• 한국식품조리과학회지
• /
• 제25권1호
• /
• pp.31-38
• /
• 2009

The noodle is one of the most popular meal as a main dish in Korea and onions are reported to contain high levels of flavonoids such as quercetin, aglycone, and quercetin 4-glycoside. This study was conducted to develop the wet noodle with onion juice and to examine the cooking quality, textural properties of it. Five sensory attributes such as gloss, chewiness, adhesiveness, odor, and taste were used for sensory evaluations. Optimal amount of onion(149.5 g) and salt (6.5 g) satisfied target sensory score(7.0) was suggested by response surface methodology. The wet noodle with optimal amount of onion juice and salt was tasted by 100 consumer and showed high score(6.67) in overall acceptability. Cooking quality was measured through absorption of water, volume, degree of turbidity. The volume, water absorption, and cooking water turbidity of cooked wet noodle with onion juice(experimental noodle) were significantly(p<0.01) higher than the control one. Texture profile analysis of experimental noodle showed a lower score of hardness, adhesiveness, springiness, and chewiness. However, it appeared that the experimental noodle showed higher score for cohesiveness than the control noodle.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.33-38
• /
• 2013

Many occupational workers or professionals have to walk on the various floors for a long period of time. The objective of this study was to develop the safety shoes with increased traction through the material selection. In order to fulfill our objective, first, two kinds of filler were selected to compare the wear mechanism at outsole surface. The developed rubber materials were tested with two kinds of portable slip meters. The sample safety shoes with developed rubber materials were also tested with subject in the laboratory. During walking, the safety shoes were naturally abraded with counter surface. The coefficient of friction(COF) was gradually decreased with number of steps to 30,000, while the COF was abruptly increased from 30,000 to 40,000. The experimental results showed that COF tested with silica rubber was at least 10% higher than that with carbon black rubber in wet or detergent condition. It has been well recognized that filler properties play a important role in wet traction in the tire industry. However it has been unclear that filler properties would be decisive factor in safety shoes. Our study shows that silica exhibits a higher slip resistance than carbon black without reference to wear states in wet or detergent condition. So, this results will provide guides for outsole compounders to develop new products and improve product performance.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.523-530
• /
• 2017

In this study, we developed the h-BN interphase for ceramic matrix composites (CMCs) through a wet chemical coating method, which has excellent price competitiveness and is a simple process as a departure from the existing high cost chemical vapor deposition method. The optimum condition for nitriding an h-BN interphase using boric acid and urea as precursors were derived, and the h-BN interphase coating through a wet method on a carbon preform of 2.5 D was conducted to apply the optimum conditions to the CMCs. In order to control the coating property via the wet coating method, four parameters were investigated such as dipping time of the specimen in the precursor solution, the ratio of boric acid and urea in the precursor, the concentration of solution where the precursor was dissolved, and the cycle of dipping and dry process. The CMCs was fabricated through polymer impregnation and pyrolysis (PIP) processes and a three-point flexural strength test was conducted to verify the role of the coated h-BN interphase.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.423-428
• /
• 2019

Visibility of road-surface markings is one of the critical issues that should be secured for self-driving cars as well as human drivers. Glass beads are taking on the role of retroreflectors, and therefore are considered a necessity in modern pavements. In this context, retroreflectance is sensitively dependent not only on the refractive index of glass beads but also on that of the surrounding medium. This implies that the optimum refractive index of glass beads immersed in water, i.e. under wet conditions, is different from that of glass beads surrounded by air, i.e. under dry conditions. A refractive index of approximately 1.9, which is known to maximize retroreflectance under dry conditions, actually exhibits much poorer retroreflectance under wet conditions. This suggests that glass beads with optimal refractive index for wet conditions need to be installed together with those for dry conditions. We propose a facile but practical model capable of calculating retroreflectance of glass beads surrounded by an arbitrary medium, here water in particular, and experimentally verify its capability of assessing the refractive index of commercial glass beads. Changes in retroreflectance according to the mixing ratio of glass beads with different refractive indices are also discussed, in an effort to propose the proper use of glass beads produced for dry and wet conditions.

• 대한소아치과학회지
• /
• 제30권4호
• /
• pp.545-553
• /
• 2003

상아질 접착력을 높이기 위해서는 적절히 습윤한 상아질 표면을 얻는 것이 중요하다. 이런 방법에는 정확한 지침이 없으며, 주관적이고 술자에 따라 많은 차이가 있다. 본 연구에서는 적절히 습윤한 상아질을 얻는 방법에 관한 연구의 일환으로, 유치의 산부식 후. 여러 가지 방법을 이용해 상아질을 건조시킨 표본의 조직상을 획득하여 상아질 표면의 차이를 비교하고자 하여 다음과 같은 결론을 얻었다. 1. 유치 상아질을 산부식하면, 도말층이 제거되고 상아세관이 노출되며, 관간상아질과 관주상아질이 탈회되고, 교원섬유가 풍부한 이행층이 노출되는 것을 확인할 수 있었다. 2. 산부식된 상아질이 과도하게 건조되면 탈회된 상아질이 수축하여, 관간상아질이 붕괴되어 높이가 점차적으로 낮아지고 상아세관의 직경은 조금씩 감소되는 것으로 나타났다. 3. 유치 산부식 후, 10cm 거리에서 20초 동안 압축 공기로 건조시키면 상아질이 과도하게 건조, 탈수됨을 확인할 수 있었다. 4. 유치 산부식 후, 10cm 거리에서 3초 동안 압축 공기로 건조시키거나 마른 cotton, 젖은 cotton, microbrush, absorbent tissue paper로 건조시키면 상아질이 적절하게 건조됨을 확인할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.755-756
• /
• 2009

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.156-156
• /
• 2009

High efficiency silicon solar cell technology based on planar technology has been improved by various kinds of process by using the wet etching process. In particular, the buried contact solar cell has been successfully studied. In the present work, a simplified process of the buried contact solar cell has been suggested to help one design effectively the high-efficiency solar cell.

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.913-921
• /
• 2009

In this study, supercritical nano plating was performed to observe its effect on materials. Using supercritical carbon dioxide as a solvent, we observed how different pressures and temperatures of the supercritical fluid affected the process and its outcome. The plating current increases as pressure increases from 8 MPa to 16 MPa, but it decreases after that. Similarly, the plating current increases as temperature is increased from $35^{\circ}C$ to $45^{\circ}C$, but the current decreases after that. Also, the thickness of the wet electrolyte plating is about $35\sim50{\mu}m$, while the thickness of the plating done using supercritical fluid is about $20\sim25{\mu}m$. At the results, It to it is considered that supercritical nano plating enable to form more thin and stable plating than wet electroplating methods. Also both of the electroplating methods could be affected plating quality by surface condition, and the supercritical nano plating has been confirmed to product more uniform plating surface than wet electroplating.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.132-138
• /
• 2020

A facile one-pot wet chemical process to prepare pure anatase TiO₂ hollow structures using ammonium hexafluorotitanate as a precursor is developed. By defining the formic acid ratio, we fabricate TiO₂ hollow structures containing fluorine on the surface. The TiO₂ hollow sphere is composed of an anatase phase containing fluorine by various analytical techniques. A possible formation mechanism for the obtained hollow samples by self-transformation and Ostwald ripening is proposed. The TiO₂ hollow structures containing fluorine exhibits 1.2 - 2.7 times higher performance than their counterparts in photocatalytic activity. The enhanced photocatalytic activity of the TiO₂ hollow structures is attributed to the combined effects of high crystallinity, specific surface area (62 ㎡g^-1), and the advantage of surface fluorine ions (at 8%) having strong electron-withdrawing ability of the surface ≡ Ti-F groups reduces the recombination of photogenerated electrons and holes.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.17-23
• /
• 2013

PURPOSES : This study aimed to measure the skid resistance of the sidewalk in order to find out the relationship between different surface types and skid resistance. By using British Pendulum Tester, skid resistance of sidewalk was measured in a wet after snow-melt, sludgy, and snowy conditions. METHODS : The skid resistance was measured on surfaces including Concrete Interlocking Block Paving, Colour Asphalt Pavement, Granite Block Paving, Manhole, and Tactile Paving for Visually Impaired. Five trials at each measurement were made, and the average and standard deviation were derived. RESULTS : The skid resistance measured in wet after snow-melt, sludgy, and snowy conditions for the various surface types are summarized and compared. Reduction rates of skid resistance of sludgy and snowy against wet after snow-melt are also analysed. The skid resistance variation between measurement points which mimic pedestrian route in study site are analysed to check out the consistency of the skid resistance along the sidewalk. CONCLUSIONS : The study concluded that the skid resistance of sidewalk surfaces varied depending on the surface types and weather conditions. Secondly, reduction rates of skid resistance according to weather changes are varied depending on the surface types, Thirdly, consistency of skid resistance along the pedestrian route is hardly acquired in the study site at least. So, future study on the consistency evaluation for skid resistance along sidewalk is strongly recommended.