• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.141-159
• /
• 2016

Commonly in steel frames, steel beam and concrete slab are connected together by shear keys to work as a unit member which is called composite beam. When a composite beam is subjected to positive bending, flexural strength and stiffness of the beam can be increased due to "composite action". At the same time despite these advantages, composite action increases the strain at the beam bottom flange and it might affect beam plastic rotation capacity. This paper presents results of study on the rotation capacity of composite beam connected to Rectangular Hollow Section (RHS) column in the steel moment resisting frame buildings. Due to out-of-plane deformation of column flange, moment transfer efficiency of web connection is reduced and this results in reduction of beam plastic rotation capacity. In order to investigate the effects of width-to-thickness ratio (B/t) of RHS column on the rotation capacity of composite beam, cyclic loading tests were conducted on three full scale beam-to-column subassemblies. Detailed study on the different steel beam damages and concrete slab damages are presented. Experimental data showed the importance of this parameter of RHS column on the seismic behavior of composite beams. It is found that occurrence of severe concrete bearing crush at the face of RHS column of specimen with smaller width-to-thickness ratio resulted in considerable reduction on the rate of strain increase in the bottom flange. This behavior resulted in considerable improvement of rotation capacity of this specimen compared with composite and even bare steel beam connected to the RHS column with larger width-to-thickness ratio.

• 한국강구조학회 논문집
• /
• 제19권5호
• /
• pp.493-501
• /
• 2007

최근, 국내에서는 물량절감과 경제성 확보를 목적으로 변단면 부재의 적용이 활발히 이루어지고 있으나 재료비선형을 이용한 설계방법으로는 취성파괴의 문제점에 대한 명확한 해결책을 제시하지 못하고 있으며, 변단면 부재의 초기변형, 폭두께비, 웨브 스티프너, 횡지지 거리등에 관한 연구가 부족한 실정이다. 따라서 본 연구에서는 기존에 연구된 이론식과 재료 및 기하 비선형 해석으로 신뢰성이 입증된 범용 유한요소 해석 프로그램인 ANSYS 9.0을 이용하여 춤이 큰 변단면 H형 보의 해석 모델을 완성하고 실험결과를 바탕으로 판-폭두께비와 비지지거리를 주요변수로 좌굴 및 극한내력을 평가하여, 웨브의 판폭두께비가 클 경우 좌굴내력이 감소하며, 횡 비지지 거리를 짧게 할 경우 연성능력을 향상시킬수 있음을 확인 하였다.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.37-45
• /
• 2024

Steel plate shear walls (SPSWs) have been recognized as an effective seismic-force resisting systems due to their excellent strength and stiffness characteristics. The infill steel plate in a SPSW is constrained by a boundary frame consisting of vertical and horizontal structural members. The main purpose of this study was to investigate deformation modes and hysteretic characteristics of steel plate shear walls (SPSWs) to consider the effects of their aspect ratios and width-to-thicness ratios. The finite element model (FEM) was establish in order to simulate cyclic responses of SPSWs which have the two-side clamped boundary condition and made of conventional steel grade. The stress distribution obtained from the FEA results demonstrated that the principal stresses on steel plate with large thickness-to-width ratio were more uniformly distributed along its horizontal cross section due to the formation of multiple struts.

• Steel and Composite Structures
• /
• 제18권2호
• /
• pp.467-480
• /
• 2015

The steel-concrete composite decks have high fatigue durability and deformability in comparison with ordinary RC slabs. Withal, the steel-concrete composite deck is mostly heavier than the RC slabs. We have proposed herein a new type of steel-concrete composite deck which is lighter than the typical steel-concrete composite decks. This can be achieved by arranging hollow sectional members as shear connectors, namely, half-pipe or channel shear connectors. The present study aims to experimentally investigate mechanical characteristics of the half-pipe shear connectors under the direct shear force. The shear bond capacity and deformability of the half-pipe shear connectors are strongly affected by the thickness-to-diameter ratio. Additionally, the shear strengths of the hollow shear connectors (i.e. the half-pipe and the channel shear connectors) are compared. Furthermore, shear capacities of the hollow shear connectors equivalent to headed stud connectors are also discussed.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.435-450
• /
• 2005

Here, the dynamic instability characteristics of aero-thermo-mechanically stressed functionally graded plates are investigated using finite element procedure. Temperature field is assumed to be a uniform distribution over the plate surface and varied in thickness direction only. Material properties are assumed to be temperature dependent and graded in the thickness direction according to simple power law distribution. For the numerical illustrations, silicon nitride/stainless steel is considered as functionally graded material. The aerodynamic pressure is evaluated based on first-order high Mach number approximation to the linear potential flow theory. The boundaries of the instability region are obtained using the principle of Bolotin's method and are conveniently represented in the non-dimensional excitation frequency-load amplitude plane. The variation dynamic instability width is highlighted considering various parameters such as gradient index, temperature, aerodynamic and mechanical loads, thickness and aspect ratios, and boundary condition.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.254-261
• /
• 1997

In desingin plate bridges, the width-thickness ratio of flanges and webs are proportioned in such that the premature local buckling of flanges and webs prior to achievement of the full strength of plate-girders must be prevented. It is the common practive in most design codes that the flange local buckling strength and the web bend buckling strength are separately computed. In most practical plate girders, however, the flange buckles simultaneously when web bend-buckling occurs, vice versa. The primary purpose of the present study is to investigate the phenomenon, which may be called flange-web interactive buckling. Using the eight-node shell element available in the commercial multi-purpose program ABAQUS, the phenomenon was quantitatively investigated. Also presented are the effects of various factors such as the ratio of flange slenderness ratio to the web slenderness ratio, the ratio of flange width to the web depth, and the longitudinal stiffeners. A series of comparative studies with various design codes show that the present study provides more accurate and effective design basis in proportioning the flanges and webs.

• 한국강구조학회 논문집
• /
• 제18권3호
• /
• pp.321-329
• /
• 2006

변단면 부재는 Amirikian(1952)에 의해 제안되어 재료 절약적 측면이나 효율적인 구조설계로 인한 경제성 확보를 목적으로 주로 단층의 장스팬 건물이나 빌딩의 켄틸레버 보에 사용되고 있다. 그러나 단면성능만을 고려하여 웨브의 춤을 설계할 때 AISC(201)에서 규정한 변단비를 넘어서거나 비콤팩트, 세장판요소로 설계되어지는 경우가 있어 이에 대한 연구가 필요한 실정이다. 따라서 본 연구에서는 변단비와 판복두께비를 주요 빈수로 한 7개의 실험체를 제작하여 반복하중을 받는 변단면 부재의 국부좌굴 특성을 살펴보았다.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.361-376
• /
• 2019

In this research, bending analysis of a micro sandwich skew plate with isotropic core and piezoelectric composite face sheets reinforced by carbon nanotube on the elastic foundations are studied. The classical plate theory (CPT) are used to model micro sandwich skew plate and to apply size dependent effects based on modified strain gradient theory. Eshelby-Mori-Tanaka approach is considered for the effective mechanical properties of the nanocomposite face sheets. The governing equations of equilibrium are derived using minimum principle of total potential energy and then solved by extended Kantorovich method (EKM). The effects of width to thickness ratio and length to width of the sandwich plate, core-to-face sheet thickness ratio, the material length scale parameters, volume fraction of CNT, the angle of skew plate, different boundary conditions and types of cores on the deflection of micro sandwich skew plate are investigated. One of the most important results is the reduction of the deflection by increasing the angle of the micro sandwich skew plate and decreasing the deflection by decreasing the thickness of the structural core. The results of this research can be used in modern construction in the form of reinforced slabs or stiffened plates and also used in construction of bridges, the wing of airplane.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.561-568
• /
• 2005

본 논문의 목적은 트러스 인장웨브재의 형상이 정방형 각형강관인 기존 연구(강관웨브형)와 고장력 강봉을 인장웨브재로 사용하기 위해 연결플레이트를 가지는(강봉웨브형) 냉간성형 각형강관 갭 K형 접합부의 거동 비교를 통하여 고장력 강봉 사용의 적정성을 알아보기 위한 것이다. 주관폭두께비가 33.3으로 동일한 강관웨브형 실험체 4개와 강봉웨브형 실험체 8개의 최대내력, 파괴모드, 초기강성, 연성율 등을 비교하였다. 비교 결과, 접합부의 내력은 강관웨브형에서는 압축지관의 선행파괴로 결정되었으며, 강봉웨브형에서는 인장측의 선행파괴로 결정되었다. 무차원화 내력은 동일 폭비에서 강관웨브형이 높게 나타났으며, 폭비 증가에 따른 내력증가현상도 강관웨브형에서 뚜렷하게 나타나고, 강봉웨브형은 일정한 경향이 나타나지 않은 반면에 인장과 압축폭비로 나누어 살펴보면 인장폭비 증가에 따라서는 선형적인 증가현상이 나타남을 알았다. 파괴모드는 강관웨브형의 경우에는 압축지관의 미소 국부좌굴과 인장웨브와 주관 접합면의 소성파괴가 나타났고, 강봉웨브형의 경우는 주관플랜지면 소성변형 후 연결플레이트 용접부위의 파단이 나타났다. 따라서, 강봉웨브형에서 연결 플레이트를 갖는 갭K형 접합부의 경우에는 강관웨브형에 비해 주관의 폭두께비를 낮게 할 필요가 있으며, 폭비도 인장지관과 압축지관과의 관계를 고려하여 결정하여야 할 것으로 판단된다.

• Journal of Periodontal and Implant Science
• /
• 제35권2호
• /
• pp.359-369
• /
• 2005

It has been suggested that morphologic characteristics of the periodontium are partly related to the shape and form of the teeth. Furthermore, the severity of symptoms of periodontal disease have been proposed to differ among these various morphologic entities or "biotypes". The purpose of the present study was to examine the relationship between the form of the crowns in the maxillary anterior tooth segment and (1) a group of morphological characteristics and (2) the thickness of the gingiva. The thickness of gingiva was measured by ultrasonic device(SDM). 100 subjects devoid of symptoms of destructive periodontal disease were examined regarding, e.g., probing depth, gingival recession, width of keratinized gingiva, thickness of the keratinized gingiva. From maxillary study cast, the width(at the apical third-CW) and the length(CL) of the crowns of the 6 anterior teeth were determined. A CW/CL-ratio was calculated for each tooth and averaged for each tooth region. The individual mean CW/CL-ratio values for the central incisors were ranked. The 10 subjects ranked highest and the 10 ranked lowest were selected as having either a long-narrow(group N) or a short-wide(group W) form of the crown of the tooth. The data for each of the examined parameters were averaged for each tooth region in each subject and mean values for subjects in groups W and N were compared using the Student t-test. Stepwise multiple regression analysis, including data from the whole sample, was performed for each tooth region with the thickness of the free gingiva as the dependent variable. The results from the analyses demonstrated that individuals with a long-narrow form of the central incisors displayed, compared to individuals with a short-wide crown, form (l) a narrow zone of keratinized gingiva, (2) a pronounced "scalloped" contour of the gingival margin. There was no significant difference between groups N and W with respect to the thickness of the keratinized gingiva. The CW/CL-ratio data revealed that a certain form of the crowns in the central incisors was accompanied by a similar form in the lateral incisors and canine tooth region. The regression analyses demonstrated that the thickness of the keratinized gingiva in central, lateral incisors and canines was significantly related to the width of the keratinized gingiva.