• 한국안전학회지
• /
• 제22권6호
• /
• pp.46-54
• /
• 2007

The purpose of this study was to examines the burning rate of fire retardant treated wood in the cone heater with a one-dimensional integral model. The wood samples used in this study were four species. The species of woods are Redwood, White oak, Douglas fir and Maple. Each sample was nominally 50mm thick and 100mm square. Samples were exposed to a range of incident heat fluxes 10 to $35kW/m^2$ using the cone heater. A one-dimension integral model has been used to predict burning rate, heat of gasification, flame heat fluxes, charring rate and char depth of samples. As a result measurement of mass loss rate, softwoods(Redwood and Douglas fir) has relatively low value than those for hardwoods(White oak and Maple). Average charring rate of woods in case of fire retardant treatment showed reduction effect of 41.29%, 50.00%, 48.18% and 60.82% for Redwood, Douglas fir, White fir and Maple, respectively. Almost all the predictions from integral model showed faster charring than those measured. Average difference between predictions and experimental data was 16%, 9.5% and 11.8% for N, F1 and F2 respectively. Water-soluble fire retardant used in this study find out more effect in hardwood than softwood from the result of measurement of mass loss rate and average charring rate.

• 한국화재소방학회논문지
• /
• 제18권4호
• /
• pp.86-92
• /
• 2004

일정한 외부 복사열원(10, 15, 20, 25, and 35 ㎾/㎡)에 노출된 목재의 탄화속도를 측정하기 위해 목재의 종류별로 5개의 시료를 사용하였으며, 목재에 복사열원을 노출시키기 위해 Cone heater를 사용하였다. 시료의 크기는 100㎜×100㎜×50㎜로 Redwood, White oak, Douglas fir, Maple의 4종류의 목재를 사용하였다. 연구결과, 일정한 외부 복사열원에 노출된 목재의 탄화는 시간의 선형함수로 간주 될 수 있다. 일정한 외부 복사열원에 따른 목재의 종류별 탄화속도를 계산할 결과 Redwood가 가장 빠르게 나타나고. Douglas fir가 가장 느리게 나타났으며. 복사열원이 35㎾/㎡일 때 탄화속도는 10㎾/㎡일 때 보다 약 2배정도 빠르게 진행됨을 알 수 있었다. 식 (2)의 α 값은 외부복사열이 10, 15, 20, 25, 35㎾/㎡일 때 각각 1.02, 1.16, 1.23, 1.32, 1.44임을 평가할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.61-71
• /
• 2000

The effect of the treatment with CCFZ, FR-4, and PEG400 from butt end on the dimensional stability and bending properties was examined. Three softwood species such as red pine, Korean white pine and Japanese larch and three hardwood species such as poplar, alder and oak were investigated in this research. Shrinkage of red pine, Korean white pine, poplar, and alder treated with PEG400 decreased. However, there was no significant decrease of shrinkage in Japanese larch and oak. The decrease of shrinkage when moisture content changed from about 20% to 10% was larger than that at any other phase. In regard to the effect of treatment on bending properties, bending MOE and MOR of all specimens treated with PEG400 decreased significantly. Especially in the case of red pine, poplar, and alder treated with PEG400, bending MOR reduced 9%, 14%, and 12%, respectively. Reductions of MOR of the hardwood was also much larger than that of the softwood. However, in all species, treatment with CCFZ and FR-4 did not affect the change of bending MOE and MOR significantly. Comparing the large specimen which also included heartwood with the small specimen which included only treated sapwood, there was a difference in the change of bending MOE and MOR between them. The large specimens of Korean white pine, alder and Poplar, which had a relatively low proportion of sapwood(18~22%), showed the decrease of MOR by 11~13% more than that of small specimens, while red pine, Japanese larch and oak, which had a relatively high proportion of sapwood(35~40%), showed little decrease. It means that bending MOE and MOR of structural wood treated from butt end should be considered in terms of sapwood proportion as well as effect of treated chemicals.

• 농업과학연구
• /
• 제28권2호
• /
• pp.125-131
• /
• 2001

백색부후균 Trametes versicolor(CV5) 균주에 의한 wood lignin의 분해능을 조사하였다. CV5는 활엽수와 침엽수에 속하는 여러 수종의 프로토 리그닌 분해 시 활엽수에 한해서 분해되는 특성을 보였으며, 특히 상수리나무에서 33.5%의 가장 높은 리그닌이 분해되었다. 리그닌 분해에 관련된 phenoloxidase 분비능을 Bavendamm 시험을 통해 검토한 결과 CV5는 지금까지 연구된 우수 백색 부후균과 같은 유사 반응 형태를 나타내고 있음을 확인하였다. 또한 상수리 목재 chip표면에 CV5의 균사가 생육하면서 목재조직이 부후된 상태를 주사전자 현미경으로 관찰한 결과 목섬유 및 도관에서 균사의 침투와 목재조직의 분해를 확인하고 리그닌에 대한 높은 선택적 분해력을 갖고 있음을 구명하였다.

• 대한관절경학회지
• /
• 제5권2호
• /
• pp.85-91
• /
• 2001

목 적 : 반월상 연골판의 관절경적 봉합술후 파열 위치나 동반 손상 여부에 따라 어떠한 결과의 차이가 있었는지 알아보고자 하였다. 대상 및 방법 : 1994년부터 관절경적 봉합술을 시행 후 1년 이상 추시가 가능했던 73례를 대상으로 하였다. 위치에 따라서는 red-red zone이 29례, red-white zone이 36례 그리고 white-white zone이 8례이었다. 26례에서 동반 손상이 있었고 동측 전방 십자 인대 파열이 17례가 있어 동시에 치료하였다. 결과는 OAK system에 의한 기준을 사용하여 평가하였다. 결과 : 양호 이상의 결과를 나타낸 것은 연골판 단독 손상인 경우 $94\%$, 동반 손상이 있었던 경우 $88\%$이었는데, 특히 전방십자인대 파열후 재건술을 동시에 한 경우는 $94\%$로 좋았다. 연골판 파열의 위치에 따른 결과에서는 red-red zone은 $90\%$, red-white zone은 $91\%$, white-white zone은 모든례에서 양호 이상의 결과를 보였다. 결론 : 전방 십자 인대 파열이 동반된 경우는 동시에 치료하는 것이 좋고, white-white zone의 봉합도 가능한 것으로 사료되었다.

• 한국버섯학회지
• /
• 제15권4호
• /
• pp.259-263
• /
• 2017

표고 '농진고'를 LED 혼합광에 따른 갓의 색차 및 경도차를 확인한 결과 갓의 명도값은 형광등 처리구 대비 LED혼합광 처리구 모두 낮아지는 결과를 나타내었다. 적색도는 형광등 처리구에 비해 처리구 모두 높아졌고, 황색도는 낮아지는 결과를 보였다. 광원별 자실체의 생육특성을 조사한 결과 형광등 대조구 대비 처리구 모두에서 갓직경이 컸으며, 자실체들에 대한 균일도는 형광등 처리구 대비 LED를 사용하였을 경우 낮은 값을 나타내어 형광등을 처리하는 것보다 균일도가 있는 것으로 나타났다. 대직경은 처리구간 큰 차이를 보이지는 않았으나 White Green LED에서 다른 처리구보다 높은 것으로 조사되었고, 대길이는 형광등 처리구보다 LED처리구 모두에서 다소 높게 조사되었다. 갓직경과 대길이의 비를 조사한 결과 White Green LED을 제외한 White LED와 White Blue LED에서 형광등 처리구 대비 높은 값을 나타내어 대길이에 비해 갓의 직경이 길어지는 것을 확인할 수 있었다. 자실체 물추출물의 항산화능을 확인한 결과 형광등 처리구에서 가장 높은 항산화능을 확인할 수 있었고 LED 처리는 White LED처리에서 가장 큰 항산화능을 확인하였고 White Green LED, White Blue LED간에는 유의한 차이를 보이지 않았으나 LED처리는 Vitamin C 보다 높은 항산화능을 나타내었다. 위의 결과를 통해 White LED와 White Blue 처리가 표고버섯 자실체의 생육 및 항산화능에 영향을 미치는 광원임을 확인할 수 있었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.97-97
• /
• 2002

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.30-36
• /
• 1994

Steam explosion process is one of the most efficient, pretreatment method for the utilization of lignocellulosic biomass. The carbxymethyl-cellulose(CMC) was prepared with steam exploded wood(EXW), pine(Pinus densiflora) and oak(Quercus mongolica), by standard method using isopropyl alcohol and monochloroacetic acid. The range of water solubility of carboxymethylated pine exploded wood was 45.2~66.8 % and those of oak was 60.7~84.7 %. The degree of substitution(D.S) of carboxymethylated pine exploded wood was 0.11~0.33 and oak exploded wood was 0.48~0.76. The color of carboxymethylated pine and oak exploded wood was brown-black. When carboxymethylated EXW was purified by sulfuric acid, the yield of carboxymethylated wood was lower than non-treated one. However, the color was still brown-black although after delignification. In carboxymethylated EXM prepared after delignification, the water solubility and degree of substitution(D.S) of pine were 81.4~95.9 % and 0.71~0.79, and those of oak were 76.2~89.5 % and 0.79~1.05. The values were higher than non-treated. The degree of substitution of purified carboxymethylated wood prepared with delignified EXM, pine and oak were 0.50~0.71 and 0.70~0.88. The color of carboxymethylated wood was white. In carboxymethylated wood preparde after delignification of EXM, swelling ratio and water retention value of pine were 95.9~96.5 and 580.0~751.2, those of oak were 76.2~89.5 and 124.3~307.6.

• Journal of Forest and Environmental Science
• /
• 제32권2호
• /
• pp.103-112
• /
• 2016

To compare seed components of plus trees, seed powder ground after seedcoat removal was analyzed for two oak species, i. e., Quercus monglica (white oak) and Quercus variabilis (red oak), which are typical oak trees in Korea but have different fruiting characteristics. Thus we aimed at analyzing and comparing many ingredients including minerals, sugars, etc. Two species were similar to each other in the content of water, crude ash, crude protein and carbohydrates, but crude lipid content in Q. variabilis was 2.5 times higher than that in Q. mongolica. Crude proteins of Clone 124 was 1.5 times higher than that of Clone 75 in Q. mongolica. Crude lipid content showed the highest value in Clone 0511 of Q. variabilis, and more phosphate and iron was found in Q. monglica than in Q. variabilis. Glucose showed 85.4% and 88.3% on average of the total monosacchrides in two species, and galactose and arabinose were also found. In the content of phosphate, iron, and crude lipid, differences were found between two species and among clones of two species.

• Journal of Biosystems Engineering
• /
• 제32권2호
• /
• pp.130-135
• /
• 2007

An on-line real time grading and sorting system for dried oak mushrooms was developed for on-site application. Quality grades of the mushrooms were determined according to an industrial specification. Three dimensional visual quality features were used for the grading. A progressive color computer vision system with white LED illumination was implemented to develop an algorithm to extract external quality patterns of the dried oak mushrooms. Cap (top) and gil (stem) surface images were acquired sequentially and side image was obtained using mirror. Algorithms for extracting size, roundness, pattern and color of the cap, thickness, color of the gil and amount of rolled edge of the dried mushroom were developed. Utilizing those quality factors normal and abnormal ones were classified and normal mushrooms were further classified into 30 different grades. The sorting device was developed using microprocessor controlled electro-pneumatic system with stainless buckets. Grading accuracy was around 97% and processing time was 0.4 s in average.