• 한국건설순환자원학회논문집
• /
• 제6권1호
• /
• pp.111-119
• /
• 2011

근래 도시 재개발사업 및 사회기반 시설의 확충 등으로 건설현장에서는 막대한 양의 건설폐기물이 발생량은 매년 증가되는 추세에 있다. 이와 같은 건설폐기물의 처리는 국가, 사회적으로 이슈로 부각되고 있으며, 이중 폐콘크리트의 중간처리 과정에서 발생되는 폐슬러지는 현재까지 유효활용되지 못하고 대부분 폐기 또는 매립되고 있는 실정이다. 따라서 본 연구에서는 건설폐기물 중간처리시설 중 습식방식에 의한 순환골재 생산시 필연적으로 부산되는 폐슬러지를 시멘트 복합체용 사용재료(바인더, 충진재 등)로 활용하기 위한 방안을 모색하기 위하여 순환미분말의 가열온도, 혼입조건, 적용용도별에 따른 모르타르의 물리, 역학적 특성을 검토하였다. 연구결과 모든 가열온도 조건에서 순환미분말의 주성분은 $SiO_2$와 CaO인 것으로 나타났으며, 여기에서 유의할 점은 순환미분말의 CaO 함량은 종래 일반적으로 활용되는 보통 포틀랜드 시멘트에 비하여 작은 함량을 나타냈다. 그리고 건조 및 가열온도 조건별에 따른 모르타르의 유동특성은 가열온도가 증가함에 따라 감소되는 결과를 나타냈고 압축강도 및 기공특성의 경우는 $600^{\circ}C$에서 가장 우수한 특성을 나타냈다. 따라서 건설폐기물 중간처리시설에서 발생되는 순환미분말의 재수화성 부여를 위한 유효 온도조건은 $600^{\circ}C$인 것으로 확인되었다.

• 한국세라믹학회지
• /
• 제28권10호
• /
• pp.757-766
• /
• 1991

These powder properties were investigated and prepared of ultrafine Mn-Zn ferrite powder by Direct-wet process from variation of oxidation condition. H2O2 oxidation the products were ultrafine spherical particles of about 400${\AA}$ in diameter and superparamagnetics. H2O2 and Air oxidation, Coexistance ultrafine spherical particles of about 400${\AA}$ and cubic particles of about 1000${\AA}$. The products were constructed of superparamagnetic and ferromagnetic particles, and Magnetization were about 30 emu/g. Air Oxidation, Above 6 hr Air 120 ι/hr and 4 hr of Air 180 ι/hr were uniform cubic particles of above 1000${\AA}$. The products were ferromagnetic particles and Magnetization of above 45 emu/g.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1404-1409
• /
• 2007

Polymers for laser sintering were needed in order to fabricate the articles with the three-dimensional duplication equipment of SLS (selective laser sintering) process. The thermal properties, particle size, distribution, and shape of polymer powder had a close relation with the processibility of laser sintering. In this study, we prepared new polymer powders with uniform size and higher bulk density by wet process. Wet process consists of several finely-controlled steps such as dissolution, nucleation, propagation and crystallization. Several additives were added to improve the thermal, rheological, and flow properties.

• 한국분말재료학회지
• /
• 제12권4호
• /
• pp.284-290
• /
• 2005

ZnO nanostructures with various shapes were synthesized under ambient pressure condition by a wet chemical reaction method. Nanorods of ZnO with hexagonal cross-section and their aggregates with radiate shape were synthesized. Precursor concentration affected considerably the shape evolution of ZnO nanorods. Low precursor concentration was proved to be more preferable to the growth of ZnO nanorods, which is attributed to the intrinsic characteristics of chemical reaction in the synthesis of ZnO from zinc compounds.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.953-955
• /
• 2006

In this work we compared different sources of composition of Ag powders obtained by dry and wet process on the photolithographic patterning of PDP electrode and resistance of sintered Ag electrode. It was found that 90 : 10 wt% ratio of Ag powder made by dry and wet processes gave optimum result both on the PDP electrode pattern and resistance of PDP electrode after sintering.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.117-118
• /
• 2011

South Korea is a ninth greenhouse gas emission nation in the world(2007) and is certainly to perform a duty to conduct reduction role by the Kyoto Protocol in 2013. waste concrete produced in the country is 45 million tons per year and these two issues are being came to the fore as major problems of society. However, if it utilizes wet carbonation system carbon using carbon dioxide and waste concrete as raw material it can expect effect of environmental protection and resource recycling. Furthermore, it can exploit another industry production.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.27-32
• /
• 1986

This study is aimed at synthsizing high dielectric material (Ba, Sr)$TiO_3$ through direct wet process. Pure and ultra fine particle of (Ba, Sr)$TiO_3$ Powder was synthesized from $BaCl_2$ $SrCl_2$ and TiCl4 aqeous solution at KOH Solution in the $N_2$ gas atmosphere. $BaCl_2$ $SrCl_2$ and TiCl4 were Mixed with the mole ratio of 1:9, 3:7:10, 5:5:10, 7:3:10, 9:1:10 and sythesized at 4$0^{\circ}C$~9$0^{\circ}C$ for 10min~15hrs. The particle size particle shape crystallinity and synthesis condition of (Ba, Sr)$TiO_3$ powder with the variation of temperature and reaction time in the aqueous solution studied by the exprimental instruments of DTA. TGA, X-ray diffratometer SEM.

• 한국분말재료학회지
• /
• 제12권3호
• /
• pp.192-200
• /
• 2005

Ultrafine copper powder was prepared from $CuO-H_2O$ slurry with hydrazine, a reductant, under $70^{\circ}C$. The influence of various reaction parameters such as temperature, reaction time, molar ratio of $N_2H_4$, PvP and NaOH to Cu in aqueous solution had been studied on the morphology and powder phase of Cu powders obtained. The production ratio of Cu from CuO was increased with the ratio of $N_2H_4/Cu$ and the temperature. When the ratio of $N_2H_4/Cu$ was higher than 2.5 and the temperature was higher than $60^{\circ}C$, CuO was completely reduced into Cu within 40 min. The crystalline size of Cu obtained became fine as the temperature increase, whereas the aggregation degree of particles was increased with the reaction time. The morphology of Cu powder depended on that of the precursor of CuO and processing conditions. The average particle size was about $0.5{\mu}m$.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 추계학술발표회요약집
• /
• pp.222.2-222
• /
• 2001

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.180-180
• /
• 2002