• 제목/요약/키워드: Wet-drop tests

검색결과 8건 처리시간 0.02초

A study on accumulated damage of steel wedges with dead-rise 10° due to slamming loads

  • Seo, Byoungcheon;Truong, Dac Dung;Cho, Sangrai;Kim, Dongju;Park, Sookeun;Shin, Hyunkyoung
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제10권4호
    • /
    • pp.520-528
    • /
    • 2018
  • This paper presents the results of experimental investigation on the elastic-plastic response of steel unstiffened wedges with dead-rise $10^{\circ}$ subjected to repeated impulsive pressure loadings. Repeated drop tests were performed with both wedge thickness and drop height varied. The pressure and histories were recorded during the tests and the permanent deflections were measured after every drop. Using the recorded test result, the effects of flexibility of wedges and repetition have been investigated. From the pressure history obtained from the tests the characteristics of the impulses were identified. Numerical simulations of the tests were made using the measured pressure history and the permanent deflection predictions were compared with those of the experiments.

받음각을 갖는 평판의 유체 충격 시뮬레이션 (Numerical Simulation for Fluid Impact Loads by Flat Plate with Incident Angles)

  • 이병혁;정성준;류민철;김용수;박종천
    • 대한조선학회논문집
    • /
    • 제45권1호
    • /
    • pp.1-9
    • /
    • 2008
  • The free-surface motions interacting with structures are investigated numerically using the Moving Particle Semi-implicit (MPS) method proposed by Koshizuka et al. (1996) for solving incompressible flow. In the method, Lagrangian moving particles are used instead of Eulerian approach using grid system. Therefore the terms of time derivatives in Navier-Stokes equation can be directly calculated without any numerical diffusion or instabilities due to the fully Lagrangian treatment of fluid particles and topological failure never occur. The MPS method is applied to the numerical study on the fluid impact loads for wet-drop tests in a LNG tank, and the results are compared with experimental ones.

부어초 개발에 관한 기초 연구(I) - 인조섬유 로우프의 정적시험 - (A Basic Study on the Development of Floating Fish Aggregating Devices , Part I - Laboratory Static Tests on Synthetic Fiber Ropes -)

  • 신현경;;;박규원
    • 대한조선학회논문집
    • /
    • 제31권1호
    • /
    • pp.22-31
    • /
    • 1994
  • 해양 공간에 설치되어 유체의 흐름과 지형에 변화를 주며, 대상 수산 생물의 유집에 의한 생산 어장의 조성과 치어의 보호 육성을 도모하는 중효한 어장 시설인 인공어초의 기술 개발은 점차 다양화되어지고 있다. 부체부와 계류부로 구성되어 있는 부어초의 개발에 있어서는 부어초의 특성 및 안전상 계류시스템의 설계가 극히 중요한 부분이 된다. 이 논문에서는 부어초의 계류시스템에 많이 사용되어지는 나일론, 폴리에스터와 폴리에틸렌으로 이루어진 인조섬유로우프의 정적시험의 과정과 그 결과로서의 Creep거동 및 하중-인장 곡선을 얻었다. 특히 나일론 로우프의 경우 수중에서 20%내외의 강도 하락(Strength drop)이 관찰되며, Creep 시험 곡선은 대수시간 축(longerithmic time axis)상에서 직선을 유지하고, Flessner's formula와 평행한 결과를 얻었다.

  • PDF

고체산화물 연료전지의 운전 조건에 따른 니켈 전극 황 피독 현상 (Sulfur Poisoning of Ni Anode as a Function of Operating Conditions in Solid Oxide Fuel Cells)

  • 이호성;이현미;임형태
    • 대한금속재료학회지
    • /
    • 제56권12호
    • /
    • pp.893-899
    • /
    • 2018
  • In the present study, we investigated the sulfur poisoning of the Ni anode in solid oxide fuel cells (SOFCs) as a function of operating conditions. Anode supported cells were fabricated, and sulfur poising tests were conducted as a function of current density, $H_2S$ concentration and humidity in the anode gas. The voltage drop was significant under the higher current density (${\sim}714mA/cm^2$) condition, while it was much reduced under the lower current density (${\sim}389mA/cm^2$) condition, at 100 ppm of $H_2S$. A secondary voltage drop, which occurred only at the high current density, was attributed to Ni oxidation in the anode. Thus, operation at high current density with high $H_2S$ concentration may lead to permanent deterioration in the anode. The effect of water content (10%) on the sulfur poisoning was also investigated through a constant current test (${\sim}500mA/cm^2$) at 10 ppm of $H_2S$. The cell operating with 10% wet anode gas showed a much smaller initial voltage drop, in comparison with a dry anode gas. The present study indicates that operating conditions, such as gas humidity and current density, should be carefully taken into account, especially when fuel cells are operated with $H_2S$ containing fuel.

플라스틱 필름/종이 복합 재질의 직교류 간접증발소자 (Cross Flow Indirect Evaporative Cooler Made of a Plastic Film/Paper Composite)

  • 김내현
    • 대한기계학회논문집B
    • /
    • 제41권1호
    • /
    • pp.21-28
    • /
    • 2017
  • 물의 증발에 따른 냉각 효과를 이용하는 증발냉각방식은 기존 증기 압축식 방식에 비하여 냉방에 소요되는 에너지를 현저히 감소시킬 수 있고 CFC 냉매를 사용하지 않아 친환경적이다. 본 연구에서는 습채널의 물 퍼짐성이 개선된 플라스틱/종이 재질로 크기 $300mm{\times}300mm{\times}300mm$, 채널 핏치 $5mm{\times}5mm$, $5mm{\times}7mm$, $7mm{\times}7mm$의 직교류 간접증발소자를 제작하고 간접증발효율 및 압력 손실을 측정하였다. 간접증발효율은 채널 핏치가 가장 작은 $5mm{\times}5mm$ 소자의 가장 크게 나타났다. 이는 작은 $5mm{\times}5mm$ 소자의 전열 면적이 가장 크기 때문이다. 또한 간접증발소자 설치로 인해 절약되는 에너지도 $5mm{\times}5mm$ 소자에서 가장 크게 나타났다. 한편 습채널의 압력 손실은 건채널의 값보다 크게 나타났다. 이론 해석 모델은 간접증발효율과 압력손실을 과소 예측하였다.

Analytical Model of Salt Budget in the Upper Indian River Lagoon, Florida USA

  • Kim, Young-Taeg
    • Ocean and Polar Research
    • /
    • 제26권1호
    • /
    • pp.33-42
    • /
    • 2004
  • Effect of freshwater discharge on the long-term salt balance in the Northern and Central Indian River Lagoon (IRL) is successfully simulated by a new analytical solution to a water balance-based one-dimensional salt conservation equation. Sensitivity tests show that the salinity levels drop abruptly even during the dry season (November to May) due to the high surface runoff discharge caused by tropical storms, depressions, and passage of cold fronts. Increasing surface runoff and direct precipitation has risen by ten times, lowering the salinity level down to 12psu in the Northern Central zone, and to 17 psu in the Northern zone. However, the salinity level in the Southern Central zone has decreased to 25 psu. High sensitivity of the Northern Central zone to freshwater discharge can be partially explained by a rapid urbanization in this zone. During the dry season, less sensitivity of the Southern Central zone to the increased surface runoff is attributed to the proximity of the zone to the Sebastian Inlet and a strong diffusion condition possibly resulting from the seawater intrusion to the surficial aquifer at the Vero Beach. During the wet season, however, the whole study area is highly sensitive to freshwater discharge due to the weak diffusion conditions. High sensitivity of the IRL to the given diffusion conditions guarantees that the fresh-water release occurs during strong wind conditions, achieving both flood control in the drainage basin and a proper salinity regime in the IRL.

답리작 상치 시설재배지에서의 균핵병 발생생태에 관한 연구 (Ecological Studies on Lettuce Drop Disease Occurring under Controlled Cultivation Conditions in Drained Paddy Fields)

  • 신동범;이준탁
    • 한국식물병리학회지
    • /
    • 제3권4호
    • /
    • pp.252-260
    • /
    • 1987
  • 답후작으로 시설재배되는 상치에 발생한 균핵병의 발생생태에 대하여 조사연구한 결과, 상치 균핵병은 전생육기간을 통하여 발생하였는데, 특히 유묘기에 피해가 심하였다. 후병지$(30\times30\times5cm)$내의 균핵수는 유묘기에 22.0개, 수확기에는 5.3개가 검출되었다. 이상치 균핵병 (S. sclerotiorum)의 균사생장적온은 $25^{\circ}C$였고, $15^{\circ}C$이하의 온도에서는 $20^{\circ}C$이상의 온도에서보다 균핵의 형성수는 적었으나 큰 균핵을 형성하였고 건물중도 높았다. 토양깊이 및 시기별로 균핵을 매몰하였을 때 3월, 4월 9월의 매몰구에서는 토양깊이 3cm구까지 자양반을 형성하였으나, 6월, 12월의 매몰구에서는 90일간의 조사기간내에는 자 반을 형성하지 않았다. 그리고 중력수만 제거한 토양과 담수토양내에서 균핵을 $25^{\circ}C$$30^{\circ}C$로 5주간 처리하였을 때 $100\%$의 균핵이 사멸하였다. 고압멸균된 상치 식물체절편과 함께 균핵을 상치에 접종하였을 때 균핵의 균사형성에 의한 감염이 일어났으며, 포장주위식물에 대한 병원성 조사에서는 조사식물 9과 31종중 화본료 식물을 제외한 8과 25종의 식물에 병원성을 나타냈다. 그러므로 답리작으로 시설재배되는 상치에 발생한 균핵병의 전염원은 포장주위의 기주식물에 형성된 균핵이라고 생각된다.

  • PDF

교차 적층된 파형 액체 제습 소자 (Celdek)에서 LiCl과 LiBr 수용액의 제습 성능 비교 (Comparison of the Dehumidification Performance Between LiCl and LiBr in a Liquid Desiccant Dehumidifying Element Having Criss-Cross Sinusoidal Channels (Celdek))

  • 김내현
    • 한국산학기술학회논문지
    • /
    • 제19권5호
    • /
    • pp.27-34
    • /
    • 2018
  • 최근 들어 공기의 제습에 액체 제습제를 사용하는 방법이 각광을 받고 있다. LiCl과 LiBr은 우수한 열물성으로 인하여 액체 제습 시스템에 널리 사용되고 있다. 본 연구에서는 LiCl과 LiBr 수용액을 사용하여 상용 Celdek 소자의 제습 성능을 실험하였다. 실험은 입구 건습구 온도를 $35^{\circ}C/28^{\circ}C$로 유지하고 전방 풍속을 2.0 m/s에서 4.0 m/s로 변화시키며 수행되었다. 수용액의 입구 온도와 농도는 $20^{\circ}C$, 50%, 수용액의 순환량은 50 kg/h로 유지하였다. 실험 결과 제습량은 풍속이 증가할수록 증가하였다. 또한 LiCl의 제습 성능은 LiBr보다 평균 27% 크게 나타났다. 이는 LiCl의 포화 절대 습도가 LiBr의 포화 절대습도보다 작기 때문이다. 반면 LiBr의 압력 손실은 LiCl보다 평균 12% 크게 나타났다. 한편 LiCl 과 LiBr의 Sherwood 수는 비교적 잘 일치하였다. 이로부터 제습제가 Sherwood 수에 미치는 영향은 미미함을 알 수 있다. 기존 상관식들은 본 실험의 Sherwood 수를 현저히 높게 예측하였다.