• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.635-642
• /
• 2012

In this paper, a real-time control system with Wi-Fi wireless communication was developed for dentistry Integrated Device. The control system is developed based on the Android platform using S3C6410 ARM core that is equipped with Wi-Fi communication, RS-485, Linux 2.6 and Android 2.0. The control system controls a water purifier, compressor and suction in real-time. The experimental results that the control system was controlled by each control modules connected with a water purifier, compressor and suction. The status values are displayed in real-time using RS485.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1027-1032
• /
• 2012

Importance of security is emphasized along with development of local area network such as NFC, Bluetooth, WiFi etc., but research that is worth watching eagerly up to now is not gone. This paper proposed SSEN algorithm for security elevation of approximation communication network. Proposed SSEN algorithm is algorithm that special cryptographic function creates own key without necessity. Also, SSEN achieving certification function additionally, did so that can have more than performance about the processing speed and mistake of service voluntarily.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.3
• /
• pp.794-814
• /
• 2012

We propose a novel method for improving Wi-Fi positioning accuracy while reducing the energy consumption of mobile devices. Our method presents three contributions. First, we jointly and intelligently select the optimal subset of access points for positioning via maximum mutual information criterion. Second, we further propose local discriminant embedding algorithm for nonlinear discriminative feature extraction, a process that cannot be effectively handled by existing linear techniques. Third, to reduce complexity and make input signal space more compact, we incorporate clustering analysis to localize the positioning model. Experiments in realistic environments demonstrate that the proposed method can lower energy consumption while achieving higher accuracy compared with previous methods. The improvement can be attributed to the capability of our method to extract the most discriminative features for positioning as well as require smaller computation cost and shorter sensing time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.935-941
• /
• 2020

People estimation is important to provide IoT services. Most people counting technologies use camera or sensor data. However, the conventional technologies have the disadvantages of invasion of privacy and the need to install extra infrastructure. This paper proposes a method for estimating the number of people using a Wi-Fi AP. We use channel state information of Wi-Fi and analyze that using deep learning technology. It can be achieved by pre-installed Wi-Fi infrastructure that reduce cost for people estimation and privacy infringement. The proposed algorithm uses a k-binding data for pre-processing process and a 1D-CNN learning model. Two APs were installed to analyze the estimation results of six people. The result of the accurate number estimation was 64.8%, but the result of classifying the number of people into classes showed a high result of 84.5%. This algorithm is expected to be applicable to estimate the density of people in a small space.

• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.43-49
• /
• 2020

In spite of the notable advancements of millimeter wave communication technologies, the 60 GHz Wi-Fi is still not widespread yet, mainly due to the high limitation of coverage. Conventionally, it has been hardly possible to support a high data rate with fast beam adaptation while keeping atmospheric beamforming coverage. To solve these challenges in the 60 GHz communication system, holistic system designs are considered. we implemented an enhanced design LDPC decoder enabling 6.72 Gbps coded-throughput with minimal implementation loss, and our proposed phase-tracking algorithm guarantees 3.2 dB performance gain at 1 % PER in the case of 16 QAM modulation and LDPC code-rate 3/4.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.445-448
• /
• 2018

In this paper, we design microstrip antenna for GPS / WiFi for broadband mobile communication. The proposed antenna is designed to be used in the FR-4 (er = 4.3), the size is $40mm{\times}50mm$, and it can be used in the GPS frequency band of 1.6GHz and the WiFi frequency band of 5GHz. 2014, and the simulation result shows that the gain is 1.909dB at 1.6GHz and 4.607dB at 5GHz. The S-parameter also showed a result of less than -10dB (WSWR2: 1) in the desired frequency band. Recently, it is expected that GPS navigation system, which is widely used in smart phones and tablet PCs, can be easily and conveniently used by combining and applying GPS with WiFi.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.265-271
• /
• 2012

This paper proposes a communication distance performance evaluation method for mobility of service robots equipped with a Wi-Fi module. Service robots have function of mobile communication system according to classified services and utilize a (preferred) communication method, wireless lan(IEEE802.11 a/b/gin) communication method of ISM band(2.4GHz and 5.8GHz). For evaluating degradation performance of wireless data for the service robot's mobility. We measured and presented reference vectors obtained by utilizing a distance attenuation correlation method in the real world environment. To evaluate performance of the proposed method, path loss of reference vectors was assigned to the Azimuth 301W and then transmission rate and the transmit throughput of the test sample were measured by the Chariot. The proposed measurement method is necessary for securing wireless LAN communication distance for mobility of mobile smart device and service robots. In addition, if the proposed measurement method os adopted, It would be expected that mobile smart device vendors would utilize the method as an effective wireless LAN mobility communication distance performance evaluation method.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.156-161
• /
• 2012

An increasing number of people who use a smart phone or tablet PC are accessing wireless networks in public facilities including cafes and shopping centers. For example, iPhones and Android Phones have been available since 2010. However, security incidents may occur through all sorts of malicious code infection of users' personal information during the use of an insecure wireless network. In this paper, we will describe the Wi-Fi protected access (WPA) and WPA2 encryption systems used to access a wireless network from a smart phone and tablet PC, and demonstrate the access point (AP) hacking process in a wireless network to which a password is applied on the basis of the analyzed WPA and WPA2 passwords. We will analyze the method of successful AP hacking and propose an approach to enhancing wireless LAN security. This study will contribute to enhancing the security and stability of wireless networks.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.91-96
• /
• 2016

In this paper, we propose the CRM service model for analyzing and managing location based data collected by Wi-Fi and BLE. As mobile devices became personalized, enterprises became interested in individual location, and location based mobile marketing started to stand on spotlight. Location based proximity marketing is developing along with contactless data transmission technology, and payment system that uses NFC, Beacon that utilizes BLE, as well as advertisement via Wi-Fi are being serviced. We suggest the model that mobile devices can be detected and identified by MAC address with the need of being connected to Wi-FI or Bluetooth interface. MAC addresses are not associated with any specific user account or mobile phone number. The idea is to be able to measure the amount of people which are present in a certain point at a specific time, allowing the study of the evolution of data analysis and offers effective information for decision-makings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4341-4348
• /
• 2012

This paper presents a web-based real-time monitoring system for a photobioreactor using an WiFi wireless network. An WiFi interface can support high speed data transfer, up to 11Mbps and it can be compatible with commercial wireless LAN environment. Thus, the proposed cell culture based on WiFi network can be easily applied to the reconfigurable system and real-time monitoring system. In this paper, we integrate the commercial WiFi module to the various bio-sensors and sensor control board to configure the wireless network. After we evaluate application S/W for monitoring the environment within incubator, we verify the proposed sensor networks for a cell culture system and its monitoring system. This result can be applicable for various bio-applications that require the network configuration and real-time monitoring system.