones of rubble-mound breakwaters. By evaluating the expected total cost rate as a function of time for various serviceability limits, interest rates and importances of structure, the optimal period of preventive maintenance can easily determined through the minimization of the expected total cost rate. For a fixed serviceability limit, it shows that the optimal period has been delayed while the interest rate increases, so that the expected total cost rate has become lower. In addition, the gamma process tends to estimate the optimal period more conservatively than the Wiener process. Finally, it is found that the more crucial the level of importance of structure becomes, the more often preventive maintenances should be carried out.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.89-96
• /
• 2023

The Wiener-type nonlinear model where a static nonlinear block follows a dynamic linear block is widely used to describe the dynamics of chemical processes. A long process excitation step is typically needed to identify this Wiener-type nonlinear model with two blocks. In order to cope with this disadvantage, an identification method for the Wiener-type nonlinear model that uses only a single-step response is proposed here. The proposed method estimates the response of the dynamic linear sub-block from the initial part of the step response, and then the static nonlinear sub-block is identified. Because the only single-step response is used to identify the Wiener-type nonlinear model, there is great benefit in time and cost for obtaining process response. The performance of the proposed identification method with the single-step response is verified through a representative Wiener-type nonlinear process, a pH titration process, and a liquid level system.

• Archives of design research
• /
• v.20
• /
• pp.293-304
• /
• 1997

The Wiener Werkstatte created the most avangarde textile designs in Europe at the end of the 19th and the beginning of the 20th century. This study is to examine the distinctive characteristics of the textile design of the Wiener Werkstatte. The purpose of this study is to analyze the textile designs of the various designers who had contributed to shape the characteristics of the Wiener Werkstatte at various stages, and to catagorize the designs according to the subject matter, the design sources, the layout, the design principles, and the usages. The textiles of the first half of the Wiener Werkstatte are wovens for the homefurnishings. They were used as upolsteries. Wall coverings, and curtains in the commissioned buildings and houses which Hoffman designed and built in conjunction with the Wiener Werkstatte. The designs of this period have the simple and bold characteristics using less then three colors in a design. The subject matters used in the designs are firstly, stylized animals and plant forms; secondly, the purely geometric forms derived from the architural buildings. The textiles of the latter half of the Wiener Werkstatte put more emphasis on the printed textiles for the women's apparels. The textile designs of this period are categorized into four groups : firstly, the designs that stylized plant forms ; secondly, reinterpretational designs; thirdly, ethnic designs : and fourthly, the geometric art deco designs. The number of colors used in a design range up to 7 colors and all over, stripe, and ogee layouts are used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.286-294
• /
• 2011

In most digital cameras, images are obtained by a sensor overlaid by the color filter array (CFA) such as Bayer, demanding a demosaicking procedure to rebuild the full resolution color images. However, due to the nature of sensor, it is necessary to consider denoising step to remove the noise. In this paper, we analyze demosaicking and denoising jointly and show that the proposed method can solve the denoising issue by simple manner, well suppress different level of noises. The proposed algorithm yields comparable performances measured by several image quality assessment (CPSNR, SCIELAB, and FSIM), while the computational cost is low.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1393-1398
• /
• 2004

Image is degraded by several causes such as the process of acquisition, storage and transmission. To restore those images, many researches have been continued. Centrally methods to restore degraded image by AWGN(additive white gaussian noise) a.e mean filter and wiener filter. Especially, mean filter is superior in noise reduction of area that is a small change of luminosity. But mean filter brings about the effect smoothing edge components of the image, because it does'nt consider characteristics of the image. So in this paper we propose an image restoration method compounding respective images adding established weights, after filtering with mean filter and powerful wiener filter in both improvement of contrast and preservation of edge components.