• 한국환경복원기술학회지
• /
• 제13권3호
• /
• pp.36-45
• /
• 2010

To analyze the relationship between climatic factors (monthly mean temperature and total precipitation) and tree-ring growths of Quercus mongolica Fischer (Mongolian oak) with different topographic sites in Mt. Worak, more than 10 trees were selected from each of seven stands. Two cores from each tree were measured for ring width. After crossdating, each ring-width series was double standardized by fitting first a negative exponential or straight regression line and secondly a 60-year cubic spline. Seven stands were categorized in two groups using cluster analysis for tree-ring index patterns. Cluster I (four stands) was located in higher elevation (550-812 m) with aspects of east, west and northwest, and cluster II (three stands) was located in rather lower election (330-628 m) with aspects of north and northwest. The aspects of two clusters were not significantly different. Response-function analysis showed a significant positive response to March precipitation for both clusters. It indicates that moisture supply during early spring season is important to radial growth because the cambial growths of ring-porous species, such as Mongolian oak, start before leaf growth. Cluster II showed a positive response to the precipitation of middle and late growing season, too.

• The Korean Journal of Ecology
• /
• 제19권4호
• /
• pp.285-294
• /
• 1996

Ring-width chronologies of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) from two experimental forest plots in Kaunas, Lithuania were developed to study tree growth-climate relationship in different geohydrological conditions using response function analysis. The tree ring-width chronologies of Scots pine ranged from 1883~1987 A.D. and 1864~1989 A.D., and Norway spruce 1838~1987 A.D. and 2870~1989 A.D., respectively. The response function analysis has vividly demonstrated that the growth of Scots pine is favoured by warm summer and Norway spruce by cool and moist summer. Spring temperature has shown direct relationship with tree growth of both the species. There also exists notable intraspecies analogies in growth responses except some minor differences.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.222-225
• /
• 2002

Microwave dielectric properties of the layered and functionally graded materials (FGMs) of $Mg_{0.93}Ca_{0.07}TiO_3$ (MCT) and $(Ca_{0.3}Li_{0.14}Sm_{0.42})TiO_3$(CLST) were investigated as a function of the volume ratio of two components. Dielectric constant was decreased with an increase of the volume ratio of MCT which had a lower dielectric constant thant CLST. For the layered FGMs specimens, the difference of thermal expansion coefficients between two components induced thermal strain to dielectric layers, which was confirmed by the plot of ${\Delta}$k (X-ray diffraction peak width0 versus k (scattering vector) using the double-peak Lorentzian function, f(x). Quality factor of the specimens was affected by the thermal strain of dielectric layer, especially MCT layer. For the specimen with the volume ratio of MCT/CLST = 2, the qulaity factor of the specimen showed a minimum value due to the maximum thermal strain fo MCT layer.

• 한국생활과학회지
• /
• 제12권5호
• /
• pp.787-795
• /
• 2003

This research studied several somatotypes for children's upper bodies in order to suggest the basic data of bodice patterns of children's clothing. By extracting the component factors from the children's bodices, they were classified into several somatotypes to recognize an individual body type. Three hundred and fifty eight children's wears were estimated as research objects to analyze their somatotypes for the 44 items representing upper bodies through anthropometric measurement and photometric measurement. The results are as follows : 1. Seven factors were extracted as a result of factor analysis. 2. Data were classified into three types as a result of cluster analysis : Type 1 was characterized as low fat body, small skeleton size, and forward belly ; type 2 as high fat body, normal hight, backward shoulder, and the lowered shoulders ; type 3 as medium fat body, tall height, somewhat crouching back, and the rising shoulders. 3. As a results of the discrimination analysis for the three types, the highly discriminated items were height, width of bosom, front center length. weight, width of waist or the length of waist. One could discriminate one's own body type by obtaining the classification function from these five items.

• 정보처리학회논문지B
• /
• 제8B권5호
• /
• pp.565-572
• /
• 2001

위치와 주파수 불확실성 곱이 작은 해석함수는 영상처리와 압축에 많은 장점이 있다. 지금까지의 불확실성원리에 기초하여 이 값을 계산하였으나, 이러한 측정은 최대 응답주파수가 0 이 아닌 인간시각필터에서 적절한 주파수 불확실성의 측정방법이 될 수 없다. 최대 응답을 갖는 주파수에 대한 주파수 불확실성을 계산하는 새로운 측정방법을 이용하여 결합유효폭을 유도하고자 한다. 결합변수가 커지면 많은 함수들의 결합유효폭이 0.5로 수렴하는 해석 결과를 얻었으며, 고려 대상 중에서 Gabor cosine 함수가 우수한 성능을 보였다.

• Steel and Composite Structures
• /
• 제33권6호
• /
• pp.767-776
• /
• 2019

In this article, a simple and robust multi-objective assessment method to control design angles and node positions connected among steel outrigger truss members is proposed to approve both structural safety and economical cost. For given outrigger member layouts, the present method utilizes general-purpose prototypes of outrigger members, having resistance to withstand lateral load effects directly applied to tall buildings, which conform to variable connecting node and design space deposition. Outrigger layouts are set into several initial design conditions of height to width of an arbitrary given design space, i.e., variable design space. And then they are assessed in terms of a proposed multi-objective function optimizing both minimal total displacement and material quantity subjected to design impact factor indicating the importance of objectives. To evaluate the proposed multi-objective function, an analysis model uses a modified Maxwell-Mohr method, and an optimization model is defined by a ground structure assuming arbitrary discrete straight members. It provides a new robust assessment model from a local design point of view, as it may produce specific optimal prototypes of outrigger layouts corresponding to arbitrary height and width ratio of design space. Numerical examples verify the validity and robustness of the present assessment method for controlling prototypes of outrigger truss members considering a multi-objective optimization achieving structural safety and material cost.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.149-159
• /
• 1996

Multipurpose development of the coast and ocean can be considered as multifunction construction combining the functions of coastal protection, waterfront amenity and creation or rehabilitation of habitats. Multfunction development of coastal and ocean spaces can be accomplished by applying the ecosystem control structure of artificial habitats which will cultivate fishing ground with ecological harmony to the coastal protection system. To evaluate the applicability of ecosystem control structures as as fundamental coastal protection structure, wave control function of the structure is studied by numerical and physical analyses. Dimensional analysis and hydraulic experiment point out the importance of width and crest depth of ecosystem control structure, construction water depth and wave steepness. Wave control efficiency is estimated by the attenuation coefficient $(K_H)$ according to wave steepness $(H_0/L_0)$, relative constructed water depth $(h_i/H_0)$, relative berm width $(B/L_0)$ and relative crest depth $(h_B/H_0)$ of eosystem control structure. Empirical fomulas are suggested based on the results of model test by applying the multiple model based on this experimental results and numerical wave shoaling-dissipation-breaking model appears to be valid for the analysis of wave transformation around ecosystem control structure in the coastal waters.

• 한국멀티미디어학회논문지
• /
• 제8권2호
• /
• pp.174-180
• /
• 2005

영상에서 신호가 급격히 변화하는 지점은 영상의 특징을 분석함에 있어서 가장 중요한 요소이며, 영상의 위치와 모양 등에 대한 다양한 정보를 포함하고 있다. 그러므로, 이러한 에지를 검출하기 위한 많은 연구가 이루어져 왔으며, 초기에 사용한 에지 검출 연산자는 인접한 화소들 사이에 대한 관계를 이용하는 것이었다. 이 와 같은 방법들은 모든 경계 지점에서 에 지를 검출하므로, 라인-에지와 같은 일정한 폭 이하의 곡선에 대해서도 에지의 중복 검출을 수행한다. 한편, 최근 신호처리 분야에서 새로운 기법으로 제시된 웨이브렛 변환은 멀티스케일 에지 검출이 가능하며, 영상에서 에지를 포함한 특징들을 분석하는 분야에 널리 응용되고 있다. 따라서, 본 논문에서는 라인 폭에 의존하지 않는 새로운 2-D 웨이브렛 함수를 사용하여, 영상에 존재하는 다양한 폭의 곡선에서 라인-에지 성분을 검출하였다.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1592-1596
• /
• 2010

IGZO (indium gallium zinc oxide) 박막트랜지스터는, 활성층 채널의 폭과 길이의 비가 고정된 경우에도, 채널 길이가 길어지면 게이트전압에 대한 드레인 전류의 특성곡선이 양의 전압 방향으로 이동하고 전계효과이동도는 낮아졌다. 채널의 길이와 폭이 고정된 상태에서는, 드레인이 전압 높은 경우에 전계효과이동도가 낮고 문턱아래 기울기가 큰 특성을 보였다. 이러한 현상은 IGZO 채널층의 일함수가 커서 소스/드레인 전극과 채널층의 접합부 띠굽음이 규소반도체의 경우와 반대방향으로 나타나는 것에 기인하는 것으로 해석된다.

• 한국자기학회지
• /
• 제22권3호
• /
• pp.73-78
• /
• 2012

본 연구에서는 Argyres-Sigel의 투영 연산자 방법을 단일 벽 탄소 나노튜브(SWNT)의 zigzag(10,0)에 직접 적용하여 이를 운동방정식의 형태로 만들어 선모양 함수를 구하는 방법을 사용하였다. 선모양 함수의 실수 부분인 선 너비는 저온 영역(T < 200K)에서 온도의 영향에 거의 무관한 것으로 조사되었다. 이는 온도에 관여하는 페르미-디랙 분포함수가 선모양 함수에 거의 영향을 작용하지 않기 때문인 것으로 생각된다. 고온 영역(T > 200K)에서는 선 너비가 다소 단조롭게 증가하는 것으로 나타났으며, 이는 음향 포논의 영향에 기인하는 것으로 보인다. 그리고 SWNT의 전자스핀이완 시간은 $1.4{\times}10^{-6}\;s$으로 계산되었다.