• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.735-735
• /
• 2006

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.387-393
• /
• 2008

In this paper, we present an SDR (Software Defined Radio) handset modem platform which supports communication systems such as HSDPA (High Speed Downlink Packet Access), and WiBro (Wireless Broadband Portable Internet). The proposed SDR platform employs DSPs (Digital Signal Processors), FPGAs (Field Programmable Gate Arrays), and microprocessors in such a way that the various communication functions like HSDPA and WiBro can be programmed and downloaded to the hardware platform. The proposed SDR platform can be used for functional verification of the physical layers of the mobile handset system in the mobile communication network. We first demonstrate the receiving structure of the physical layer of the HSDPA and WiBro system. Then, the hardware implementation of the proposed SDR platform is shown with functions and optimized signal flows required at each mode. Finally, the link performance of each mode operating on the proposed SDR platform is presented through the internal loopback tests with the test vectors. The experimental performance has been compared with the computer simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.515-522
• /
• 2008

In this paper, a slot antenna with built-in Bazooka balun aimed for a WiBro repeater was designed and fabricated. The return loss and radiation pattern of the slot antenna were improved due to the introduced Bazooka balun. This balun brings about even radiation pattern and keeps the stabilized coverage of repeater And it is easy to unite this balun with the antenna body by providing the terminal of Bazooka balun with screw shape. H-type slot was used to reduce the size of the antenna, and the slot antenna was fabricated in the structural symmetry with respect to a feeding point to afford the omni-directional radiation pattern. The simulated results were obtained by MWS(Microwave Studio Simulator) of CST company, and the measurement on the proposed antenna was conducted in an anechoic chamber equipped with a network analyzer and a far field measurement system. The measured peak gain shows 5.75 dBi and the average gain is above -0.8 dBi. The return loss remains below -12.35 dB for all frequency bands in WiBro regarded as a good performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.190-197
• /
• 2010

The ACR (Access Control Router) of WiBro processes location registration of the Correspondent Node and Home Agent as the Correspondent Node moves between ACRs. Therefore, the location update cost is low compared with MIPv6. However, all packets which are sent and received are sent through the ACR, so as the number of mobile nodes that are managed by the ACR increases, the cost of packet delivery also increases. Therefore, the communication state of the ACR domain remains smooth when the ACR which manages the mobile node in the ACR domain has good performance. However, network delays occur unless the ACR performs well, so the role of the ACR is important. In this paper, we analysis performance of the ACR for efficient realization of the WiBro standard. By using the Deny Probability and the Total Profit of ACR performance and apply it to the Random Walk Mobility model as the mobility model.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1113-1114
• /
• 2008

WiBro(Wireless Broadband) is the standard of high-speed portable internet based on OFDMA/TDD (orthogonal frequency division multiple access / time division duplexing) techniques, and the subset of consolidated version of IEEE802.16e Wireless MAN standard. In this paper, we propose the design method of WiBro system. Proposed method used KSFM neural network blind equalization with Bussgang algorithms.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.375-383
• /
• 2012

Together with the GPS-based approach, geolocation through mobile communication networks is a key technology for location-based service. Since the Mobile WiMAX system is considered as a candidate for fourth-generation mobile systems, it is important to investigate its location capability. The geolocation of Mobile WiMAX can be realized when the preamble symbols in the down-link channel are appropriately used for a TDOA (Time-Difference-of-Arrival) approach. However, the cellular structure of Mobile WiMAX inevitably generates co-channel interference, and it is difficult for the mobile terminal to acquire distance measurements from multiple base stations. Therefore, for geolocation via multilateration using the Mobile WiMAX network, it is very important to increase hearability. This paper proposes a geolocation method for Mobile WiMAX which employs interference cancellation and preamble signal overlapping for the enhancement of hearability. A novel interference cancellation strategy for complex-valued Mobile WiMAX signals is presented which has an iterative structure. Simulation results show that the proposed geolocation method provides the user's position with an accuracy of less than 20 m through the Mobile WiMAX cellular network if there is no multi-path or NLOS (None-Line-of-Sight).

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.177-184
• /
• 2006

A handover is a technology that enables data transmission and receipt seamlessly while a mobile station moves from the current base station to another base station. The handover is basically classified into two types; a horizontal handover which changes a radio link only without changing a network link, and a vertical handover which changes both in heterogeneous networks. In this paper, we propose a vertical handover protocol in a dual base station which supports both of W-CDMA and WiBro networks based on SDR (Software Defined Radio), verify the rightness using a state transition diagram and a Petri-net, and evaluate the performance of the proposed protocol using NS-2 simulator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.17-26
• /
• 2010

This is concerned with the technology to monitor the vehicle operation, failure and disorder by using WiBro portable device. More precisely, the technology makes it possible that the information collection device is connected to both ECU(Electronic Control Unit) which is the device for controlling engine, transmission, brake, air-bag, etc that are connected to in-vehicle network and OBD-II connector that is for data collection from various sensors. In addition, with a WiBro portable device (cell phone, PDA, PMP, UMPC, etc). equipped with a vehicle diagnostic programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and alarm is alerted when the vehicle is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiBro network to the server managed by the company specialized in managing the vehicles, thus the technology could help the drivers who have less knowledge about their auto-vehicles have safe and economic driving. There is always a possibility of malfunction due to various types of noise that are caused by wring-harness when the device is wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from vehicle and a personal WiBro device. Also, we performed research on data acquisition and interlock for the system defined by the definition for information and data sharing platform.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.789-792
• /
• 2009

Providing emergency services in WiBro networks is very important. This paper briefly introduces the emergency services, and explains the emergency service supporing framework which the WMF have proposed. And then several research conducted on location determination in WiBro networks are examined to explore the state-of-the-art in this field. Lastly, the status, on this matter, of current WiBro networks in service is mentioned, and we outlooks the remaining works.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.823-829
• /
• 2011

This paper covers the service quality of packet-based voice service that is provided over a wireless broadband (WiBro) network. Using a measurement software that has been developed in the course of preparing a advanced service quality management scheme for the packet-based voice service over a wireless network[2][3], a huge scale of experiment is conducted to measure the real quality of the voice service. Based on our analysis of the measurement result, the service quality of the voice service is supposed to be quite good over WiBro networks. In addition, another experiment to investigate the effect of degradation of wireless transmission conditions on the service quality of the voice service shows the values of wireless service metris in which mean opinion score (MOS) starts to decrease.