• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.74-84
• /
• 2009

본 연구에서는 생산방식에 따라 생산된 고품질 순환모래의 기초물성평가를 통한 품질특성을 실험 실증적으로 평가함으로서, 최종 생산된 순환모래에 대한 성능을 평가하고, 목표 품질의 달성과 향후 성능 보완 및 활용의 확대, 고부가가치 창출을 위한 기초자료를 제시하고자 하였으며, 본 연구의 기초물성 실험결과, 직렬식 건식생산시스템과 병렬식, 소용량 습식생산시스템과 대용량을 거쳐 최종 생산된 순환모래인 RS-IV의 경우 절대건조밀도, 0.08mm체 통과량, 점토덩어리량, 유기이물질함유량에서 KS F 2573(순환잔골재) 기준에 만족하였으나, 흡수율에서는 대 소용량 습식생산시스템을 거쳐 최종 생산된 RS-IV만이 KS F 2573 기준치 5% 이하에 만족하였다. 흡수율의 품질 개선율 경우, 직렬식 건식생산시스템(7.13%), 병렬식(19.89%), 소용량 습식생산시스템(27.41%), 대용량(54.56%), 0.08mm체 통과량 경우, 직렬식 건식생산시스템(22.22%), 병렬식(39.92%), 소용량 습식생산시스템(91.89%), 대용량(98.16%), 점토덩어리량 경우, 직렬식 건식생산시스템(50.34%), 병렬식(76.77%), 소용량 습식생산시스템(98.60%), 대용량(99.32%)등으로 직렬식 건식생산시스템에 비하여 병렬식, 소용량 습식생산시스템에 비하여 대용량, 건식생산시스템에 비하여 습식생산시스템의 품질 개선율이 우수한 것으로 나타났다.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.256-262
• /
• 2015

This study has an innovative improvement of the ocher tiles production system that aims to resolve social issue of industrial waste and to meet the customer needs for environmental-friendly building materials. By changing a wet type cutting method to a dry type of ocher tiles production system, the three processes such as cleaning, dehydration, and drying can be removed in existing overall process of 17 steps. Accordingly, the application of the wet type cutting method, which is proposed in this study, makes an increase in ocher tiles production from 1,500 to 1,850 pieces per hour. In particular, industrial wastewater that was emerging as the biggest problem in environmental pollutants in the wet cutting method has been removed. In addition, the most serious problems of noise and dust from the operator side, while developing a device for the dry cutting method, are eliminated through the development of additional equipment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.103-107
• /
• 2008

This study was to execute the experiment for analyzing the quality characteristics of mortar by type of recycled sand by using the recycled sand produced by the manufacturing system by wet gravity separation in order to develop the removal device of impurities for the production of high-quality recycled sand. As a result, this study has sown that the mortar using the high-quality recycled sand through the manufacturing system by wet gravity separation in the fluidity property, strength property, and shrinkage property largely, compared with the mortar using low-quality recycled sand that not passed the device of sand flux. There was a tendency similar to the plane mortar. In conclusion, it was considered as various quality performances of the recycled sand were improved through the production stage of prototype.

• 한국기계가공학회지
• /
• 제3권4호
• /
• pp.29-36
• /
• 2004

An experimental study on drilling of stainless steel is conducted using TiAlN coated drills and HSS twist drills with several cutting conditions; feed rate, spindle rotational speed, and dry/wet cutting. The effects of number of hole on the thrust force are examined by cutting force measurement. The flank wear of the drills and the change of hole diameter are quantitatively observed using a vision system. It is found that the thrust force in drilling with TiAlN coated drills decrease under dry and wet machining, whereas the flank wear resistance is improved.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.91-96
• /
• 2017

In this computational study of optical fiber manufacturing, WOW (wet-on-wet) double coating process on freshly drawn glass fiber has been numerical modelled and simulated using a simplified geometry of typical optical fiber coating apparatus. The numerical domain includes primary and secondary coating dies along with secondary coating cup and the interface between primary and secondary coating liquids are investigated using level set method. Coating liquid viscosity is an important parameter and its dependence on temperature is also considered. Since there would be possibility for pressure and temperature of primary coating liquid to be increased substantially at high fiber drawing speed, the effects of increased pressure and temperature of primary coating liquid are examined on flow patterns of coating liquids in secondary coating cup. In case that both pressure and temperature of primary coating liquid are high enough, liquid interface becomes noticeably unstable and this flow instability could adversely affect the uniform coatings and final quality of produced optical fiber.

• 청정기술
• /
• 제24권4호
• /
• pp.269-274
• /
• 2018

본 연구에서는 물티슈 제조공정에 대한 전과정평가를 수행하였다. 물티슈 제조공정은 약액을 조제하여 부직포 원단에 투여하고 포장하는 단계로 이루어진다. 특정 업체의 실제 공정을 대상으로 투입 산출물 데이터를 수집하였고, 환경부와 해외 LCI DB를 활용하여 상 하위 흐름을 연결하여 이 공정에 대한 잠재적인 환경영향을 산출하였다. 특성화 결과, 오존층파괴 3.46.E-06 kg $CFC_{11}$, 산성화 5.11.E-01 kg $SO_2$, 자원고갈 $3.52.E+00\;1yr^{-1}$, 지구온난화 1.04.E+02 kg $CO_2$, 부영양화 2.31.E-02 kg ${PO_4}^{3-}$, 광화학산화물생성 2.22.E-02 kg $C_2H_4$, 인간독성 1.55.E+00 kg 1,4 DCB, 생태독성 5.82.E-04 kg 1,4 DCB로 나타났다. 일반적으로 제조공정의 환경영향을 줄이기 위해 공정을 개선하거나 환경영향이 적은 원자재와 포장재로 변경하는 등의 방법이 있다. LCA 결과, 공정에 사용되는 에너지가 주요이슈로 도출되었기 때문에 에너지 효율을 개선한 공정시스템 설계나 환경영향이 낮은 에너지원으로 변경하는 등의 방안이 필요하다. LCA의 특성상 이 연구결과는 사용된 LCI DB 종류에 따라 달라질 수 있고 모든 물티슈 제조공정을 대표할 수 없다.

• 한국광학회지
• /
• 제18권6호
• /
• pp.395-400
• /
• 2007

본 연구는 지문 인식 시스템 중에서 프리즘을 이용한 광학계의 설계에 대한 것이다. 이는 프리즘, 렌즈, 그리고 CMOS 이미지 센서(혹은 CCD) 등으로 구성되어 있는 광학계이다. 종래의 프리즘을 이용한 지문인식 광학계에서는 지문에 물이 묻어 있는 경우에 영상의 품질이 현저히 저하되는 문제점이 있다. 이 경우에 프리즘의 굴절률을 높임으로써 영상의 품질을 충분히 높일 수 있었다. 또한 프리즘과 렌즈를 사용함으로 인하여 발생하는 비대칭 축소 왜곡(anamorphic distortion)과 상면의 지를 최소화되는 프리즘 꼭지각 $\alpha$를 제안한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.339-340
• /
• 2009

본 연구에서는 습식비중분리시스템에서 생산된 순환모래의 생산단계별 모르타르의 품질특성을 검토한 결과 습식비중분리시스템을 거친 후 단계의 고품질 순환모래(RS-IV)가 품질성능이 크게 개선되는 경향을 나타내었다.

• 한국대기환경학회지
• /
• 제23권6호
• /
• pp.744-751
• /
• 2007

Wet scrubber is widely used to remove toxic gaseous contaminants in various industries such as semi-conductor industry, display manufacturing industry and so on. In this study, to optimize a packed bed scrubber as one of typical wet scrubber size while keeping its performance, four different packing materials were investigated at different air flow rates, liquid-gas ratios and pH values. Ammonia, hydrochloric acid and hydrofluoric acid were used as test gases to characterize the scrubber performance. Gas removal efficiency increased as the packing size decreased, which resulted in the increase of specific surface area. The increase of air flow rate led to the decrease of gas removal efficiency, while the increase of liquid-gas ratio led to the increase of gas removal efficiency. For the case of $NH_3$ gas, lower pH, and for the cases of HCl and HF, higher pH contributed to higher gas removal efficiency. Gas removal efficiency of a wet scrubber increased in the order of HCl < $NH_3$ < HF according to its water solubility.

• 펄프종이기술
• /
• 제35권2호
• /
• pp.26-32
• /
• 2003

For the purpose of manufacturing water-resistant corrugated board boxes for agricultural products in the cold chain system, the effects of fiber types, wet strength agents and a moisture-proof chemical on the properties of the base papers were investigated first. PAE(polyamide amine epichlorohydrin) showed better performance than MF(melamine formalde-hyde) over broad stock pH ranges, which was prefered as wet strength agent for the paper grade. When short fibers(AOCC, KOCC) were mixed with long fiber(UKP) in certain ratios, some physical properties of the paper made with mixed fibers were similar to those of the paper made with UKP only. Paper containing AOCC showed the biggest increase in water resistance when PAE was added to the stock. Synergistic effects in moisture-proof and some mechanical properties of paper were appeared when PAR was added internally, together with the coating of a moisture proof chemical on the sheets.