• Membrane Journal
• /
• v.22 no.6
• /
• pp.404-414
• /
• 2012

In order to investigate $SO_2$ removal, PEI hollow fiber membranes were produced by a dry-wet phase inversion method. The membrane support layer on surface was coated with PEBAX1657$^{(R)}$ and PEG blending materials. Modules were prepared for the single gas permeation characteristics of composite membrane according to temperature and pressure. As a result, $SO_2$ permeance and $SO_2/N_2$ selectivity were 220~1220 GPU and 100~506 through operating condition, respectively. Moreover, $SO_2/CO_2/N_2$ mixture gas was used to compare the performance of separation properties according to temperature, pressure and retentate flow rate difference. $SO_2$ removal efficiency was increased with pressure and temperature.

• Korean Journal of Materials Research
• /
• v.22 no.5
• /
• pp.253-258
• /
• 2012

Activated magnetite ($Fe_3O_{4-{\delta}}$) was applied to reducing $CO_2$ gas emissions to avoid greenhouse effects. Wet and dry methods were developed as a $CO_2$ removal process. One of the typical dry methods is $CO_2$ decomposition using activated magnetite ($Fe_3O_{4-{\delta}}$). Generally, $Fe_3O_{4-{\delta}}$ is manufactured by reduction of $Fe_3O_4$ by $H_2$ gas. This process has an explosion risk. Therefore, a non-explosive process to make $Fe_3O_{4-{\delta}}$ was studied using $FeC_2O_4{\cdot}2H_2O$ and $N_2$. $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$ were used as starting materials. So, ${\alpha}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method. During the calcination process, $FeC_2O_4{\cdot}2H_2O$ was decomposed to $Fe_3O_4$, CO, and $CO_2$. The specific surface area of the activated magnetite varied with the calcination temperature from 15.43 $m^2/g$ to 9.32 $m^2/g$. The densities of $FeC_2O_4{\cdot}2H_2O$ and $Fe_3O_4$ were 2.28 g/$cm^3$ and 5.2 g/$cm^3$, respectively. Also, the $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by CO. From the TGA results in air of the specimen that was calcined at $450^{\circ}C$ for three hours in $N_2$ atmosphere, the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was estimated. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was 0.3170 when the sample was heat treated at $400^{\circ}C$ for 3 hours and 0.6583 when the sample was heat treated at $450^{\circ}C$ for 3 hours. $Fe_3O_{4-{\delta}}$ was oxidized to $Fe_3O_4$ when $Fe_3O_{4-{\delta}}$ was reacted with $CO_2$ because $CO_2$ is decomposed to C and $O_2$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.1
• /
• pp.57-63
• /
• 2011

Changes in food preferences and dietary habits of Korean prone to decrease consumption of the traditional energy source, rice. The exceeding condition of rice production in Korea is now not only impacting on the profit structure of farmers but also threatening food security. Although there have been several efforts to increase rice consumption rate, by developing various processed foods using rice flour, grain hardness of rice has been the most significant limiting factor. In this study, we addressed the suitability of the Namil(SA)-flo1, a mutant rice line has floury endosperm, in terms of producing rice flour by using dry-milling method, which is lower cost and more eco-friendly than other available methods such as wet-milling. Rice flour of the Namil(SA)-flo1 exhibited superior physico-chemical characteristics to any other check varieties including the wild type, Namil, in terms of distribution of granule sizes and content of damaged starch.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2009

This study was conducted to find out an alternative way of rapid and accurate analysis of forage quality. Near reflectance infrared spectroscopy (NIRS) was used to evaluate the possibility of forage analysis and collect 258 samples such as barley for whole crop silage, forage corn and sudangrass from 2002 to 2007. The samples were analyzed for CP (crude protein), CF (crude fiber), ADF (acid detergent fiber), NDF (neutral detergent fiber) and IVTD (in vitro true digestibility), and also scanned using NIRSystem with wavelength from $400{\sim}2,400nm$. Multiple linear regression was used with wet analysis data for developing the calibration model and validate unknown samples. The important index In this experiment was SEC and SEP $r^2$ for CF, CP, NDF, ADF and IVTD in calibration set were 0.70, 0.86, 0.94, 0.94 and 0.89, also 0.47, 0.39, 0.89, 0.90 and 0.61 in validation sample, respectively. The results of this experiment indicates that NIRS was reliable analytical method to assess forage quality, specially in CF, ADF and IVTD, sample should be included for respective forage samples to get accurate result. More robust calibrations can be made to cover every forage samples if added representative sample set.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.154-160
• /
• 2017

This study was conducted to find out an alternative way of rapid and accurate analysis of chemical composition of permanent pastures in hilly grazing area. Near reflectance infrared spectroscopy (NIRS) was used to evaluate the potential for predicting proximate analysis of permanent pastures in a vegetative stage. 386 pasture samples obtained from hilly grazing area in 2015 and 2016 were scanned for their visible-NIR spectra from 400~2,400nm. 163 samples with different spectral characteristics were selected and analysed for moisture, crude protein (CP), crude ash (CA), acid detergent fiber (ADF) and neutral detergent fiber (NDF). Multiple linear regression was used with wet analysis data and spectra for developing the calibration and validation mode1. Wavelength of 400 to 2500nm and near infrared range with different critical T outlier value 2.5 and 1.5 were used for developing the most suitable equation. The important index in this experiment was SEC and SEP. The $R^2$ value for moisture, CP, CA, CF, Ash, ADF, NDF in calibration set was 0.86, 0.94, 0.91, 0.88, 0.48 and 0.93, respectively. The value in validation set was 0.66, 0.86, 0.83, 0.71, 0.35 and 0.88, respectively. The results of this experiment indicate that NIRS is a reliable analytical method to assess forage quality for CP, CF, NDF except ADF and moisture in permanent pastures when proper samples incorporated into the equation development.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.295-302
• /
• 2005

The nitrogen (N) balance in Korea during 1985-1997 was calculated according to the surface balance method of the PARCOM guidelines and compared with Japanese N balance. The some differences were founded in the coefficients used on calculating N balance in two nations. Of the important parameters, which can make a big difference in balance, N input by organic fertilizers was not included in Korea different with Japanese, due to absence of reliable statistics and then made lower the input. Nitrogen destruction rate from livestock manure was adjusted differently with 15% in Korea but 28% in Japan. There was some difference in the conversion factors of livestock number into manure N quantity in two nations, but the gap was ignoble scale except beef cattle. Our manure N production rate of beef cattle might be evaluated to be so lower than Japanese. Biological N fixation by pulses was very higher in Korea than in Japan but scarcely affect the increase of total N input, due to small cultivation area. In contrast, N fixation rate by free-living organisms in Korean and Japanese wet paddies showed the big difference with 7.6 and $37.0kg\;ha^{-1}\;yr^{-1}$, respectively, and therefore $29.4kg\;ha^{-1}\;yr^{-1}$ of nitrogen was estimated to be more inputted in Japan. Although there are many points to be more specified and improved, still, Korean N balance was very high with $250-257kg\;ha^{-1}$ in the mid of 1990s, which was the second highest level in OECD countries and furthermore increased continuously during the investigation. In contrast in Japan, which has similar fanning system with Korea, N balance was lower with $130-158kg\;ha^{-1}$ and has decreased continuously since 1993. This high N balance was mainly due to a high usage of chemical fertilizers in our intensive fanning system and the fast increment of livestock feeding. Therefore, the more active action to decrease chemical fertilizer utilization and reduce livestock feeding density is required in the government and farmer sides.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.186-193
• /
• 2002

This study was conducted to enhance the protein quality of wheat flour extrudates with the addition of fish sauce by-products and dried biji. The experimental design was used to determine the optimum ratio of each ingredient. The compositional and functional properties of test extrudate were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed that the influence of each ingredient on the mixture final product. Protein content of extrudate was increased by the addition of the dried biji, and bending failure stress of extrudate became hardened due to interaction effects between dried biji and pacific sand lance sauce by-product. Also, the addition of dried biji decreased ash and salt contents. An optimum formulation was obtained as 15.83 : 44.17 : 40% with numerical and 15.74 : 44.26 : 26.40% with graphical method (pacific sand lance sauce by-product : dried biji : wheat flour). Based on the growth performance, feed conversion efficiency was slightly lower than control group, but the protein content in feed extrudate increased to a large extent compared to that mixed with wet biji.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.73-80
• /
• 2007

Compomer that release fluoride could be used on proximal caries of child effectively. But oral cavity is always wet, so saliva inhibits bonding of tooth and compomer. When the saliva exist on bonding, it can be occured microleakages. The purpose of this study was to evaluate the influence of salivary contamination on compomer restoration and degree of microleakage according to restoration methods. Dyract $AP^{(R)}$ and prime and $bond^{(R)}$ NT was applied by the manufacture s instructions. Elipar Trilight was applied for light curing. Saliva pool was made for reconstruction of oral cavity. Two premolar was embedded in acrylic resin. After class II cavity preperation, Dyract $AP^{(R)}$ was restored under several condition, the specimen was thermocycled 500 times with 30 second dwell time. 0.5% methylene blue was used for microleakage test. Micoleakage was measured by the ratio of the infiltration length to occlusal and gingival side interface. Data were analyzed statistically using Kruskal Wallis Test, Mann-Whitney Test. The Result were as follows ; 1. In occlusal side, there were no statistical differences. 2. In gingival side, there were no statistical differences in Group III ($ContactMatrix^{TM}$, Rubber dam, $Oraseal^{(R)}$), Group IV (No saliva contamination). 3. In gingival side, there were no statistical differences in Group I$(ContactMatrix^{TM})$, II($ContactMatrix^{TM}$, Rubber dam). 4. In gingival side, there were statistical differences in Group I$(ContactMatrix^{TM})$, II($ContactMatrix^{TM}$, Rubber dam).

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.61-69
• /
• 1995

It is hard to synthesize pure $BaTiO_3$ from $BaCO_3$ and $TiO_2$ in solid reaction for the activity of BaO and secondary phase. For this reason, the wet chemical techniques have been studied. Starting material which was used in these methods were expensive and the properties of powder which was synthesized in same defined. So, some process have been studying again to improve soild reaction method. This study which was one of those was to defin the forming mechanism of $Ba_2TiO_4$ and to control some condition of $Ba_2TiO_4$. The synthesis temperature of $BaTiO_3$ in solid reaction was near $1120^{\circ}C$. The quantity and forming temperature of $Ba_2TiO_4$ could be controlled by atmosphere heat treatment. $Ba_2TiO_4$ was related to expansion in Ba-rich region of $BaTiO_3$. $BaTiO_2O_5$ and $BaTiO_3O_7$ was reason to expand in Ti-rich region. The dielectrics of $CeAIO_3$ which was synthesized and sintered in reduction atmosphere and $BaTiO_3$ system were affected by $CeO_2$ which was formed for the decomposition of $CeAIO_3$ heat treatment in air.

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.365-370
• /
• 2014

This study was conducted to determine the effects of seed storage methods ($-20^{\circ}C$, stratification, $2^{\circ}C$ dry, $2^{\circ}C$ wet and room temperature) and $GA_3$ application (control, $dH_2O$, 10, 100, 1000 ppm) on seed germination and seedling growth of S. lyratum. As a result seed germination rate of S. lyratum was the highest at 91% when seeds were stored at room temperature and then soaked for 24 hours in $GA_3$ 10 ppm. And seedlings of S. lyratum showed the best quality when seed were stored at $2^{\circ}C$ dry and then soaked for 24 hours in $GA_3$ 1000 ppm, with the growth characteristics of plant height (47 mm), number of leaves (8), leaf width (12 mm), leaf length (19 mm), fresh weight (aerial/root part; 471/476 mg), dry weight (aerial/root; 106/41 mg) and seedling quality indices (106). Therefore, S. lyratum seed were stored at $2^{\circ}C$ dry, and then soaked for 24 hours in $GA_3$ 1000 ppm, seed germination rate was more than 80% and production of superior quality container seedlings.