• Mycobiology
• /
• v.49 no.1
• /
• pp.86-88
• /
• 2021

The monokaryotic strain, Schizophyllum commune strain IUM1114-SS01, was generated from a basidiospore of dikaryotic parental strain IUM1114. It even showed the decolorizing activities for several textile dyes much better than its parental strain. Based on the results of a single-molecule real-time sequencing technology, we present the draft genome of S. commune IUM1114-SS01, comprising 41.1 Mb with GC contents of the genome were 57.44%. Among 13,380 protein-coding genes, 534 genes are carbon hydrate-active enzyme coding genes.

• Food Science of Animal Resources
• /
• v.22 no.2
• /
• pp.145-150
• /
• 2002

Effects of dietary 0.6% activated carbon on pork quality were investigated with six pigs (Landrace ${\times}$ Large White ${\times}$ Duroc) that were randomly selected from uterine brothers. Three pigs, for control group, were fed with a commercial pig diet for 4 weeks before slaughter whereas the others were fed a diet added 0.6 % activated carbon for treatment group. Pork loin and belly cuts were collected at 24 hrs postmortem, and transfered to laboratory to measure quality characteristics. There were no significant differences in muscle pH and cooking loss % of pork loin and belly. Also there were no significant differences in adhesiveness, cohesiveness, gummness and brittleness between thed treatment and control. However, hardness and springiness of samples from the treatment were significantly higher (p<0.05) than those of control. There were no significant differences in scores of aroma, color and off-flavor assessed by a penal test. Treatment group showed a significantly higher acceptability (p<0.05) compared to the control group. Samples of the treatment had higher concentrations of oleic acid, linoleic acid and linolenic acid, wheres samples of control showed a higher concentration of palmitic acid (p<0.05). Belly cuts of control group showed a significantly higher concentration of stearic acid compared to the treatment group. These results suggested that hardness, springiness and acceptability of pork could be improved, and concentration of unsaturated fat acid in pork muscle might be increased by dietary 0.6 % activated carbon.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.445-454
• /
• 1999

The Sanjeon Au-Ag deposit consists of three subparallel hydrothermal quartz-calcite veins which filled fault-related fractures (generally $N20^{\circ}$ to 35"W-trending and $70^{\circ}$ to $80^{\circ}$ SW-dipping) within quartz porphyry. The vein mineralization shows an apparent variation of mineral assemblages with paragenetic time: (1) early, white quartz + pyrite + arsenopyrite + brown sphalerite, (2) middle, white (vein) to clear quartz (vug) + base-metal sulfides + electrum + argentite, (3) late, calcite + pyrite + native silver. Mineralogic and fluid inclusion data indicate that gold-silver minerals were deposited at temperatures from 2l $0^{\circ}$ to $250^{\circ}$ with salinities of 4 to 5 wt. % equiv. NaCl and log fS2 values from -14.0 to -12.2 atm. The linear relationship between homogenization temperature and salinity data indicates that gold-silver deposition was a result of meteoric water mixing. Ore mineralization occurred at pressure conditions of about 70 bars, which corresponds to the mineralization depths of about 260 m to 700 m. There is a remarkable decrease of the calculated 1)180 values of water from 1.3 to -9.7%0 in hydrothermal fluid with increasing paragenetic time. This indicates a progressive increase of meteoric water influx in the hydrothermal system at the Sanjeon deposit. Oxygen-hydrogen, sulfur, and carbon isotope values of hydrothermal fluids indicate that the ore mineralization was formed largely from meteoric waters with the contribution of sulfur and carbon from a deep igneous source.

• Membrane Journal
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2000

The artificial lung is a device used to replace the function of the lungs. The major function of the lung is to remove carbon dioxide from the venous blood and replace it with oxygen, or arterialize the blood. And the function of the artificial lung is to provide an adequate amount of oxygenated blood to all the tissues of body during the open heart surgery. Extracorporeal life support(ECLS or ECMO) is standard treatment for severe respiratory failure but poses many contributions to future lung transplantation. Artificial Lung or membrane oxygenators available today, based on microporous polypropylene fibers, are associated with two major problems. They require systemic anticoagulation of the patient and they allow serum leakage across the membrane from the blood side to the gas side during long-term use. We obtained newly fabricated polypropylene(PP)/polydimethylsiloxane(PDMS) membranes which combined PP membrane, a microporous support layer with PDMS, and we had investiaged a technique for minimizing serum lekage of polypropylene(PP) membrane. The gas permeability of each PP/PDMS membrane was almost constant before and after the whole blood test by Lee-White method, while that of PP membrane was significantly reduced. Therefore the PP/PDMS membrane could be prevented serum leakage of PP membrane. In addition, the gas permeability of $CO_2$ in PP/PDMS membrane was 11.5 times higher as compared with that of $O_2$.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.303-309
• /
• 2012

Keratinases are of particular interest because of their action on insoluble keratins and generally on a broad range of protein substrates. Alkalophilic and neutrophilic actinomycete strains isolated from different soil samples, rich in keratinaceous substances were screened for keratinolytic activity. An alkalophilic isolate, TBG-S13A5, was found to possess good keratinolytic activity and was able to utilize feather as the sole carbon and nitrogen source. TBG-S13A5 exhibited an off-white aerial mass color with a rectus-flexibilis type of spore chain. The morphological, microscopical and biochemical characters were comparable with that of Streptomyces albidoflavus. Fatty acid methyl ester profiling (FAME) and 16S rDNA sequence analysis confirmed its identity as a strain of S. albidoflavus. Under submerged fermentation conditions, maximum protease production was recorded on the $5^{th}$ day of incubation at $30^{\circ}C$, using basal broth of pH 9.0 with 0.25% (w/v) white chicken feather. This strain could affect feather degradation when the initial pH was 8 and above and maximum protease production was recorded when the initial pH was around 10.5. The effectiveness of the crude enzyme in destaining and leather dehairing were also demonstrated.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.1
• /
• pp.57-65
• /
• 2015

β-Glucosidase production by the white rot fungus Flammulina velutipes CFK 3111 was evaluated using different carbon and nitrogen sources under submerged fermentation. Maximal extracellular enzyme production was 1.6 U/ml, corresponding to a culture grown in sucrose 40 g/land asparagine 10 g/l. High production yield was also obtained with glucose 10 g/land asparagine 4 g/l medium (0.5 U/ml). Parameters affecting the enzyme activity were studied using p-nitrophenyl-β-_D-glucopyranoside as the substrate. Optimal activity was found at 50℃ and pHs 5.0 to 6.0. Under these conditions, β-glucosidase retained 25% of its initial activity after 12 h of incubation and exhibited a half-life of 5 h. The addition of MgCl₂, urea, and ethanol enhanced the β-glucosidase activity up to 47%, whereas FeCl₂, CuSO₄, Cd(NO₃)₂, and cetyltrimethylammonium bromide inflicted a strong inhibitory effect. Glucose and cellobiose also showed an inhibitory effect on the β-glucosidase activity in a concentration-dependent manner. The enzyme had an estimated molecular mass of 75 kDa. To the best of our knowledge, F. velutipes CFK 3111 β-glucosidase production is amongst the highest reported to date, in a basidiomycetous fungus.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1195-1198
• /
• 2013

Nickel hexacyanoferrate supported palladium nanoparticles (Pd-NiHCF NPs) were synthesized and studied for oxygen reduction reactions in direct methanol fuel cell. The NiHCF support was readily synthesized by a comixing of $Ni(OCOCH_3)_2$ and equimolar $K_3[Fe(CN)_6]$ solution into DI water under rigorous stirring. After the preparation of NiHCF support, Pd NPs were loaded on NiHCF via L-ascorbic acid reduction method at $80^{\circ}C$. Pd-NiHCF NPs were electrochemically active for oxygen reduction reaction in 0.1 M $HClO_4$ solution. X-ray absorption near edge structure analysis was conducted to measure the white line intensity of Pd-NiHCF to verify the OH adsorption. As a comparison, carbon supported Pd NPs exhibited same white line intensity. This study provides a general synthetic approach to easily load Pd NPs on porous coordination polymers such as NiHCF and can provide further light to load Pd based alloy NPs on NiHCF framework.

• Conservation Science in Museum
• /
• v.14
• /
• pp.13-22
• /
• 2013

The Nectar Ritual Painting(Jeung7551) in National Museum of Korea is estimated to have been produced in the 16th century. Ezimagodo who is the head priest of Ruganji in Kyoto, Japan donated this painting in 2010. Overall, damages were serious, such as missing, staining, folding, insects of the face and mounting silk, therefore, it need to conservation treatment. The treatment of conservation in painting was removing surface stains and repairing missing area. It was mounted by following the original form. The analysis result of textile in mounting and support fiber used silk and hemp in microscope. Pigments in paint were divided into six color types. This painting was used that vermilion(cinnabar) and red lead for red color, litharge(massicot) and gold for yellow color, lead white for white color, malachite for green color, azurite for blue color, and carbon black(chinese ink) for black color.

• Korean Journal of Heritage: History & Science
• /
• v.35
• /
• pp.138-158
• /
• 2002

To compare and analyze technical system related to manufacturing of ironware during the period of the Three Kingdoms, an analysis was conducted on the minute system of metalwork, as study objects, of the remains of the Mt. Wolpyeong fortress wall in Daejeon in the period of capital during the era of the Three Kingdoms in the 5th century, the Sanwol-ri remains in the 6th century in Gunsan and the remains of ironware excavated from the great ancient tomb of Hwangnam of the Silla dynasty in the 5th century. The result of analysis shows that in the most of the casting products, the minute system of white cast iron were contained. While the iron part of decarbonization was in the system by casting as white cast iron in the central part, on the surface layer it was turned out that comparatively uniform 100% pearlite system of about 1~2mm degree was existing. The part of pearlite on the surface layer was caused by decarbonization, which appears in all the parts of blade front end and handle. Therefore, it was found that the iron part of decarbonization was manufactured by casting, and then was processed at the high temperature by decarbonization. For the products of forging, after processing the products on the basis of pure iron for materials, they manufactured the ironware that raises the strength by carbonizing that keeps carbon infiltrated on the necessary part, by the method of black smith welding that add pure iron to steel, or by varying the method of heat processing onto the part required of strength. Though limited, we could understand that the technical systems for manufacturing skill of ironware in the areas of Baekje and Silla were different each other. In the technical system for Hwangnam great ancient tomb in the Silla area, it is found that they had raised the strength on the necessary part by applying the steelmaking method of carbonizing in the last stage of production of products, in the meantime in Baekje area, it appears that they had produced steel in advance in the first stage of production of the products, and used the produced steel only to the necessary part.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.4
• /
• pp.497-503
• /
• 2022

Spinel ferrites (Ni_xFe_3-xO₄; x = 0.25, 0.5, 0.75 and 1.0) have been prepared at 550℃ by egg white auto-combustion route using egg white at 550℃ and characterized by physicochemical (TGA, IR, XRD, and SEM) and electrochemical (CV and Tafel polarization) techniques. The presence of characteristic vibration peaks in FT-IR and reflection planes in XRD spectra confirmed the formation of spinel ferrites. The prepared oxides were transformed into oxide film on glassy carbon electrodes by coating oxide powder ink using the nafion solution and investigated their electrocatalytic performance for OER in an alkaline solution. The cyclic voltammograms of the oxide electrode did not show any redox peaks in oxygen overpotential regions. The iR-free Tafel polarization curves exhibited two Tafel slopes (b₁ = 59-90 mV decade^-1 and b₂ = 92-124 mV decade^-1) in lower and higher over potential regions, respectively. Ni-substitution in oxide matrix significantly improved the electrocatalytic activity for oxygen evolution reaction. Based on the current density for OER, the 0.75 mol Ni-substituted oxide electrode was found to be the most active electrode among the prepared oxides and showed the highest value of apparent current density (~9 mA cm^-2 at 0.85 V) and lowest Tafel slope (59 mV decade^-1). The OER on oxide electrodes occurred via the formation of chemisorbed intermediate on the active sites of the oxide electrode and follow the second-order mechanism.