• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.208-213
• /
• 2009

본 논문에서는 Tree-ring width 지표자료, 태양흑점수, 남방진동지수(SOI) 및 지구온도 아노말리 자료와의 비교를 통하여 서울지점 측우기 강우량 자료의 정확도를 가늠해 보았다. 그리고 한반도 인근지역의 Tree-ring width 지표자료와의 비교를 통하여 과거 동북아시아 기후변화 상관성과 변화특성을 파악해 보았다. 분석 결과 측우기 강우량 자료는 다른 비교분석 대상 자료들과 경향성과 변화심도가 매우 잘 일치하고 있어 상당한 신뢰성을 가지고 있음이 확인되었다. 그리고 한반도 주변 6개 지점의 Tree-ring width 지표자료와의 비교분석결과, 장기적으로 동북아시아 기후는 시공간적으로 밀접한 상관을 가지고 변화하고 있으며 그 변화에는 장주기적인 재현성이 존재한다는 점을 알 수 있었다. 그러나 1960년 이후의 기후변화 특성은 통계적인 거동특성이나 변화폭이 과거의 재현사상의 한계를 넘지는 않으나 과거와는 다른 경향성과 불규칙성을 보여주고 있으며 재현주기도 짧아지고 있어 과거와는 다르게 나타나는 것으로 분석되었다. 과거자료에 근거한 본 연구의 결과는 동북아시아 기후변화 장기 예측에 있어 유용하게 이용될 수 있을 것으로 판단된다.

• 치과방사선
• /
• 제13권1호
• /
• pp.107-115
• /
• 1983

This study was performed in order to analyse the morphology of maxillary sinus on orthopantomogram. The author anlaysed the anterior-posterior width of mesial wall, the extension of anterior margin in maxillary sinus and the interrelation between the root apex of maxillary 1st molar and sinus floor. The films consisted of 514 orthopantomograms divided into three groups ranging the 3rd decade, 4th and 5th decade and 6th decade. The obtained results were as follows: 1. The mean dimensions of the anterior - posterior width of mesial wall were 43.81±4.55㎜ for male and 43.80±4.49㎜for female in the right of maxillary sinus, 43.75±74㎜ for male and 43.37±3.92㎜ for female. 2. With age, the dimensional change of the anterior - posterior width of mesial wall in maxillary sinus was not observed. 3. The extension order of anterior margin of the maxillary sinus was distal to canine side, 1st premolar mesial side, canine mesial side, and 1st premolar distal side. 4. In the distance between the root apex of upper 1st molar and the maxillary sinus floor, the degree of closeness was more increased in the older-aged group than in the younger-aged group.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1520-1527
• /
• 2005

In order to investigate the effect of improvement with bamboo mats on dredged fills, several tests were performed with different widthes (0.0B, 0.5B, 1.0B, 2.0B). The results indicate that the failure modes of the models without bamboo mats are close to local shear failure, and change to general shear failure as the width of a bamboo mat increases. A series of tests with four different widths (0.0B, 0.5B, 1.0B, 2.0B) were carried out on the models which have no desiccated surface layers, to find out the width that the general shear failure might occur. Finally, a series of tests with this width were performed on the models with three different desiccated surface layers (3cm, 5cm, 10cm). Throughout the tests, strength and deformation according to the thickness of desiccated surface layer was investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.136-141
• /
• 2000

A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally studied in 760 mm long and 100 mm wide test sections with 2.0 and 3.0mm gaps. The resulting data have been compared to previous transition models. For the transition from bubbly to slug flow the superficial velocity of gas increased as the gap width increased. The comparison of experimental data to the transition model developed by Taitel and Barnea showed relatively good agreement for the bubbly-to-slug transition in the case of 2mm gap width. For the criteria of Mishima and Ishii to be applicable to the slug-to-churn transition the distribution parameter should be well defined for narrow channels. Even though the gap width of narrow channels increased the superficial gas velocity did not change for the transition form chum to annular flow regime. For the chum-to-annular transition the model of Taitel and Barnea showed discrepancies with experimental data, especially in the channel with larger gap.

• 한국레이저가공학회지
• /
• 제3권2호
• /
• pp.35-43
• /
• 2000

Laser direct patterning of the coated photoresit (PMER-NSG31B) layer was studied to make halftone dots on gravure printing roll. The selective laser hardening of photoresist by Ar-ion laser(wavelength : 333.6nm∼363.8nm) was controlled by the A/O modulator. The coating thickness in the range of 5㎛∼11㎛ could be obtained by using the up-down directional moving device along the vertically located roll. The width, thickness and hardness of the hardened lines formed under laser power of 200∼260㎽ and irradiation time of 4.4∼6.6$\mu$ sec/point were investigated after developing. The hardened width increased according to the increase of coating thickness. Though the hardened thickness was changed due to the effect of the developing solution, the hardened layer showed good resistance to the scratching of 2H pencil. Also, the hardened minimum line widths of 10㎛ could be obtained. The change of line width was also found after etching, and the minimum line widths of 6㎛ could be obtained. The hardened lines showed the good resistance to the etching solution. Finally, the experimental data could be applied to make gravure halftone dots using the developed imaging process, successfully.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.183-189
• /
• 2006

Many researchers have recently proposed various parameters, variables of models and experimental methods to evaluate fracture properties of concrete, and their developments allow us to analyze the non-linear and quasi-brittle fracture mechanisms. This paper presents a brief treatment of the fracture parameters. Additionally, three-point bending tests were conducted to compare J-integral($J_{Ic}$) with other parameters($K_{Ic},\;G_{Ic},\;and\;G_F$). The change in parameter values with respect to the width and notch length of concrete beam specimens was also considered. The load-displacement curves were used to measure the concrete fracture toughness experimentally. From the results of experiment, it was found that the value of $G_F\;and\;J_{Ic}$ decreased as the notch depth increased and that $G_F$ was less sensitive than $J_{Ic}$. Therefore, the former, $G_F$, is more appropriate in using it as the concrete fracture toughness parameter. The values of $G_F\;and\;J_{Ic}$ increased when the width of concrete specimens increasing from 75 mm to 150 mm. Thus, the effects of the specimen width should be considered in determining the fracture toughness of concrete.

• 한국지반환경공학회 논문집
• /
• 제13권3호
• /
• pp.13-19
• /
• 2012

최근 기상이변에 의해 대형 태풍과 집중 호우가 발생하게 되었고, 이로 인한 이상 홍수로 인해 제방 붕괴를 일으켜 인근지역에 직접적인 큰 재산피해와 인명피해를 가져오게 되는 일이 적지 않다. 본 논문에서는 하천제방 단면의 주요 특성치인 제방 둑마루 폭, 비탈면 경사도, 제방 높이의 변화에 따른 수치해석을 실시하였고, 유출부 동수경사를 분석하여 제방에 대한 안정성 검토를 실시하였다. 그 결과 비탈면 경사의 확대가 둑 마루폭 증가보다 유출부 영역에서의 동수경사 감소 효과를 더 크게 나타나는 것으로 평가되었다. 즉, 하천 제방 설계 및 보강 시 비탈면 경사의 확대가 둑 마루폭 증가보다 더 효과적인 것으로 판단된다.

• ETRI Journal
• /
• 제33권3호
• /
• pp.335-343
• /
• 2011

The pad pitch of modern radio frequency integrated circuits is in the order of few tens of micrometers. Connecting a large number of high-speed I/Os to the outside world with good signal fidelity at low cost is an extremely challenging task. To cope with this requirement, we need reflection-free transmission lines from an on-chip pad to on-board SMA connectors. Such a transmission line is very hard to design due to the difference in on-chip and on-board feature size and the requirement for extremely large bandwidth. In this paper, we propose the use of narrow tracks close to chip and wide tracks away from the chip. This narrow-to-wide transition in width results in impedance discontinuity. A step change in substrate thickness is utilized to cancel the effect of the width discontinuity, thus achieving a reflection-free microstrip. To verify the concept, several microstrips were designed on multilayer FR4 PCB without any additional manufacturing steps. The TDR measurements reveal that the impedance variation is less than 3 ${\Omega}$ for a 50 ${\Omega}$ microstrip and S11 better than -9 dB for the frequency range 1 GHz to 6 GHz when the width changes from 165 ${\mu}m$ to 940 ${\mu}m$, and substrate thickness changes from 100 ${\mu}m$ to 500 ${\mu}m$.

• 한국해안해양공학회지
• /
• 제5권3호
• /
• pp.198-203
• /
• 1993

유공방파제의 반사특성을 규명하기 위하여 파고 및 주기가 다른 여러 규칙파를 대상으로 유수실의 폭과 유공벽의 형태를 변화시키며 수리실험을 수행하였다. 실험결과, 유공방파제의 반사특성은 유수실 폭과 유수실내 파장의 비(B/L$_{c}$)에 민감하게 반응하며, B/L$_{c}$가 0.2인 부근에서 최소의 반사율을 보임을 알 수 있었다. 이러한 현상은 주로 유수실내에서의 공진현상에 기인한 것으로 판단된다. 유공벽형태(종슬리트, 횡슬리트 또는 원형 구멍)의 변화는 반사율면에 있어서 약간의 변화를 초래할 수는 있어도, 전반적인 반사특성 변화에는 영향을 주지 못함을 확인하였다.하였다.

• 대한가정학회지
• /
• 제32권2호
• /
• pp.219-230
• /
• 1994

The purpose of this comparative research is to investigate the change of the drafting method of the basic patterns for women in Korea. Followings were the findings of this research: 1) The concept of the basic pattern could be found after the first of the 1950s and there was introduction of the many basic patterns. At first measurement couldn't be found. Gradually the personal body type could be expressed in the basic pattern through the practical measurements such as the width of highest bust level and the length of neck to bust. 2) Through the ages the changes of the basic patterns were between 1950,60s and 1980,90s distinctively at the back width back shoulder angle front and back shoulder height from biceps line back neck ratio(height/width) BP position at the biceps line the amounts of underarm dart underarm dart position from the biceps lines and front ease angle at BP line. 3) 4 Grouping the types of the basic pattern followings are their characters; 1st Munwha or Doreme style 2nd waist dart group 3rd underarm dart and rectangular front ease 4th the usage of many measurements like as front length upper bust girth etc.