• Journal of Korea Multimedia Society
• /
• v.19 no.10
• /
• pp.1808-1815
• /
• 2016

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol, has been already developed to provide time synchronization among nodes in wireless sensor networks. Even though the TPSN's method has been referenced by so many other time synchronization schemes for resource-constrained networks like wireless sensor networks or low power personal area networks, it has some inefficiency in terms of power consumption and network-wide synchronization time (or called convergence time). The main reason is that each node in TPSN needs waiting delay to solve the collision problem due to simultaneous transmission among competing nodes, which causes more power consumption and longer network convergence time for a network-wide synchronization. In this paper an improved scheme is proposed by changing message exchange method among nodes. The proposed scheme not only shortens network-wide synchronization time, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.295-300
• /
• 2014

The frequency is an important operating parameter of a power system. There is an increasing importance of constant monitoring of frequency to achieve stable power supply by WAMS(wide area monitoring system) and FNET(Frequency Monitoring Network). This paper is part of development of a network-based frequency monitoring and failure prediction system for wide-area intelligent protection relaying. In this paper, analysis of propagation speed of power frequency by generation drop using the PSS/E was carried out. For dynamic analysis, the 11 metropolitan areas offices of KEPCO divided into five groups of Seoul, Gangwon, Chungcheong, Honam, and Yeongnam group, study was performed.

• International Journal of Computer Science & Network Security
• /
• v.23 no.3
• /
• pp.130-138
• /
• 2023

The Smart grids are considered as multi-disciplinary power systems where the communication networks are highly employed. This paper presents optimal wide area measurement system (WAMS) configuration in Nordic power system. The transition from SCADA to WAMS becomes now trend in all power systems to ensure higher reliability and data visibility. The optimization applied in this research considered the geographical regions of the Nordic power system. The research considered all the devices of WAMS namely phasor measurement units (PMUs), phasor data concentrators (PDCs) and communication links. The study also presents two scenarios for optimal WAMS namely base case and N-1 contingency as different operating conditions. The result of this research presents technical and financial results for WAMS configuration in a real power system. The optimization results are performed using MATLAB 2017a software application.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.109-115
• /
• 2019

Currently, LPWA(Low Power Wide Area) communication technology is widely used due to the development of IoT(Internet of Things) technology. Among the LPWA technologies, LoRaWAN(Long Range Wide Area Network) is widely used in many fields due to its wide coverage, stable communication speed, and low-cost modem module prices. In particular, LoRa(Long Range) can easily construct LoRaWAN with a dedicated gateway. So many organizations are building their own LoRaWAN-based networks. The LoRaWAN Gateway receives the LoRa packet transmitted from an End-device installed in the adjacent location, converts it into the Internet protocol, and sends the packet to the final destination server. Current LoRa Gateway uses a single-hop method, and each gateway must include a communication network capable of the Internet. If it is the mobile communication(i.e., WCDMA, LTE, etc.) network, it is required to pay the internet usage fee which is installed in each gateway. If the LoRa communication is frequent, the user has to spend a lot of money. We propose an idea on how to design a multi-hop protocol which enables packet routing between gateways by analyzing the LoRaWAN communication method implemented in its existing single-hop way in this paper. For this purpose, this paper provides an analysis of the standard specification of LoRaWAN and explains what was considered when such protocol was designed. In this paper, two gateways have been placed based on the functional role so as to make the multi-hop protocol realized: (i) hopping gateway which receives packets from the end-device and forwards them to another gateway; and (ii) main gateway which finally transmits packets forwarded from the hopping gateway to the server via internet. Moreover, taking into account that LoRaWAN is wireless mobile communication, a level-based routing method is also included. If the protocol proposed by this paper is applied to the LoRaWAN network, the monthly internet fee incurred for the gateway will be reduced and the reliability of data transmission will be increased.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.4
• /
• pp.1-11
• /
• 1997

In this paper, modeling of the communication channel occupancy characteristics at the base station in the wide area radio trunking syste has been performed. Using the results, mathematical analysis for the switching capacity at the network switch has also been done. Specificatlly, we propose a G/M/m queueing model for the single service area modeling, and analyze changes in call blockingprobabilities accoridng to changes in the burstness characteristics of group paging calls. As a result, we have observe dthat the channel occupancy variations become larger as the burstness characteristics become more apparent, to make the call blocking probability higher. Next, based on the single service area analysis, we have anayzed mathematically the average switching capacity required to serve mobile subscribers for a wide area radio trunking sytem, where multiple switching port assignments are required when the people in the same group are distributed over several base stations. Accordingly, we have observed that the average and the variance of switching channel occupancy are closely related to the mobility characteristics of subscribers, and that we need a netowrk switch having bigger capacity as subscribers show wider distribution. Especially, with the call dropping probability within 0.2%, a switch having about 5 to 6 times bigger can be required, compared with the one when the mobility of subscribers is mostly restricte dto a single service area.

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.187-187
• /
• 2007

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06b
• /
• pp.1-6
• /
• 1996

To promote academic researches on earth environment utilizing satellite data, research infrastructure such as satellite data reception processing, distribution and archival systems should be fully provided. The means to enhance the infrastructure were discussed by a working group and“Satellite Data Center via Network”has been proposed. This concept has three principles; (1) To realize necessary functions by organizing experts distributed all over Japan and connecting them by network, (2) To realize“Satellite Data Center via Network”for GMS and NOAA Satellites, which are widely used for research, and (3) Satellite data set oriented to specific research area should be generated by researchers having definite research purposes of sensor algorithms and hugh volume data processing. Utilization of the Science Information Network (SINET) has been discussed to realize this concept, and to accelerate this project an experiment“Network Utilization for Wide Area Use of Satellite Image Data”under“Cooperative Experiment on Multimedia Communication”has been introduced. And the roles of the Institute of Industrial Science, University of Tokyo to contribute this project has been described.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.651-658
• /
• 2007

A new tree-structured neural network classifier is proposed for the automatic real-time inspection of cold-rolled steel strip surface defects. The defects are classified into 3 groups such as area type, disk type, area & line type in the first stage of the tree-structured neural network. The defects are classified in more detail into 11 major defect types which are considered as serious defects in the second stage of neural network. The tree-structured neural network classifier consists of 4 different neural networks and optimum features are selected for each neural network classifier by using SFFS algorithm and correlation test. The developed classifier demonstrates very plausible result which is compatible with commercial products having high world-wide market shares.

• The KIPS Transactions:PartC
• /
• v.17C no.2
• /
• pp.215-222
• /
• 2010

IEEE 802.15 WPAN(Wireless personal area network) technologies represented by Bluetooth are prevalent these days. However, they have short radio coverage and thus cannot be used to build a SNS for servicing users spread over a wide area. In this paper, we develop a mobile SNS(Social Network System) that does not necessitate any infrastructure support using the Bluetooth technology and the mobility based information dissemination technique. Using so-called mobility assisted data dissemination technique we overcome the short radio range restriction of WPAN technologies. We develop Blue Market, a free online marketplace program, as a proof of concept.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.133-138
• /
• 2009

In this paper, we propose a ZCD (Zero Correlation Duration) code based Ultra Wide Band(UWB) MODEM(modulation and demodulation) technique for WBAN as a hunman body wireless communication operating in WBAN (Wireless Body Area Network) environment. We certified ZCD code based UWB schemes are available for hunman body wireless communications by various simulation and performance analysis using WBAN transmission channels. Furthermore, we suggested some possibility of RFIC implementation related to human body based UWB communication module by presenting some related examples.