• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.337-341
• /
• 2011

To expand the viewing angle of vertical alignment liquid crystal display (VA-LCD), a wide-band compensation film has been newly developed. VA-LCD needs a retardation film with improved oblique viewing property. The retardation film for VA-LCD has been fabricated by solvent casting and subsequent drawing triacetylcellulose (TAC) containing optical additives. Here, optical birefringence and wavelength dispersion of the retardation film strongly depend on the chemical structures of optical additives. Utilizing quantum mechanical computation, the polarizing anisotropy of retardation film was calculated with respect to additives. It is also realized that the wavelength dispersion of polarizing anisotropy depends on the type and location of substituent to the selected main isomer. When two propionates are substituted to the meta position of the selected main isomer, the wavelength dispersion of polarizing anisotropy shows the most gentle slop, which is well matched with the experimental results. The most gentle slop of wavelength dispersion means that the viewing angle characteristics of LCD are less influenced according to the wavelength of light source of LCD, and it's possible to make better image quality than the present level.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.260-272
• /
• 2000

In this paper, we propose a simple auto calibration method for a CCD camera with wide an91e lens that causes high degree of distortion. We formulate a cubic warping equation for the relationship between the cross points on the distorted calibration target and the corresponding points from the standard grid image, and calibrate distorted images using the computed parameters. The experiment has been performed with the distorted images resulted from wide angle CCD camera. The experimental results show that the proposed method, in terms of the average and maximum distorted error, has higher accuracy than the existing methods because of maintaining the calibration ratio more than 95 percent. The proposed method is applicable to wide variety of images regardless a type of lens or distortion.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.63-67
• /
• 2002

In this paper we analyzed the optical property after we chose the lens system to cover a wide angular field which is designed to use a established designed meniscus negative outer element. The special quality of the system is to offer a wide angular field by getting only one outer negative element and to be a compacted optical system to utilize the good point of miniaturization and light-weighturization by using two aspheric surfaces. Also, we observed the aberration correction of a aspheric as we investigated two aspheric's forms to use for a aberration correction.

• Journal of Animal Science and Technology
• /
• v.62 no.3
• /
• pp.306-312
• /
• 2020

Korean army dogs are raised for special purposes and have contributed much to society. However, several diseases occur in dogs. Canine hip dysplasia (CHD) is a musculoskeletal disorder that occurs frequently in Korean army dogs and interferes with their activities. If we could control CHD, this would have a positive effect on their performance. This study performed a genome-wide association study (GWAS) in 69 Korean army dogs to find significant loci for CHD using 170K single nucleotide polymorphisms (SNPs). CHD was classified according to the Norberg angle criterion. The control group comprised 62 dogs classified as relatively normal, and 7 dogs with severe CHD formed the case group. From the GWAS analysis, we concluded that SNPs present on chromosome 4 might have a significant impact on the overall expression of canine hip dysplasia.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1176-1187
• /
• 2015

This work proposes a highly efficient sensorless motor driver chip for various permanent-magnet synchronous motors (PMSMs) in a wide power range. The motor driver chip is composed of two important parts. The digital part is a sensorless controller consisting mainly of an angle estimation block and a speed control block. The analog part consists of a gate driver, which is able to sense the phase current of a motor. The sensorless algorithms adapted in this paper include a sliding mode observer (SMO) method that has high robust characteristics regarding parameter variations of PMSMs. Fabricated SMO chips detect back electromotive force signals. Furthermore, motor current-sensing blocks are included with a 10-bit successive approximation analog-to-digital converter and various gain current amplifiers for proper sensorless operations. Through a fabricated SMO chip, we were able to demonstrate rated powers of 32 W, 200 W, and 1,500 W.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.235-242
• /
• 2009

In this paper a new asymmetrical PWM bidirectional half bridge converter is proposed. The proposed converter has simple structure and wide duty cycle range, and therefore is suitable for applications such as fuel cells which have wide voltage variation. With the proposed asymmetrical PWM method the current rating of switch and transformer is significantly reduced compared to the conventional phase angle control method, and ZVZCS and synchronous rectification can also be achieved. This could result in high efficiency and high power density. The proposed converter is analytically compared to the conventional converter, and the proposed method was validated through the experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.525-530
• /
• 2003

This paper is concerned with a control allocation strategy using the dynamic inversion which generates the nominal control input trajectories, and autopilot design using the time-varying control technique which is time-varying version of pole placement of linear time-invariant system for an agile missile with aerodynamic fin and thrust vectoring control. Dynamic inversion can decide the amount of the deflection of each control effector, aerodynamic fin and thrust vectoring control, to extract the maximum performance by combining the action of them. Time-varying control technique for autopilot design enhance the robustness of the tracking performance for a reference command. Nonlinear simulations demonstrates the dynamic inversion provides the effective nominal control input trajectories to achieve the angle of attack command, and time-varying control technique exhibits good robustness for a wide range of angle of attack.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.198-201
• /
• 2004

We have developed a multi-domain vertically aligned liquid crystal display (MVA-LCD) that produces natural gray-scale images even at high viewing angles. We divided each pixel into two areas and set different threshold voltages for each sub-area. A transparent electrode in a sub-area is not connected directly to the source electrodes but via the capacitance of the SiN layer. In particular, light-orange skin color appears very natural, even at a high inclination angle. The contrast ratio is over 500 in the normal direction and over 10 from any viewing angle.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.524-528
• /
• 2002

Conventional hybrid aligned nematic liquid crystal display (HAN-LCD) has several advantages on low operating voltage, fast response time and rubbing free on one substrate. We have fabricated a new hybrid aligned nematic display driven by fringe field. The new device exhibits much wider viewing: angle than that of the conventional HAN mode, owing to almost in-plane rotation of the LC director. Furthermore, we have developed the device that reveals more efficient electro-optic characteristics by placing common electrode on top and bottom substrates. In this paper, the electro-optic characteristics of the novel cell are investigated.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.201-208
• /
• 1999

This paper presents the degradation of the system performance according to the vmiation of the rotor time constant. The algorithm for the on-line estimation of rotor time constant is proposed. which is applied to the consistent relationship between the tangent torque angle of the synchronous reference frame and that of stationary reference f frame. For the purpose of the validity of proposed algorithm. the computer simulation and the experiments have been p performed.