• 한국표면공학회지
• /
• 제49권2호
• /
• pp.186-190
• /
• 2016

In this study, we fabricated the transparent photovoltaic device using 2-dimensional transition-metal dichalcogenides and investigated the transparency and photovoltaic characteristics. P-n heterojunction was formed by mechanical exfoliation and aligned transfer method on the transparent sheet using n-type $MoS_2$ and p-type $WSe_2$. Our transparent photovoltaic device exhibited the open-circuit voltage of ~ 0.15 V and the short-circuit current of 0.48 nA under illumination of white light.

• 한국수산과학회지
• /
• 제41권6호
• /
• pp.511-517
• /
• 2008

The radiation characteristics and economic efficiency of high - luminance light - emitting diodes (LEDs), a metal halide lamp, and a halogen lamp were studied to evaluate their potential as an energy-saving light source for fishing lamps. The wavelengths at which irradiance was maximum were 709, 613, 473, 501, 525, 465, 578, and 973 nm for red, orange, blue, peacock blue, green, and white LEDs, the metal halide lamp, and the halogen lamp, respectively. If the irradiance characteristics at 300-1,100 nm wavelengths are set as 100%, the irradiance rates at 381-780 nm were 99-78%, 82%, and 24% for the LEDs, metal halide lamp, and halogen lamp, respectively. The economic efficiency was superior in the order metal halide lamp, halogen lamp, peacock blue LED, and blue LED at 381-780 nm and metal halide lamp, peacock blue LED, blue LED, and halogen lamp at 480-520 nm. Based on the radiation characteristics and economic efficiency evaluated at 480-520 nm, the blue and peacock blue LED light sources can be used as energy-saving light sources for fishing lamps.

• 한국패류학회지
• /
• 제28권3호
• /
• pp.245-254
• /
• 2012

이 연구는 경남 통영시 도산면에서 진주조개 (Pinctada fucata) 를 1년간 양성한 시료에서 원주를 2005년 11월에 구입하여 전문가의 육안에 의해 품질.등급별로 White 컬러, Natural blue 컬러, Yellow gold 컬러로 구별하였다. 원주의 일반성분 특성은 저급의 원주일수록 Protein 함량이 높았다. 중금속의 경우, 모든 시료에서 Cr, Cu, Fe, K, Mn, Pb, Zn 등이 검출되었다. White계 원주에서 Cr, Mg, Zn, Mn 등이 낮은 등급에서 높았고, K, Fe 등은 높은 등급 원주에서 높은 경향을 확인 할 수 있었다. Zn의 경우 Natural blue와 Yellow gold 컬러에서는 높은 등급에서 함량이 높게 나타났다. 그리고 원주의 진주층 결정의 길이는 컬러에 상관없이 3-4 ${\mu}m$였고, 두께 범위는 0.28-0.34 ${\mu}m$이었다.

• 화훼연구
• /
• 제16권1호
• /
• pp.49-56
• /
• 2008

장미의 대표적인 화색인 적색 'Red Corvette', 분홍색 'Nobless'b, 황색 'Golden Metal' 및 백색 'Rose Yumi' 꽃을 재료로 건조방법에 따른 화색의 변화를 조사하고, 4주 및 8주간의 광처리(2,000lux, 16시간, 형광조명) 뒤의 화색 변화를 조사하였다. 모든 종류에서 실리카겔 매트로 압화 하는 처리구가 압화 당시와 광처리 후 화색변화가 가장 적었고, 전기압화기의 사용으로 꽃잎은 갈변화가 촉진되었다. 장미 적색은 한국산 시트지, 분홍색과 황색은 한국산 전기압화기, 장미 백색은 일본산 전기압화기 처리구가 화색의 변화가 가장 심하였다. 압화 당시 화색의 변화가 가장 컸던 것은 적색 장미였고, 그 다음이 분홍색, 황색, 백색 순이었다. 광처리에 의한 화색 변화정도가 가장 심했던 것은 황색 품종이었고, 다른 3종류는 다소 안정적이었다.

• 분석과학
• /
• 제30권2호
• /
• pp.75-81
• /
• 2017

5-methylthioninhydrin (5-MTN) is an amino acid sensitive reagent used for the development of latent fingermarks deposited on porous surfaces such as paper and wood. The present study demonstrates that the 5-MTN can be used as a latent footwear impression enhancement reagent, by reacting with trace multivalent metal ions, which are the main components of the latent footwear impression. 5-MTN and L-alanine complex (MTN-ALA) used for the latent footwear impression development was prepared, by mixing $4.5{\times}10^{-3}M$ 5-MTN (in methanol) and $4.5{\times}10^{-3}M$ L-alanine (in methanol) in 1:1 ratio, and keeping undisturbed at room temperature for 24 h. The latent footwear impressions were deposited on white and black non-porous surfaces (glass plate, polyethylene panel, polypropylene panel, acryl panel, polyvinyl chloride (PVC) panel, poly(methyl methacrylate) (PMMA) panel, acrylonitrile-butadiene-styrene (ABS) panel, tile), and a semi-porous surfaces (painted wood). The latent footwear impressions on these surfaces were treated with MTN-ALA complex by spraying. The fluorescence of footwear impressions (occurred due to the reaction between MTN-ALA and metal complexes) was observed under a 505 nm forensic light source and an orange barrier filter. The enhancement of latent footwear impression was achieved from black surfaces without any blurring. However, the fluorescence (enhancement) of footwear impression was not observed on the white PVC, PMMA, and ABS surfaces, because the incident light interfered and reflected on the surface. The sensitivity of MTN-ALA was superior to 2,2'-dipyridil, which is a representative non-fluorescing footwear impression enhancement reagent, and similar to 8-hydroxyquinoline, which is a representative fluorescing footwear impression enhancement reagent.

• 한국의상디자인학회지
• /
• 제18권4호
• /
• pp.141-158
• /
• 2016

The objective of this study is to examine the type and characteristics of hat, and also to analyze the formative characteristics of hats shown in $Pr{\hat{e}}t-{\grave{a}}$-porter Collection. The literature review focused on the relevant technical books and preceding researches while the case study targeted 1,561 photos of hats shown in the 'Donga TV Collection'. The research range was from the S/S season of 2012 to the F/W season of 2015/16. The results of this study are as follows. 1. A hat is composed of crown and brim. In the results of classifying hats based on it, there were 572 crown-type hats, 533 hat-type, 219 cap-type, 156 irregular-type, and 81 brim-type in the order. 2. For the crown-type hats, they were mainly like cylindrical-type, bell-type, dome-type, and circle-type, using colors like black, beige, brown, red, mustard, and grey, and materials like wool, fur, velvet, straw, and metal while they were decorated with bead or lace. 3. For the hat-type hats, they were mainly like bell-type, ladder-type, and hemisphere-type, using colors like peach, white, gold, brown, and khaki, and materials like silk, cotton, straw, and wool while they were decorated with feather and ribbon. 4. For the cap-type hats, they were mainly like hemisphere-type, using colors like white, black, khaki, mustard, and purple, and materials like fur, leather, and wool while they were decorated with wappen and chain. 5. For the irregular-type hats, they were mainly like sandglass-type, box-type, animal-type, trumpet-type, and bell-type, using colors like purple, orange, pink, yellow, and sky-blue, and materials like metal, feather, mesh, plastic, straw, and linen while they were decorated with ribbon, net, bell, and flower. 6. For the brim-type visor, they were mainly like square-type, using colors like transparent, yellow, and black, and materials like plastic, cotton, leather, and metal.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.728-734
• /
• 2002

전기로 더스트를 점토 또는 백토와 혼합하여 소성온도에 따른 전기로 더스트 내에 존재하는 Cr, Cd, Cu, Pb, Fe, Zn 중금속들의 거동을 조사하였다. 전기로 더스트를 점토와 백토에 각각 0∼50 wt%씩 첨가하였고, 소성은 $200^{\circ}C$ 간격으로 $200∼1200^{\circ}C$ 범위 내에서 수행하였다. 소성된 시편은 TCLP법에 의한 용출실험을 거친 후 ICP-AES로 분석하였다. 중금속표준용액을 이용한 양이온 교환능 실험결과 점토와 백토가 기존의 중금속 흡착제인 제올라이트와 비슷한 중금속 양이온 교환능을 보였으며, Cr에 대해서는 더 우수한 교환능이 관찰되었다. TCLP법에 의한 용출실험 결과 Cr과 Fe는 모든 시편에서 거의 용출되지 않았으며, Cd과 Zn은 소성온도가 증가하고 전기로 더스트의 함량이 적을수록 용출량이 감소하였다. 점토 또는 백토와 전기로 더스트를 혼합 소성 시 일차적으로 양이온 교환능에 의해 중금속이 준안정화되고 이차적으로 공융반응에 의하여 중금속들이 완전하게 고정화되어 중금속 용출을 억제하는 것으로 추정된다. 본 연구에서 백토가 점토 보다는 전기로 더스트 중금속의 안정화에 더 효과적이었다.

• 해양환경안전학회지
• /
• 제19권6호
• /
• pp.681-687
• /
• 2013

본 연구에서는 240 W급 고출력 LED 집어등의 특성을 기존 메탈 집어등과 비교하여 배광 패턴의 특성 및 광효율을 분석하고, 파장 대역의 특성을 해양 투과 특성 및 시감도를 고려하여 집어등 광원으로써 적정성을 분석하였다. 색온도 6500 K, white LED 패키지를 적용한 240 W LED 집어등의 특성을 보면 배광각은 ${\pm}45^{\circ}$, 조도 변화률이 0.8로 개선되었으며, 광효율은 98.8 lm/W로 향상되었다. LED 집어등의 해수의 투과율과 인간의 암순응시 시감도를 1,500 W 메탈등 1개와 4개의 240 W LED 집어등에 적용하여 비교한 결과, 방사출력이 수심 50 m에 이르면 거의 동등하였으며, 암순응시 시감도만을 적용한 경우에도 LED 집어등이 약 5 % 정도 높은 광속을 나타내었으며, 수심 50 m의 방사출력에 암순응시 시감도를 적용한 경우 LED 집어등의 광속이 14 % 높게 나타나 메탈등의 대체 가능성을 확인할 수 있었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.97-102
• /
• 1998

Transition metal Cr3+ and Fe3+ ion was diffused in white sapphire {0001}, {1010} crystal plane which were grown by the Verneuil method. It enhanced and changed the physical, electrical and optical properties of sapphires. After mixing the metallic oxide and metal powder, it were used for diffusion. Metallic oxide was synthesized by precipitation method and it's composition was mainly alumina which doped with chromium or ferric oxide. In case using metallic oxide, the dopping was slowly progressed and it needed the longer duration time and higher temperature, relatively. Metallic powder was vapoured under 1x10-4 torr of vacuum pressure at 1900(iron metal) and 2050(chromium)℃, first step. Diffusion condition were kept by 6atm of N2 accelerating pressure at 2050∼2150℃. Each surface density of sapphire crystal are 0.225(c) and 0.1199atom/Å2(a). The color of the Cr-doped sapphires was changed to red. Dopping reaction was come out more deep in th plane of {1010} than {0001}. It was speculated that the planar density was one of the factors to determine diffusion effect.

• 대한금속재료학회지
• /
• 제48권6호
• /
• pp.551-556
• /
• 2010

In this report, we describe mold materials that were used to produce movable metal type by the investment casting method during the Joseon dynasty period in Korea. Samples were obtained from the Wibuinja collection, which is held by the National Museum of Korea. Most of the mold material remnants were found in the depressed areas of the movable type specimens, and we therefore performed non-destructive analyses including XRF, EDS, and XRD. Through these analyses, we were able to identify the mold remnants as hydrocerussite [trilead dihydroxide dicarbonate, $Pb_3(CO_3)_2(OH)_2$] formed in platy hexagonal crystallites. Hydrocerussite was first used to make white pigments and cosmetics in ancient Greece, but this is the first report of hydrocerussite used as mold material applied around a disposable pattern for investment casting. The results of this study will further the understanding of the production process for early movable metal type and ancient casting technologies.