• Transactions on Electrical and Electronic Materials
• /
• v.10 no.5
• /
• pp.173-176
• /
• 2009

In the stator windings of a 6.6 kV rotating machine, internal discharges, slot discharges, and surface discharges are mainly caused by internal voids and insulation degradation. If a partial discharge(PD) occurs in an inner-part of the stator windings, it will cause electromagnetic pulses with wide frequency ranges. Discharge sparks and electromagnetic pulses generated from a discharge source, can be detected using various RF resonators like an EM sensor. In order to detect these types of electromagnetic sources, a planar patch sensor was designed and fabricated using a CST-MWS simulation, and PD signals from an artificially defected stator winding were also measured by the sensor proposed in this study. Furthermore, an HFCT was used as a reference sensor and compared with the proposed new planar patch sensor. In the results of the experiment, the planar patch sensor showed a similar performance to the HFCT sensor.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.219-224
• /
• 2004

In This paper, we have analyzed the power spectrum of DS-TH Ulhawideband (Direct Sequence-Time Hopping UWB) system which used pseudo-noise (PN) code. The DS-TH UWB system proposed in this paper multiplies the information signal with PN code to construct pulse train with random pattern and then the chips in pulse train are bundled into several groups to map to the particular value. The (+)/(-) pulse is tented in the time slot of frame by comparing a particular value with timing information that was stored in the lookup table. Thus, the energy spark (Comb Line) which is generated certainly in convantional system can be suppressed efficiently by PN code. And we knew that the proposed DS-TH UWB System even could have very smoothing power spectrum ctaracteristic without applying high speed Time-Hopping code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.2
• /
• pp.71-77
• /
• 1982

This poper proposes the method of the balanced-mixer realization in the X-Band frequency range by the MIC coplanar magic-tee. This magic-tee is composed with microstrip and slot, as suggested by Ronde. The characteristics of balancing and isolation in this magic-tee is more preferable to those of the rat-race or hybrid ring in the wide frequency range. So, experimentally in this paper the characteristics of the MIC balanced-mixed are obtained with the VSWR less than 1, 2(in Local and Signal Arms) and the Conversion Loss, 6 dB in that frequency range, when the mixer is designed in the 3rd order (in E-arm) and 2nd order(in H-arm) Chebyshev matching networks, and with two symmetrical Schottkey Barrier Diodes.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.104-108
• /
• 2017

Induction motors have wide applicability in many fields, both in industrial sectors and households, for their advantages of a high efficiency and robust structure. The introduction of power-source-containing harmonics into the induction motor winding lowers its efficiency and increases its temperature, greatly affecting its operation characteristics. In this study, we performed an electromagnetic field analysis using the time-difference finite-element method with the purpose of analyzing the steady-state current characteristics of an induction motor. Additionally, we calculated the steady-state current with a method combining an electromagnetic field equation and a circuit equation. In the electromagnetic field analysis, the nonlinearity was taken into account using the Newton-Raphson method, and a backward time-difference method was employed for the time derivative term. Then, we compared the steady-state current of the induction motor obtained by calculation with the experimentally measured values, thus validating the proposed algorithm. Furthermore, we analyzed the impacts of the shape and material of the rotor conductor bar of the induction motor on the steady-state current of the main winding.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.125-135
• /
• 2001

A 8$\times$4 microstrip antenna array is designed at 5.3 GHz and its characteristics are investigated with respect to the application in dual polarized synthetic aperture radars. The design is focused on the achievement of a wide bandwidth, a high polarization purity, a low loss, a good isolation and some mechanical requirements suitable for the application. The antenna is fed by a -3 dB tapered feed network, and is composed of dual polarized SSFIP (Strip-Slot-Foam-Inverted Patch) elements with honeycomb and shielding plane. Simulation results for the antenna array are presented and compared with measurements. It is observed that the antenna shows a bandwidth of 80 MHz, a polarization isolation better than 20 dB, an isolation of 40 dB, and good mechanical characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.8-15
• /
• 1998

In this paper, to improve the bandwidth of microstrip antenna, we discussed parasitic patch structure coupled capacitively at radiating slot. To reduce the overal size of antenna,$\lambda$/4 short structure is accepted instead of $\lambda$/2 patch. Since ground plane is reduced, backward radiation is occurred. The characteristics of the designed antenna is evaluated, based on the transmission line model and the aperture analysis method. And by computer program the radiation pattern and return loss are evaluated. As simulation results, backward radiation is -15 dB. Bandwidth of constructed antenna is 167 MHz at the resonant frequency of 2.45 GHz, which is very broad, compared to conventional microstrip antennas. Therefore the proposed antenna will be suitable for very wide bandwidth communications.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.108-116
• /
• 2018

In this paper, a method of designing a Vivaldi type phased array antenna (PAA) which operates at S-band (2.8-3.3 GHz) is presented. The presented antenna uses broadside coupled split ring resonators (BC-SRRs) for high isolation, wide field of view, and good active S-parameter characteristics. As an example, we design a $1{\times}8$ array antenna with various BC-SRR structures using theory and EM simulations. The antenna is fabricated and measured to verify the design. With the BC-SRR implemented between the two radiating elements, the isolation is shown to be enhanced by 6 dB, up to 23 dB. The scan angle is shown to be within ${\pm}53^{\circ}$ based on a -10 dB active reflection coefficient. The operation of the scan angle is possible within ${\pm}60^{\circ}$ with a little larger reflection coefficient (-7 dB to -8 dB). The proposed design with BC-SRRs is expected to be useful for PAA applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.909-916
• /
• 2008

In this paper, we propose and analyze M-ary pulse order time hopping multiple access ultra wideband (PO-THMA UWB) system using modified Hermite polynomial (MHP). The MHP pulses have a mutually orthogonal property between different ordered pulses and that property makes simultaneous transmission at the same time slot regardless of collision in the THMA-UWB system. Therefore, we derive the cross-correlation furlction of MHP pulses and analyze the BER of the proposed system and show that the BER performance and the transmission capacity are improved dramatically when compared with those of conventional THMA-UWB system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.645-649
• /
• 2007

Partial discharge(PD) test for simulated insulation defects of used hydro generator stator winding was conducted to analyze the PD Parameters. Simulated insulation defects are classified by 5 types corona, slot, internal, multi and aging defect. Phase resolved partial discharge, statistical parameter (skewness, kurtosis), PD magnitude as a function of the test voltage(Q-V curve) and PD magnitude change under test voltage for 2 minutes are used as PD parameters. The analysis of PD parameters by 4 types are proved to be useful methods. In particular, PD parameter characteristics of aging defect could help to assess the aging condition of stator winding because aging defect has more weak insulation strength than other insulation defects : PD distribution is wide and flat, PD rises rapidly near $0^{\circ}\;and\;180^{\circ}$ and Q-V curve rises sharply and then gently drops.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.2
• /
• pp.23-36
• /
• 2005

The main obstacle hindering the wide deployment of identity-based cryptosystem is that the entity responsible for creating the private key has too much power. As a result, private keys are no longer private. One obvious solution to this problem is to apply the threshold technique. However, this increases the authentication computation, and communication cost during the key issuing phase. In this paper, we propose a new effi ient model for issuing multiple private keys in identity-based encryption schemes based on the Weil pairing that also alleviates the key escrow problem. In our system, the private key of a user is divided into two components, KGK (Key Description Key) and KUD(Key Usage Desscriptor), which are issued separately by different parties. The KGK is issued in a threshold manner by KIC (Key Issuing Center), whereas the KW is issued by a single authority called KUM (Key Usage Manager). Changing KW results in a different private key. As a result, a user can efficiently obtain a new private key by interacting with KUM. We can also adapt Gentry's time-slot based private key revocation approach to our scheme more efficiently than others. We also show the security of the system and its efficiency by analyzing the existing systems.