• Smart Media Journal
• /
• v.4 no.2
• /
• pp.17-25
• /
• 2015

In this paper proposes an idea for using NFC(Near Field Communication) on smalt mobile devices, you can easily control the electric wheelchair system. In this system with previous researches controlled a power wheelchair in a mobile device using Bluetooth communication, the board communicates with the integrated control of the wheelchair. With smart mobile devices, the wheelchair control board integrating the signal generated by checking real time so that the user can easily monitor the state of the wheelchair. Users are using smalt mobile devices, the wheelchair can be controlled easily, and the setting at any time according to the state of the individual and can be used. HEX format control is directly in hardware, allowing analysis was read, the user settings are typically used to match cards which support NFC technology such as bus card for registration, storing the selected information and enable read and were applicable. By applying this system, wheelchairs oriented aids disabled and older people able to access to provide with stability.

• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.621-632
• /
• 2009

The purpose of this study was to analyze the physical characteristic of the wheelchair users by directly measuring the disabled men who use a wheelchair and to classify body types. The subjects were 178 male wheelchair users 20-69 years range of age. The results of this study were as follows. The cause of disability was classified into four groups; Poliomyelitis(P), Spinal Cord Injury(S), Cerebral Palsy(C), Amputee(A). There was a remarkable difference in the physical characteristic of the wheelchair users due to their cause of disability. A have greater values in all the dimensions. P have the largest drop values and smaller values in the lower body dimensions. S have greater values in the height of upper body trunk, back interscye length, and chest circumference, whereas smaller values in waist front length and thigh circumference. C have smaller values in most body dimensions except circumference of lower limb. By the factor analysis on the anthropometric data came out the result to be eight factors. The result of cluster analysis using factor scores shows the body types of wheelchair users can be divided into four body types; PY, RBB, TBP, RA. PY type is short and has the largest drop values, whereas RBB type tends to have the smallest drop values. TBP type is tall and the torso tends to be larger than those of the other types. RA type has smaller values in front body dimensions and moderate values in other dimensions. The diversity in body types should be considered among the wheelchair users.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.1
• /
• pp.13-19
• /
• 2013

The aim of this study was to investigate difference of the muscle activation patterns of the upper body during wheelchair cycle ramps ascent of different slopes for disabled with spinal cord injury. Three subjects who is disabled with spinal cord injury participated in this study. Surface electromyography (EMG) data (reaction time [RT], onset-offset time, and peak value of muscle activation) were collected biceps, triceps, upper trapezius, anterior deltoid, latissimus dorsi, and upper rectus abdominal muscles during wheelchair cycle ramps ascent ($0^{\circ}$, $3^{\circ}$, and $6^{\circ}$). For latissimus dorsi muscle, RT and peak value of muscle activation was were increased and offset time was delayed as the slope increased (p < 0.05). These results indicate that wheelchair cycle ramps ascent might cause excessive overuse of latissimus dorsi muscle.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.4
• /
• pp.251-258
• /
• 2014

A wheelchair is a typical mobility aid for the physically disabled or the old and the weak, and is the most commonly used rehabilitation aid. In general, most of users of manual wheelchair have difficulty though vocational rehabilitation and independent living is possible. The reason is that long-distance movement is always accompanied with wheelchair transfer problem because a wheelchair is used as direct means of transport. Hence, the wheelchair transfer problem should be first solved in order that a wheelchair user can independently live. Therefore, this study examined and analyzed the domestic and overseas launched products and patented technologies of wheelchair transfer system for vehicle, and proposed a wheelchair transfer mechanism of a new system for vehicle. This study proposed a wheelchair transfer mechanism for vehicle in order to remove the disadvantage of wheelchair transfer system for vehicle to support the conventional wheelchair user's movement, and in order to conform with the structure of domestic welfare vehicle for the disabled. Because a difference between storage space installed in the roof of vehicle and storage space for leisure, which is generally utilized, gets to disappear by applying this proposed mechanism, popularity among users can be increased. And storage space that has become smaller like this will be capable of decreasing the disadvantage of air resistance in traveling. Besides, because of getting to conform with the structure of welfare vehicle, restrictions on the application range will disappear from small sedan to SUV. Therefore, users can have more choices.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.2
• /
• pp.79-87
• /
• 2018

Purpose: The purpose of this paper is to provide logical basis on enlargement of toilet floor space for the disabled by "ACT ON GUARANTEE OF PROMOTION OF CONVENIENCE OF PERSONS WITH DISABILITIES, THE AGED, PREGNANT WOMEN. ETC" Revised Enforcement regulation [Asterisk 1] (2018.2.10.) and to help with making plans, designs and establishing policies by conducting experimental study with the enhanced floor area regulations. Methods: We conduct Experimental study, field work and interview for this paper. In experimental study, verification of the effective floor area was proceeded by measuring activity space for people in manual wheelchair, electric wheel chair and electric scooter and also reviewed useable area with the space expanded 0.2m both width and depth. In filed work, conducted an observation what other things (ex. sanitary equipment, hand rail and so on) can also affect the active space as well as effective floor space. In the interview, other problems and requirements that were not revealed were experimental study and observation of field work. Results : it's expected to provide better access to toilets for the disabled with the law revision of effective floor area. But, with the usage increasement of enlarged wheel chair and electric wheel chair, expanding side areas of toilet is also highly likely to be required going forward. Implications : Additional research is required on locations of exists and internal arrangement that effect the usage of toilet. It should be led to Universal design by making additional investigation and verification of the users patterns.

• The Journal of Korean Physical Therapy
• /
• v.31 no.4
• /
• pp.228-235
• /
• 2019

Purpose: This study examined the injury and rehabilitation of athletes with disabilities in racket sports projects (i.e., badminton, table tennis, and wheelchair tennis). In addition, the characteristics of each project and the differences among those projects are discussed. Methods: Business team athletes with disabilities in racket sport were enrolled as subjects (i.e., 19 badminton athletes, 19 table tennis athletes, and 19 wheelchair tennis athletes). The real conditions of the injury, injury severity, injury site, symptoms, and rehabilitation methods after injury were analyzed. Results: No significant differences were observed among the actual condition, injury severity, symptoms and the methods of rehabilitation on racket sport for athletes (i.e., badminton, table tennis, and wheelchair tennis athletes) with disability. The differences were focused mainly on the injury sites due to the characteristics of the different projects, and specific technical actions. Conclusion: This study examined the real condition of the injury, injury severity, injury site, symptoms and rehabilitation methods after the injury on the rackets (i.e., badminton, table tennis, and wheelchair tennis) athletes with disabilities. The data can be used to eliminate the incidence of injury and minimize the injury severity for racket athletes with disabilities. In addition, it can also be used for the disabled, who like racket projects, as the fundamental material to prevent injury and assist in recovery.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.211-218
• /
• 2011

We reported the design, prototype, test drive, and mechanical & electrical engineering analyses of a power-lifting wheelchair using mecanum wheels. Mecanum wheels enable translational and rotational movement of the device in any direction on the ground. The power-lifting capability enables the seated individual to reach the standing height of a non-disabled individual. This mecanum wheelchair is fully controlled by the joystick attached to the armrest. The motion of the wheelchair and lifting action of the seat were studied using statics and dynamics. We believe this mecanum wheelchair is a prime candidate for commercial production.

• 재활복지
• /
• v.20 no.1
• /
• pp.211-233
• /
• 2016

The purpose of this study is to figure out problems and to suggest improvement scheme by examining 31 of the disabled who used power wheelchair developed for safe moving and standing support. The results are as follows. First, standing power wheelchair that enables the disabled to sit and stand up was developed. It can also be used as means of transportation for moving in narrow space and in a short distance. In the usability test of this prototype, two groups were respectively examined in 60 evaluation items. One group consisted of 16 people with disabilities using manual wheelchairs. And the other one consisted of 15 people with disabilities using automatic wheelchairs. The entire average figure of two groups was shown to be 2.72 and standard deviation was 0.820. Specifically, the average figure of the group in manual wheelchair was 2.85 and the one of the other group in automatic wheelchair was 2.57. And both group replied that the move to stand up and sit on both types of wheelchair was the most inconvenient thing. It shows why ergonomic design for persons with under extremity disabilities to stand up and sit is needed. Second, with further study based on the results of usability test of the disabled, it will make contribution to increase the quality of people with disabilities by helping them move and do daily lives on their own.

• Journal of the Korean Society of Costume
• /
• v.56 no.6 s.105
• /
• pp.58-71
• /
• 2006

This research is aimed to develop the functional clothing designs for disabled women in the manner of investigating design preferences among them by means of questionnaire and interview with 150 disabled women as respondents and interviewees. The findings of this research are summarized as follows: 1. Regarding satisfaction with ready-made clothes, the respondents answered 'very satisfied' (1.6%), 'usually satisfied' (14.1%), 'moderate' (20.3%) and 'unsatisfied' (53.1%), suggesting that they had been generally unsatisfied with ready-made clothes. 2. There were more disabled women preferring to ready-made clothes with one-grade bigger (loose.) size than the actual one (53.1%) instead of completely fitted size (43.8%) when they purchased such clothes. This result indicates that they prefer to ready-made clothes with bigger size than the actual one because most of such clothes are made up of non-elastic materials which may be unfavorable for wearer's activities. 3. It was found that primarily worn upper garment among them was T-shirt (59.4%). The reason may be that T-shirt is favorable for using prosthesis and orthotics such as wheelchair, walking stick and crutches thanks to its remarkably high activity as well as simple to maintain, compared with other kinds of upper garments. 4. Regarding preferences to functional clothing designs, the primarily worn lower garment among them was trousers (85.9%); the reason was easiness to move. The main reasons of avoiding to wear a skirt included 'difficult to move' (40.6%) and 'exposed disabled region' (30.3%). Accordingly, functional clothing for disabled women should be developed in consideration for their individual characteristics of disability associated with the disabled region such as wheelchair user, crutch user or brace user, In addition, the designs should be made so that they are not different from those for non-disabled people.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.3
• /
• pp.237-243
• /
• 2015

As one of the most widely used assistive technology devices for the disabled in Korea, the powered wheelchair conforms to KS P ISO 7176-5 standard size which uses original version of international standard, ISO 7176-5 without technological modification. However, the international standard is not suitable for the disabled in Korea because it defines the size of wheelchair based on the body size of foreigners, which causes imbalanced posture due to limitation of movement or rotation of pelvis, pressure ulcer incidence due to excessive pressure on the thigh or popliteal space and calf, and safety of reduction due to improper posture. This study suggested the guidance of size for powered wheelchair based on human body size examined by Korean Agency for Technology and Standards, showing a great difference from the size defined in KS P ISO 7176-5 and accordingly redefinition for the size of powered wheelchair is needed.