• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.263-267
• /
• 2014

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2017

In this study, novel approximate form of the square-root operator of three dimensional acoustic Parabolic Equation (3D PE) is proposed using a rational approximant for two variables. This form has two advantages in comparison with existing approximation studies of the square-root operator. One is the wide-angle capability. The proposed form has wider angle accuracy to the inclination angle of ${\pm}62^{\circ}$ from the range axis of 3D PE at the bearing angle of $45^{\circ}$, which is approximately three times the angle limit of the existing 3D PE algorithm. Another is that the denominator of our approximate form can be expressed into the product of one-dimensional operators for depth and cross-range. Such a splitting form is very preferable in the numerical analysis in that the 3D PE can be easily transformed into the tridiagonal matrix equation. To confirm the capability of the proposed approximate form, comparative study of other approximation methods is conducted based on the phase error analysis, and the proposed method shows best performance.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.35-38
• /
• 2017

A thermally responsive hydrogel has reversibility with temperature during swelling. Here, we proposed origami inspired temperature sensor by using multi-layered hydrogel film. The formation of patterned stripes on microscale film drives bending to an angle that can be controlled linearly. Although temperature range was not wide, measured sensitivity of sensors has high resolution and accuracy. It providing a powerful platform for the design of sensitive sensors and that easily adapt other type of sensors in microscale.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.919-922
• /
• 2004

The Field Emission Display is potentially an excellent display with high brightness and low power consumption with wide viewing angle but more work is still needed in order to identify the ideal electron emitter for such displays. This paper will review the work that we have carried out in Cambridge aver the past couple of years on optimisation of Carbon nanotubes for use as the cold cathode emitters that are possible candidates as the electron sources in second generation FEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.209-212
• /
• 2004

A navel fast-switching LCD with dual-domain bend (DDB) mode is described DDB alignment is achieved using antiparallel-rubbed cell filled with chiral-doped LC. Initial alignment is mono-domain 180-degree twist. Tilt direction is controlled by oblique electric field to be counter direction in each domain Twist-to-DDB deformation occurs continuously so that DDB mode does not require high-voltage initialization which is inevitable in Optically Compensated Bend (OCB) mode. DDB gives wide and symmetric viewing angle in contrast to mono-domain bend formed from 180-degree twist showing strong asymmetry.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.82-86
• /
• 1990

A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.151-165
• /
• 1998

We investigated the optical properties of 3-component zoom camera lens whose character is being compact and having wide angle. Also, we calculated paraxial design condition and locus of each component by using Gaussian Bracket.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.648-651
• /
• 1996

Samsung Electronics has developed high performance velocity and position controller for induction motors, and succeeded in mass production for the first time in Korea. Dynamic performance and final control accuracy of the controller are equivalent to those of AC servo motor controller. At present, we adopted the controller as spindle motor drive for Samsung CNC systems, and expect its wide use in industry as general purpose velocity and position controller for induction motor.

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.6-11
• /
• 2005

In this paper, a general performance of the PSS-LCD or Polarization Shielded Smectic Liquid Crystal Display is discussed. This smectic base LCD does not use any spontaneous polarization, but uses induced polarization just sa me with current nematic base LCDs. Specific initial molecular alignment as well as specific cell design realizes ext remely fast optical response speed with native wide viewing angle. Moreover, this performance is provided by full compatible electronics for current conventional LCDs. A general performance of the PSS-LCD is introduced herein.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1067-1070
• /
• 2005

A large size flat panel LCD-TV must fulfill different requirements than a desktop LCD-monitor: The contrast must be much larger, the viewing angle should be as wide as possible and the switching times must be shorter to allow moving pictures to be displayed naturally. The "Vertically Aligned" technology is most promising to realize such a product. LC-material development for this technology began at Merck about 10 years ago. New materials based on the 1,1,6,7-tetrafluoroindane skeleton were recently synthesized via ortho-metallation and intramolecular Heck cyclization followed by an oxidative fluorination procedure. The materials offer improved properties over liquid crystals currently employed in flat panel LCD-TVs.