• 제목/요약/키워드: Wet Straw

검색결과 42건 처리시간 0.028초

Effect of By-product Feed-based Silage Feeding on the Performance, Blood Metabolites, and Carcass Characteristics of Hanwoo Steers (a Field Study)

  • Kim, Y.I.;Park, J.M.;Lee, Y.H.;Lee, M.;Choi, D.Y.;Kwak, Wan-Sup
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권2호
    • /
    • pp.180-187
    • /
    • 2015
  • This study was conducted to determine the effects of feeding by-product feed (BF)-based silage on the performance, blood metabolite parameters, and carcass characteristics of Hanwoo steers. The BF-based silage was composed of 50% spent mushroom substrate, 21% recycled poultry bedding, 15% cut ryegrass straw, 10.8% rice bran, 2% molasses, 0.6% bentonite, and 0.6% microbial additive (on a wet basis), and ensiled for over 5 d. Fifteen steers were allocated to three diets during the growing and fattening periods (3.1 and 9.8 months, respectively): a control diet (concentrate mix and free access to rice straw), a 50% BF-based silage diet (control diet+50% of maximum BF-based silage intake), and a 100% BF-based silage diet (the same amount of concentrate mix and ad libitum BF-based silage). The BF-based silage was fed during the growing and fattening periods, and was replaced with larger particles of rice straw during the finishing period. After 19.6 months of the whole period all the steers were slaughtered. Compared with feeding rice straw, feeding BF-based silage tended (p = 0.10) to increase the average daily gain (27%) and feed efficiency (18%) of the growing steers, caused by increased voluntary feed intake. Feeding BF-based silage had little effect on serum constituents, electrolytes, enzymes, or the blood cell profiles of fattening steers, except for low serum Ca and high blood urea concentrations (p<0.05). Feeding BF-based silage did not affect cold carcass weight, yield traits such as back fat thickness, longissimus muscle area, yield index or yield grade, or quality traits such as meat color, fat color, texture, maturity, marbling score, or quality grade. However, it improved good quality grade (1+ and 1++) appearance rates (60% for the control group vs 100% for the BF-based silage-fed groups). In conclusion, cheap BF-based silage could be successfully used as a good quality roughage source for beef cattle.

Ensiling Characteristics and the In situ Nutrient Degradability of a By-product Feed-based Silage

  • Kim, Y.I.;Oh, Y.K.;Park, K.K.;Kwak, W.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제27권2호
    • /
    • pp.201-208
    • /
    • 2014
  • This study was conducted to evaluate the ensiling characteristics and the in situ degradability of a by-product feed (BF)-based silage. Before ensilation, the BF-based mixture was composed of 50% spent mushroom substrate, 21% recycled poultry bedding, 15% ryegrass straw, 10.8% rice bran, 2% molasses, 0.6% bentonite, and 0.6% microbial inoculant on a wet basis and ensiled for up to 4 weeks. The BF-based silage contained on average 39.3% moisture, 13.4% crude protein (CP), and 52.2% neutral detergent fiber (NDF), 49% total digestible nutrient, and 37.8% physically effective $NDF_{1.18}$ on a dry matter (DM) basis. Ensiling the BF-based silage for up to 4 weeks affected (p<0.01) the chemical composition to a small extent, increased (p<0.05) the lactic acid and $NH_3$-N content, and decreased (p<0.05) both the total bacterial and lactic acid bacterial counts from $10^9$ to $10^8$ cfu/g when compared to that before ensiling. These parameters indicated that the silage was fermented and stored well during the 4-week ensiling period. Compared with rice or ryegrass straws, the BF-based silage had a higher (p<0.05) water-soluble and filterable fraction, a lower insoluble degradable DM and CP fraction (p<0.05), a lower digestible NDF (p<0.05) fraction, a higher (p<0.05) DM and CP disappearance and degradability rate, and a lower (p<0.05) NDF disappearance and degradability rate. These results indicated that cheap, good-quality BF-based roughage could be produced by ensiling SMS, RPB, rice bran, and a minimal amount of straw.

강우시 영농기와 비영농기의 광역논에서의 부유물질 (SS)과 COD의 유출특성 (SS and COD Runoff from a Rice Field Watershed during Storm Events in the Growing and Non-growing Seasons)

  • 이정범;이재용;김진수
    • 한국농공학회논문집
    • /
    • 제59권2호
    • /
    • pp.91-99
    • /
    • 2017
  • The objective of this research was to investigate runoff characteristics of suspended solid (SS) and chemical oxygen demand (COD) from a paddy field watershed during storm events in the growing and non-growing seasons. Average of event mean concentration (EMC) of pollutants were 56.9 mg/L for SS and 23.9 mg/L for COD in the non-growing season and 50.3 mg/L for SS and 11.9 mg/L for COD in the growing season. The average EMC of SS in the study area was much lower than that in the uplands irrespective of cultivation, suggesting that paddy fields control soil erosion. This may be because flooding and wet soil in the growing season, and rice straw residue and stubble on the topsoil in the non-growing season reduce soil erosion. The changing tillage practice from fall tillage to spring tillage avoids soil erosion due to shortening of the tilled fallow period. However, the average EMC of COD in the non-growing season was about twice as much that in the growing season likely due to the runoff of organics like rice straw residues. The relationship between SS and COD loads and stormwater runoff volume was expressed by power function. The exponent for SS was higher than that for COD, suggesting that SS load increased with stormflow runoff more than COD load did. The mean SS and COD loads per storm during the non-growing season were much lower than those in the growing season, and therefore non-point source pollution in the growing season should be managed well.

PREPERATION OF AMPHOTERIC STARCHS AND STUDY ON WET END CHEMISTRY IN PAPERMAKING

  • Shan, Chen-Fu;Su, Xie-Lai;Yi, Wang-Hai;Quan, Long-Yan
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
    • /
    • pp.386-389
    • /
    • 1999
  • Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.

탈곡기의 선별 성능을 측정하는 방법의 개발에 관한 연구 (Development of Method for Measuring the Grain Separating Performance of Threshers)

  • 이승기;정창주
    • 한국농공학회지
    • /
    • 제17권1호
    • /
    • pp.3655-3665
    • /
    • 1975
  • This study was intended to develop a method for measuring the grain separating performance of threshers. The grain separating apparatus used for the experiment was designed and constructed, the function of which was to separate pneumatically mature and immature grain, chaff, straw, dust, and other impurities from the products of threshing. The apparatus has five material outlets where grains and impurities are fallen down by separation depending upon the specific gravity of the material white it moves above the outlets. The principle of design was to separate the mixture of mature grain, immature grain and chaff as distinct as possible, and to induce the mature grains onto the first outlet, the immature grains onto the second and the third, and the straw wastes onto the forth and the fifth outlets. The developed apparatus was tested to evaluate its separating performance with two rice varieties (Tongil and Mine-hikari) at different moisture levels and air velocities. The optimum conditions for operating the apparatus were found from experiment. The results are summarized as follows; 1. The degrees of separation, especially the amount of immature grain contained in the mature paddy, were dependent upon air speed delivered. The optimum air velocities for this apparatus for each levels of grain moisture contents were found from a series of experiments as follows; 14.7-15.3m/sec. for grain of 16 percent moisture content in wet basis, 15.3-16.0m/sec. for 20 percent, and 16.0-16.4m/sec for 24 percent. 2. Composition ratios determined based on the brine separating method was fairly well acted upon the developed apparatus, indicating its recollecting rate of the mature grains as 97.6 to 99.9 percent. The developed separatus acted similarly upon the two rice varieties which had different composition of immature paddy grain. In other words, the separating performance by the apparatus had a good correlation with the one by the brine separating method. 3. As immature grains were separated out unsatisfactory in these experiments than the brine separating method, further investigation may be needed to improve a separating performance of these materials. But the results obtained suggested a possibility of using the tester to replace the current hand separating method, ther eby enabling more consistent test results and also eliminating nearly all costly hand seperating operations.

  • PDF

식물체를 이용한 조류증식억제 효과 (Inhibitory Effect of Microcystis aeruginosa (Cyanophyceae) Growth by Plants in vitro)

  • 정원화;변명섭;전선옥;임병진
    • 생태와환경
    • /
    • 제33권2호통권90호
    • /
    • pp.136-144
    • /
    • 2000
  • 팔당호 주변에서 자생하는 식물체를 이용하여 실험실 내에서 배양된 남조류에 투여하여 조류증식 억제 효율을 조사하였다. 조류 성장 억제 효과에 있어 육상식물을 이용하는 경우 조류 밀도가 10$^{4}$ cells/ml 범위에서의 0.5g/l 투여량은 전혀 효과를 나타내지 못했던 반면, 2.5 g/l 투여량에서는 95% 이상의 효과를 보였다. 조류 밀도가 10$^{6}$ cells/ml 범위에서의 육상식물 투여량은 2.5 g/l 이상이 필요했다. 조류성장 억제에 육상식물은 잣잎, 수생식물은 애기마름이 큰 효과를 보였다. 애기마름 투여조는 조류 밀도가 10$^{6}$ cells/ml 범위에서도 2.5 g/l 투여량으로 50%의 억제 효율이 나타났다. 식물을 이용한 조류 증식 억제 효과는 식물 투여 후 7일째 후 가장 효과가 좋은 것으로 나타났다. 습체, 건체, 추출물 비교시 추출물이 가장 효과가 좋은 것으로 육상식물 투여조의 경우 1.25 g/l 투여량에 비해 2.5 g/l 투여량에서 현저한 효과를 보였고, 애기마름은 1.25 g/l 투여량에서도 99%의 효과를 보였다. 건체식물은 습체식물에 비해 초기에도 높은 효과를 보였다. 조류의 비증식속도로 보았을 때도 식물체 추출물을 투여했을 때 가장 효과가 좋았고 다음으로 건체, 습체식물 투여순으로 조류 증식억제 효과를 나타내었다.

  • PDF

버섯폐배지와 맥주박 첨가 섬유질발효사료 급여가 흑염소의 생산성, 사료섭취량 및 영양소 소화율에 미치는 영향 (Effects of Total Mixed Fermentations with Spent Mushroom (Flammuliua velutipes) and Wet Brewer's Grain on Growth Performance, Feed Intake and Nutrient Digestibility in Korean Black Goats)

  • 황보순
    • 한국초지조사료학회지
    • /
    • 제34권1호
    • /
    • pp.45-51
    • /
    • 2014
  • 본 연구는 버섯폐배지와 맥주박을 이용한 섬유질 발효사료의 급여효과를 알아보기 위해 흑염소의 생산성과 영양소 이용율을 조사하였다. 증체조사를 위한 사양 시험은 거세흑염소 20두를 이용하여 처리구당 5두씩 30일간 수행하였고, 소화율 시험은 거세흑염소 12두를 공시하여 처리구당 3두씩 라틴방각법으로 실시하여, 처리구는 대조구(배합사료 및 볏짚 급여구)와 3개의 시험구(버섯폐배지, 맥주박 비율이 각각 15와 25%(T1), 10과 30%(T2) 및 5와 35%(T3))로 각각 배치하였다. 일당증체량은 대조구와 T1구가 T3구 보다 유의하게 높게 나타났다(p<0.05). 1일 두당 건물섭취량과 유기물섭취량은 T1과 T2구가 대조구 보다 유의하게 높은 섭취량을 보였다(p<0.05). 건물소화율과 유기물소화율은 대조구와 T1구가 각각 62.39∼63.39%와 65.02~65.25%로 T3구의 각각 56.39와 59.01% 보다 유의하게 높게 나타났다(p<0.05). 질소축적량은 T1구가 가장 높게 나타났다(p<0.05). 따라서, 본 연구의 결과 버섯폐배지와 맥주박을 이용한 섬유질 발효사료는 시판사료를 급여한 대조구와 대등한 생산성과 영양소 이용율을 보였다. 그러나 버섯폐배지의 첨가 비율이 높아질수록 흑염소의 생산성 저하가 우려되므로 버섯폐배지 첨가는 25~30% 수준으로 배합하는 것이 필요하다 판단된다.

Current situation and future prospects for beef production in Lao People's Democratic Republic - A review

  • Napasirth, Pattaya;Napasirth, Viengsakoun
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제31권7호
    • /
    • pp.961-967
    • /
    • 2018
  • Lao-native beef cattle are primarily Bos indicus, and most ruminant production in Laos is still dominated by small-scale or backyard producers that use traditional practices, resulting in low productivity. The cattle herd size in Laos has grown by an average of 5 percent per year from 1.52 million in 2010/11 to 1.81 million in 2014/15. In 2016, the Laos cattle population was 1.88 million head, with smallholder farmers representing 98% of production despite efforts by the Laos government to develop commercial-scale farms. There were 170 commercial cattle farms in 2016, with 56 percent in the Central region of Laos. Although, overall, ruminant meat production has tended to increase but with consumption at 7.29 kg/capita/yr in 2013, it remains insufficient to meet demand. Crop residues and agro-industrial by-products used in ruminant diets include rice straw, cassava pulp and wet brewers' grains as roughage, energy and protein sources, respectively. The Belt and Road Initiative proposed by China in 2013 will connect China closely with all countries in Southeast Asia. This initiative will change landlocked Laos to land linked for investors who will benefit from convenient transport at a lower cost, promoting agricultural production in Laos.

수급식탈곡기(穗給式脱穀機)의 공급율(供給率) 제어(制御)(II) -제어시스템 설계 및 시뮬레이션- (Feed Rate Control for the Head-Feed Thresher)

  • 최영수;정창주
    • Journal of Biosystems Engineering
    • /
    • 제15권2호
    • /
    • pp.110-122
    • /
    • 1990
  • This study was undertaken to develop the feed rate control system for the head feed thresher by making use of the microprocessor and to evaluate the response of the system to a various threshing conditions. The control unit was composed of one-board microcomputer. The speed of the wet-paddy feeding chain was controlled by dc moter with PI controller. It was used the adaptive control method to maintain the constant feed rate regardless of the fed rice varieties. The sliding type potentiometer was used as the feed rate sensor, which was attached on the sheaf-holding apparatus. The mathematical models of the system components were derived and computer simulation was developed for investigating the parameters affecting on control performance and for estimating the response of the system. A one-board microcomputer-based feed rate control system developed in this study was properly functioned and assessed as adequate for the feed rate control system of the head feed thresher. Based on the simulation for the bundle feed, it was anticipated that the lower setting value of the cylinder speed(RL) is to be set higher than the limiting operational speed. In addition, the higher setting value of the cylinder speed(RH) is to be set lower than the limiting cylinder speed for threshing. The computer simulation for the continuous spread feed showed that the lower the setting value of straw layer thickness(LL) was set, the shorter the correction time. However, if too low LL may be established, the feed rate could not reach to its desired rate.

  • PDF

원추형(圓錐型) 탈곡기(脱糓機)에 관(關)한 연구(硏究) (Study on Cone Type Thresher (I))

  • 이승규
    • Journal of Biosystems Engineering
    • /
    • 제6권1호
    • /
    • pp.48-59
    • /
    • 1981
  • The major limiting factor on the determination of combine capacity is the frequent occurence of clogging over the some parts of machine when the crop is wet in the case of Japanese self-feeding type combine. And in the case of American conventional combine having big separating parts, the great grain loss and damage occur when the machine is used for rice harvesting. This experiment was carried out to develop the new type threshing and separating equipment. Proto-type thresher which consist of a conical threshing drum and a conical separating sieve rotating around the threshing cone was constructed and tested. In the case of 800 rpm of threshing cone speed, average threshing loss was below 1 percent, separating loss was about 1 percent, grain damage was about 0.4 percent, and average total power required was about 2.6 PS. This design has some problems such as higher power required or wrapping problems under the conditions of feeding long damp straw. But, compared with the conventional combine or thresher, this machine certainly has some potentials for this approach to combine development. The crop feed rate must be increased through improvement of the feeding portion of the threshing cone. And it is required to investigate further about some parameters causing wrapping phenomena.

  • PDF