• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.35-43
• /
• 2016

A compact ultra-wide band antenna with a quadruple band-notched characteristic is proposed. The proposed antenna consists of a slotted trapezoid patch radiator, an inverted U-shaped band stop filter, a pair of C-shaped band stop filters, and a rectangular ground plane. To realize the quadruple notch-band characteristic, a U-shaped slot, a complementary split ring resonator, an inverted U-shaped band stop filter, and two C-shaped band stop filters are utilized in this antenna. The antenna satisfies the -10 dB reflection coefficient bandwidth requirement in the frequency band of 2.88-12.67 GHz, with a band-rejection characteristic in the WiMAX (3.43-3.85 GHz), WLAN (5.26-6.01 GHz), X-band satellite communication (7.05-7.68 GHz), and ITU 8 GHz (8.08-8.87 GHz) signal bands. In addition, the proposed antenna has a compact volume of $30mm{\times}33.5mm{\times}0.8mm$ while maintaining omnidirectional patterns in the H-plane. The experimental and simulated results of the proposed antenna are shown to be in good agreement.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.7-12
• /
• 2005

A compact microstrip band-selective filter for ultra-wideband (UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator bandstop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band (3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is 29% reduction in footprint compared to the traditional bandstop filter using L-shaped resonators. The measured results show that the filter has a wide passband of 146.7 % (2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of 7.42 % (5.32 GHz to 5.73 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.193-196
• /
• 2000

A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band. The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method has a cutoff frequency of 0.9 CHz with a 0.01 dB ripple level. The coupled line type low-pass filter with strip line configuration was fabricated by using a high-temperature superconducting (HTS : YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on MgO(100) substrate. Since the HTS coupled tine type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 6.2 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency.

• 한국전자파학회논문지
• /
• 제17권2호
• /
• pp.89-94
• /
• 2006

본 논문에서는 초광대역(UWB: Ultra-Wideband) 무선 통신 시스템에 적합한 소형의 마이크로스트립 대역 저지 필터를 제안한다. 제안된 필터는 $50{\Omega}$ 마이크로스트립 선로 좌측에 단락 스터브(short-circuited)를 이용한 고역 필터와 우측에 결합 공진기를 이용한 대역 저지 필터를 합성하였다. 3.1 GHz에서 10.6 GHz까지의 초광대역 특성을 갖는 고역 필터를 설계하기 위해서 the mixed lumped/distributed(L/D) 방법을 이용하였다. 또한 원하는 주파수 대역의 협대역 저지 필터를 설계하기 위해서 3개의 결합 공진기(coupled resonator)를 이용하였다. 공진기를 미앤더(meander) 형태로 구현함으로써 L-형태의 공진기에 비해 면적을 $29\%$ 정도 소형화시켰다. 측정 결과 3-dB 삽입 손실을 기준으로 $146.7\;\%(2.1\;GHz{\sim}10.15\;GHz)$의 광대역 통과 특성을 얻었으며 $10.04\;\%(5.2\;GHz{\sim}5.75\;GHz)$의 저지 대역을 나타내었다. 측정된 군 지연(group delay) 특성은 저지 대역을 제외한 주파수 대역에서 0.7 ns 미만이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.751-755
• /
• 2003

In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.43-46
• /
• 2011

A novel circuit structure of dual-band bandstop filters is proposed in this paper. This structure comprises two shunt-connected tri-section stepped impedance resonators with a transmission line in between. Theoretical analysis from the equivalent circuit and design procedures are described. We represented graphs for filter design from the derived synthesis equations by resonance condition of circuits. Notably, advantages of the proposed filter structure are compact size in design, wide range of realizable resonance frequency ratio, and more realizable impedances.

• 한국전자파학회논문지
• /
• 제13권10호
• /
• pp.1071-1077
• /
• 2002

본 논문에서는 두 마이크로스트립 라인으로 이루어진 압축된 마이크로스트립 PBG 링 구조에서 두 마이크로스트립 라인간의 간격변화에 따른 삽입손실 특성을 연구하였다. 두 라인이 가까워짐에 따라 라인간의 커플링으로 인하여 두 개의 감쇄폴이 생겨 넓은 저지대역을 가지며 갭 간격이 매우 가까워지면 2개의 감쇄폴이 3개로 늘어나 저지대역은 매우 넓어지고 cutoff특성 또한 향상된다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.293-295
• /
• 2003

In this paper, planar harmonic rejection low-pass filter is proposed to effectively suppress spurious response in stop-band. For suppress the unwanted signal such as spurious and harmonics, we presented a new design method controlled the higher order modes. The proposed low-pass filter was shown to suppress the spurious response by more than $20{\sim}40dB$ compared with conventional microstrip low-pass filters. The filter is evaluated by experiment and simulation with good agreement and shown to have attractive properties such as wide stop band range and low insertion loss.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.78-81
• /
• 2000

A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method Ins a cutoff frequency of 0.9 GHz with a 0.01 dB ripple level. The coupled line type low-pass filter with stripline configuration was fabricated by using a high-temperature superconducting (HTS ; $YBa_2Cu_3O_{7-x}$) thin film on MgO(100) substrate. Since the HTS coupled line type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 62 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency Bemuse of good rejection of the spurious signals and harmonics, our low-pass filter is applicable to mobile base station systems such as cellular, personal communication systems and international mobile telecommunication(IMT)-2000 systems.

• 한국전자파학회논문지
• /
• 제18권7호
• /
• pp.704-709
• /
• 2007

본 논문에서는 UWB 시스템에 적용하기 위한 CPW 대역 통과 여파기를 제안하였다. 제안된 여파기는 특성 임피던스 $50{\Omega}$을 갖는 전송 선로에 슬롯만을 형성하여 대역 통과 특성을 갖도록 구현하였다. 설계된 대역 통과 여파기는 무선 랜 주파수 대역에서의 협대역 저지 특성을 얻기 위해 CPW 접지면에 두 쌍의 반파장 슬롯 공진기를 이용한 대역 저지 여파기와 결합하였다. 제작된 대역 통과 여파기는 $15.35{\times}13.60mm$의 작은 크기로 주파수 통과 대역은 3-dB 삽입 손실을 기준으로 $2.8{\sim}9.8GHz$이며 $5.15{\sim}5.71GHz$의 협대역 저지 대역을 갖는다. 또한, 군 지연 특성은 저지대역을 제외한 통과 대역 내에서 400 psec 이하를 나타낸다.