• 한국재료학회지
• /
• 제20권12호
• /
• pp.676-680
• /
• 2010

Most TCOs such as ITO, AZO(Al-doped ZnO), FTO(F-doped $SnO_2$) etc., which have been widely used in LCD, touch panel, solar cell, and organic LEDs etc. as transparent electrode material reveal n-type conductivity. But in order to realize transparent circuit, transparent p-n junction, and introduction of transparent p-type materials are prerequisite. Additional prerequisite condition is optical transparency in visible spectral region. Oxide based materials usually have a wide optical bandgap more than ~3.0 eV. In this study, single-phase transparent semiconductor of $SrCu_2O_2$, which shows p-type conductivity, have been synthesized by 2-step solid state reaction at $950^{\circ}C$ under $N_2$ atmosphere, and single-phase $SrCu_2O_2$ thin films of p-type TCOs have been deposited by RF magnetron sputtering on alkali-free glass substrate from single-phase target at $500^{\circ}C$, 1% $H_2$/(Ar + $H_2$) atmosphere. 3% $H_2$/(Ar + $H_2$) resulted in formation of second phases. Hall measurements confirmed the p-type nature of the fabricated $SrCu_2O_2$ thin films. The electrical conductivity, mobility of carrier and carrier density $5.27{\times}10^{-2}S/cm$, $2.2cm^2$/Vs, $1.53{\times}10^{17}/cm^3$ a room temperature, respectively. Transmittance and optical band-gap of the $SrCu_2O_2$ thin films revealed 62% at 550 nm and 3.28 eV. The electrical and optical properties of the obtained $SrCu_2O_2$ thin films deposited by RF magnetron sputtering were compared with those deposited by PLD and e-beam.

• Journal of Microbiology and Biotechnology
• /
• 제19권11호
• /
• pp.1295-1300
• /
• 2009

A 2,172-bp full-length gene (aga-F78), encoding a protease-resistant $\alpha$-galactosidase, was cloned from Rhizopus sp. F78 and expressed in Escherichia coli. The deduced amino acid sequence shared highest identity (45.0%) with an $\alpha$-galactosidase of glycoside hydrolase family 36 from Absidia corymbifera. After one-step purification with a Ni-NTA chelating column, the recombinant Aga-F78 migrated as a single band of ~82 and ~210 kDa on SDS-PAGE and nondenaturing gradient PAGE, respectively, indicating that the native structure of the recombinant Aga-F78 was a trimer. Exhibiting the similar properties as the authentic protein, purified recombinant Aga-F78 was optimally active at $50^{\circ}C$ and pH 4.8, highly pH stable over the pH range 5.0-10.0, more resistant to some cations and proteases, and had wide substrate specificity (pNPG, melidiose, raffinose, and stachyose). The recombinant enzyme also showed good hydrolytic ability to soybean meal, releasing galactose of $415.58\;{\mu}g/g$ soybean meal. When combined with trypsin, the enzyme retained over 90% degradability to soybean meal. These favorable properties make Aga-F78 a potential candidate for applications in the food and feed industries.

• 비파괴검사학회지
• /
• 제26권2호
• /
• pp.84-89
• /
• 2006

레이저 초음파 검사 장치는 레이저빔을 이용하여 초음파 신호를 발생시키고 측정하는 비접촉식 결함 검사 장치이다. 이 장치는 펄스 레이저빔을 이용하여 광대역 주파수 범위를 갖는 초음파 신호를 발생시키고 작은 점으로 집속된 측정용 레이저빔을 이용하여 초음파 신호를 측정하므로 우수한 측정 분해능을 제공한다. 본 논문에서는 레이저 초음파의 표면파를 이용하여 표면 결함의 깊이를 측정하는 기법에 대한 연구를 수행하였다. 표면 결함은 깊이가 깊어질수록 차단 주파수 값이 작아지는 저주파 통과 필터 역할을 한다. 그리고 결함을 통과한 초음파 신호의 중심 주파수 값은 결함의 깊이에 따라 반비례적으로 작아진다. 본 논문에서는 표면 결함의 정규화 된 전달함수를 구한 다음 주파수 감쇠 성분을 이용하여 표면 결함의 깊이 정보를 추출하였고 표면 결함을 통과한 레이저 초음파 신호의 중심 주파수 값을 이용하여 결함의 릴이 정보를 추출하였다. 제안된 표면 결함 깊이 측정 방법은 초음파의 진폭 변화에 의한 결함 깊이 측정법보다 더욱 정밀한 정보를 제공하였다.

• Applied Biological Chemistry
• /
• 제44권4호
• /
• pp.219-223
• /
• 2001

Hemoglobin(Hgb)의 효소 가수분해액으로부터 고농도 heme-iron의 분리에 영향을 주는 기질의 농도, 가수분해도 (DH, degree of hydrolysis) 및 분리 pH의 효과 등을 조사하였으며, pilot scale에서 고농도 heme-iron을 생산하였다. 최적 반응조건(pH 10.0, $50^{\circ}C$, 5 hr)에서의 Esperase에 의한 Hgb의 DH는 $24{\sim}25%$였다. Hgb의 농도는 heme-iron의 분리에 영향을 미쳐서 Hgb의 농도가 2.5%, 5.0%, 10.0%로 증가할수록 heme-iron/peptide(heme-iron의 분리도)는 각각 47.4%, 35.6%, 21.8%로 감소하였으며, 이에 따라 농축율도 감소하였다. Hgb의 가수분해액으로부터 고농도 heme-iron의 분리에 효율적인 pH 영역은 DH에 따라 달라졌으며, DH가 6.3%의 경우는 pH $5.0{\sim}6$에서 heme-iron/peptide의 비가 8.92%, DH가 14.5%인 경우는 pH $4.0{\sim}6.0$에서 $12.1{\sim}19.5%$였으며, DH가 24.3%인 경우는 pH $3.0{\sim}5.0$에서 $34.7{\sim}36.4%$로 가수분해도가 높을수록 고농도 heme-iron의 분리시 최적 PH 범위가 산성 영역으로 이동되었으며, 이 영역의 pH에서 peptide의 용해도 증가로 분리도가 증가되었다. 가수분해액으로부터 분리된 heme-iron의 분자량은 약 1 kDa정도로 hematin과 유사한 분리패턴을 보였다. Pilot scale로 제조한 고농도 heme-iron 제품에서의 heme-iron 함량은 27.1%, heme-iron/peptide 비는 38.7%, 생산수율은 9.3%이었다.

• 수산해양교육연구
• /
• 제11권2호
• /
• pp.203-215
• /
• 1999

Floating debris was recorded from a training ship, Kaya, of Pukyong National University with about 12 knots speed at July 19~21, 1999 and July 24~26. The sampled area is the Yellow Sea (YS) connected from Cheju Is. of Korea to Qindao harbor of China, divided into 88 unit segments on survey routes. Debris fabrication materials were categorized with 6 items using the following; man-made or natural wood items, paper and cardboard, nylon netting and rope, styrofoams, vinyl and plastics, floating metal and glass containers. All identified items within a $120{\pm}20m$ wide band were recorded but ignored if beyond this boundary. The results of distribution of floating debris in the area are as follows: 1. The greatest quantities of marine debris discovered during the survey were $184pieces\;per\;km^2$ near Qindao harbor. The next polluted areas, Sohuksan islands, positioned in the eastern part of YS were scattered in about $40pieces/km^2$ or so. 2. Among items, woods, paper and cardboard, vinyl and plastics were found out near Qindao Coast of China. On the other hand, there were many styrofoams, nylon netting and rope near the area of Sohuksan islands in the eastern part of YS. 3. The distribution densities of western part of YS near Qindao are varied with largely range in items and quantities but those of the eastern part, near Sohuksan islands were nearly constant. 4. Styrofoams were composed of 63% among all debris in YS, next paper and cardboard 15%, and wood item, vinyl and plastics each 10%. Therefore, marine debris of YS is revealed that distribution characteristics and composition are very different in each area. These phenomena are concluded that they largely depend on the life styles in land and the utilities of the sea. And of items, styrofoams is dominated by the distribution pattern of YS. Furthermore, surveys are continuously being investigated, and from this it is hoped that a much wider coverage can be achieved, perhaps all sites of the YS and contributed to the finding sources, the stationary area and removal method of debris joined the flow patterns.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.17-18
• /
• 2011

Plasma in liquid phase has attracted great attention in the last few years by the wide domain of applications in material processing, decomposition of organic and inorganic chemical compounds and sterilization of water. The plasma in liquid is characterized by three main regions which interact each - other during the plasma operation: the liquid phase, which supply the plasma gas phase with various chemical compounds and ions, the plasma in the gas phase at atmospheric pressure and the interface between these two regions. The most complex region, but extremely interesting from the fundamental, chemical and physical processes which occur here, is the boundary between the liquid phase and the plasma gas phase. In our laboratory, plasma in liquid which behaves as a glow discharge type, is generated by using a bipolar pulsed power supply, with variable pulse width, in the range of 0.5~10 ${\mu}s$ and 10 to 30 kHz repetition rate. Plasma in water and other different solutions was characterized by electrical and optical measurements. Strong emissions of OH and H radicals dominate the optical spectra. Generally water with 500 ${\mu}S/cm$ conductivity has a breakdown voltage around 2 kV, depending on the pulse width and the repetition rate of the power supply. The characteristics of the plasma initiated in ultrapure water between pairs of different materials used for electrodes (W and Ta) were investigated by the time-resolved optical emission and the broad-band absorption spectroscopy. The deexcitation processes of the reactive species formed in the water plasma depend on the electrode material, but have been independent on the polarity of the applied voltage pulses. Recently, Coherent anti-Stokes Raman Spectroscopy method was employed to investigate the chemistry in the liquid phase and at the interface between the gas and the liquid phases of the solution plasma system. The use of the solution plasma allows rapid fabrication of the metal nanoparticles without being necessary the addition of different reducing agents, because plasma in the liquid phase provides a reaction field with a highly excited energy radicals. We successfully synthesized gold nanoparticles using a glow discharge in aqueous solution. Nanoparticles with an average size of less than 10 nm were obtained using chlorauric acid solutions as the metal source. Carbon/Pt hybrid nanostructures have been obtained by treating carbon balls, synthesized in a CVD chamber, with hexachloro- platinum acid in a solution plasma system. The solution plasma was successfully used to remove the template remained after the mesoporous silica synthesis. Surface functionalization of the carbon structures and the silica surface with different chemical groups and nanoparticles, was also performed by processing these materials in the liquid plasma.

• 한국지역지리학회지
• /
• 제2권2호
• /
• pp.183-196
• /
• 1996

지도의 형태는 전통적으로 항공사진이나 위성사진을 이용한 수작업에 의해 추출되어 왔으나, 최근의 원격탐사 기술의 발달은 지도의 형태추출에 새로운 혁신을 가져다 주었다. 공간필터기법을 이용하면 지도형태 추출의 자동화가 가능한데, 특히 선의 추출을 고빈도필터를 이용하여 가능하다. 본 연구에서는 먼저 필터와 지도화의 관계에 대해 이론적으로 고찰한 다음 지도의 선형화와 관련하여 유용하다고 알려진 필터들을 소개하였다. 그리고 이 필터들을 진주시의 SPOT Panchromatic 영상에 적용하였다. 적용한 결과 본고에서 소개한 필터적용 영상이 전반적으로 초기영상보다 개선되어 선형화작업에 매우 유용함을 확인하였다. 특히 초기영상이 포함된 필터영상들의 해석이 용이하였고 선형화가 명확하였다. 그러나 문헌에서 유용성이 인정된 필터라도 일부 필터는 진주시의 경우 선형화작업이 전혀 불가능하였다.

• 자원환경지질
• /
• 제30권4호
• /
• pp.279-289
• /
• 1997

Dark to pale green-colored, Cr-bearing sericites from hydrothermal alteration zone of the Narim gold deposit were investigated mineralogically and geochemically. The alteration zone is composed mineralogically of quartz, carbonate minerals and green sericite with minor amounts of chlorite, barite and sulfide minerals (pyrite, sphalerite, galena). The zone is enriched in As (967 to 1520 ppm), Cu (31 to 289 ppm), Ni (1027 to 1205 ppm), Pb (0.20 to 1.24 wt.%) and Zn (1.03 to 1.07 wt. %) compared with fresh rocks such as granitic gneiss, porphyritic biotite granite and basic dyke. The Cr, probably the chromophore element, is highly enriched in the alteration zone (1140 to 1500 ppm), host granitic gneiss (1200 ppm) and porphyritic biotite granite (1200 ppm). Occurrence and grain size of sericite are diverse, but most of the Cr-bearing sericites (150 to $200{\mu}m$ long and 20 to $30{\mu}m$ wide) occur along the boundaries between ore veins and host rocks (especially basic dyke and granitic gneiss). X-ray diffraction data of the sericite show its monoclinic form with unit-cell parameters of $a=5.202{\AA}$, $b=8.994{\AA}$, $c=20.103{\AA}$, ${\beta}=95.746^{\circ}$ and $V=935.83{\AA}^3$, which are similar with the normal 2M1-type muscovite. Representative chemical formula of the sericite is ($K_{1.54}Ca_{0.03}Na_{0.01}$)($Al_{3.42}Mg_{0.38}Cr_{0.14}Fe_{0.06}V_{0.02}$)($Si_{6.69}Al_{1.31}$)$O_{20}(OH)_4$. The Cr content increases with decrease of the octahedral Al content, and ranges from 0.36 to 2.58 wt.%. DTA and TG curves of the sericite show endothermic peaks at $342^{\circ}$ to $510^{\circ}$, $716^{\circ}$ to $853^{\circ}$ and $1021^{\circ}C$, which are due to the expulsion of hydroxyl group. The total weight loss by heating is measured to be about 8.8 wt. %, especially at $730^{\circ}C$. Infrared absorption experiments of the sericite show broad absorption band due to the O-H bond stretching vibration near the $3625cm^{-1}$, coupled with the 825 and $750cm^{-1}$ doublet. The vibration bands related with the H-O-Al and Si-O-Al bonds occur at $1030cm^{-1}$ and 500 to $700cm^{-1}$, respectively. Based on paragonite content of the sericite, the formation temperature of the Narim gold deposit is calculated to be $220{\pm}10^{\circ}C$.

• 생명과학회지
• /
• 제16권6호
• /
• pp.1001-1005
• /
• 2006

SSR markers를 이용하여 벼의 품종간 유전적 유연관계 분석과 품종식별 방법에 대한 연구를 수행하여 얻어진 결과를 요약하면 다음과 같다. SSR primer 50개와 벼 보급종 21품종을 PCR 반응시킨 결과 다형성을 뚜렷하게 나타내는 primer는 23개였으며, 각 marker에 의해 발생된 대립유전자의 수는 $2{\sim}9$까지 검출되었고, 평균값은 3.00개로 나타났다. 유전적 다형성 정도를 나타내어 주는 SSR marker의 PIC 값은 최소 0.091에서부터 최대 0.839까지 다양하게 분석되었다. SSR marker를 이용하여 분석된 벼 21품종에 대한 전체 유전적 유사도는 $0.59{\sim}0.92$의 범위에 속하였고 유사도 지수 0.65를 기준으로 할 때 4개의 그룹으로 구분되었다. SSR marker중에서 RM206, RM225, RM418, RM478은 marker genotype에 의해 21 품종에 대해 각각 고유한 밴드 특성을 나타내어 품종판별이 가능한 것으로 나타났다. 금후 이 연구결과는 벼 보급종의 품종식별을 위해 효과적으로 이용될 수 있는 것으로 나타났다.

• 한국식품과학회지
• /
• 제34권2호
• /
• pp.311-318
• /
• 2002

Lactobacillus plantarum에 대해 항균활성을 지니는 유산균을 김치로부터 분리하였다. 이 균은 Leuconostoc mesenteroides으로 동정되었으며 Leuconostoc mesenteroides B7으로 명명하였다. Leuconostoc mesenteroides B7이 생산하는 박테리오신은(박테리오신 B7) pH 및 열 안정성이 뛰어나 pH $2.5{\sim}9.5$ 그리고 $4^{\circ}C{\sim}120^{\circ}C$ 열처리에서도 항균활성을 안정하게 유지하였다. 박테리오신 B7은 proteinase K, trypsin, ${\alpha}-chymotrypsin$, 그리고 protease 처리에 의해 항균활성이 실활되므로 peptide나 단백질로 이루진 구조임을 알 수 있었다. 정제된 박테리오신 B7은 Tricine-SDS-PAGE를 통하여 분자량이 약 3,500 dalton임을 확인하였다. Leuconostoc mesenteroides B7과 이에 감수성인 균주, Lb. plantarum KFRI 464 혹은 Lb. delbruekii KFRI 347와의 혼합배양에 의하여 박테리오신 B7 생산이 증가됨을 확인하였고, 이는 박테리오신 생산 유도물질이(inducing factor) 감수성균주내에 존재함을 시사한다. 감수성균주의 세포분획을 통하여 inducing factor는 감수성균주의 세포벽과 세포내에 존재함을 알았다. 이 inducing factor가 proteinase K처리로 박테리오신 유도활성을 상실함으로써 이는 단백질성물질임을 시사하였다.