• Nuclear Engineering and Technology
• /
• 제33권4호
• /
• pp.355-364
• /
• 2001

In order to evaluate and finally optimize the vitrification condition for combustible dry active waste (DAW), dust and gas generation characteristics were investigated for PE, cellulose, and mixed waste Tests were conducted by varying the operation variables such as melter configuration, excess oxygen amount, and waste feeding rate. Results showed that dust generation characteristics were affected by the operation parameters and the melter＇s configuration is the dominant one. For all tested DAWs, dust generation was reduced by increasing the waste feeding rate and the excessive oxygen amount in the melter. Among waste types, dust amount was decreased by the order of mixed wastes, PE, and cellulose. Other parameters such as temperature variation and operation time have also affected the dust generation. The optimum condition for the DAW vitrification was determined as the melter＇s configuration equipped for minimizing the waste dispersion with 20 kg/h of waste feeding rate and 100% of excessive oxygen supply. CO gas concentration in the off-gas was immediately influenced by the combustion state in the melter, but showed similar trend as the dust generation. For the NOx production during the vitrification process, thermal NOx, which is generated from the Post Combustion Chamber (PCC), rather than fuel NOx was assumed to be dominant. The gas cleaning of efficiencies of the PCC, wet scrubber, and Selective Catalytic Reduction system (SCR) were found to be high enough to keep the concentration of pollutants (CO, NOx, SOx, HCI) in the stack below their relevant emission limits.

• ETRI Journal
• /
• 제16권1호
• /
• pp.45-57
• /
• 1994

The effects of reactive ion etching (RIE) of $SiO_2$ layer in $CHF_3/C_2F_6$ on the underlying Si surface have been studied by X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometer, Rutherford backscattering spectroscopy, and high resolution transmission electron microscopy. We found that two distinguishable modified layers are formed by RIE : (i) a uniform residue surface layer of 4 nm thickness composed entirely of carbon, fluorine, oxygen, and hydrogen with 9 different kinds of chemical bonds and (ii) a contaminated silicon layer of about 50 nm thickness with carbon and fluorine atoms without any observable crystalline defects. To search the removal condition of the silicon surface residue, we monitored the changes of surface compositions for the etched silicon after various post treatments as rapid thermal anneal, $O_2$, $NF_3$, $SF_6$, and $Cl_2$ plasma treatments. XPS analysis revealed that $NF_3$ treatment is most effective. With 10 seconds exposure to $NF_3$ plasma, the fluorocarbon residue film decomposes. The remained fluorine completely disappears after the following wet cleaning.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.86-86
• /
• 2010

Micro- and nanoscale texturing and control of surface energy have been considered for superhydrophobicity on polymer and silicon. However these surfaces have been reported to be difficult to meet the robustness and transparency requirements for further applications, from self cleaning windows to biochip technology. Here we provided a novel method to fabricate a nearly superhydrophobic soda-lime glass using two-step method. The first step involved wet etching process to fabricate micro-sale patterns on soda-lime glass. The second step involved application of $SiO_x$-incorporated DLC to generate high intrinsic contact angle on the surface using chemical vapor deposition (CVD) process. To investigate the effect of surface roughness, we used both positive and negative micro-scale patterns on soda-limeglass, which is relatively hard for surface texturing in comparison to quartz or Pyrex glasses due to the presence of impurities, but cheaper. For all samples we tested the static wetting angle and transparency before and after 100 cycles of wear test using woolen steel. The surface morphology is observed using optical and scanning electron microscope (SEM). The results shows that negative patterns had a greater wear resistance while the hydrophobicity was best achieved using positive patterns having static contact angle up to 140 deg. with about 80% transparency. The overall experiment shows that positive patterns at etching time of 1 min shows the optimum transparency and hydrophobicity. The optimization of micro-scale pattern to achieve a robust, transparent, superhydrophobic soda-lime glass will be further investigated in the future works.

• International journal of advanced smart convergence
• /
• 제8권3호
• /
• pp.27-38
• /
• 2019

I reviewed about dyeing fastness and functional properties of the non-mordant dyed cotton and iron mordant dyed cotton with astringent persimmon juice. In the UV-VIS spectrum of astringent persimmon juice, the maximum absorption wavelength of the juice was 272.0 nm, which was a characteristic peak of tannin. In dyeing fastness, light fastness of the non-mordant dyed cotton was a little low at grade 2~3. But by the iron mordant treatment, the light fastness was good at grade 4. Dry cleaning fastness to discoloration and contamination was excellent at grade 4~5 for both the non-mordant dyed cotton and iron-mordant dyed cotton. Their rub fastness were grade 3 and grade 2~3 respectively, in the dry condition, and grade 2~3 and grade 3 respectively, in the wet condition. In the perspiration fastness of the non-mordant dyed cotton, the discoloration from acidity and alkalinity was grade 3~4 and grade 3, respectively, and contamination from acidity and alkalinity was relatively good at grade 4. Meanwhile, in the perspiration fastness of the non-mordant dyed cotton, discoloration from acidity and alkalinity was fair, both recording grade 3~4, and contamination from acidity and alkalinity was very good, both recording grade 4~5. In the ultraviolet protection effect of the non-mordant dyed cotton and iron-mordant dyed cotton, the ultraviolet protection factor was both 50+, both of which showed an excellent ultraviolet blocking effect. And the protection rate of UV-A appeared 98.4% and 99.1%, respectively, and the protection rate of UV-B showed 98.7% and 99.2, respectively. In addition, both exhibited an excellent deodorization rate over 99.9% or more, irrespective of the passage of time. Also, both showed an excellent antimicrobial activity over 99.9% or more against Staphylococcus aureus and Klebsiella pneumoniae.

• 한국의류학회지
• /
• 제45권3호
• /
• pp.409-422
• /
• 2021

A doctor's coat worn by Seo Jae-pil (1864-1951)-National Registered Cultural Heritage No. 607-was conserved with wet cleaning to remove thick wrinkles and brown stains that had been present for a long time. This paper also applied microscopic observation and infrared spectrophotometric analysis to obtain scientific investigation data on the cotton fabric of this doctor's coat. Information about Seo Jae-pil's time as a doctor, the process of changing his English name, and C.D.Williams & Co., which produced the medical coat, revealed that this doctor's coat was worn by Seo Jae-pil between 1892 and 1898 or 1926 and 1939. Additionally, this paper proposes a pad for filling relics that can protect the shape of modern and contemporary clothing, such as Seo Jae-pil's doctor's coat, for display at a museum site. Specifically, this research provides detailed information on the manufacturing of filling pads that can prevent damage to modern and contemporary jackets and coats so that they can be used in the cultural heritage field by developing filling materials for three-dimensional costume artifacts.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.256-273
• /
• 2023

Among the dyeing industries, the tenter process is a process that improves the quality of fibers by drying and ironing (heat treatment) dyed fabrics, and drugs such as water repellents, antistatic agents, and fiber softeners are mainly used in these tenter processes. These drugs are vaporized in the process of treatment by high temperatures (180 ~ 230℃), and are observed in a complex form such as white smoke, oil mist, and fine dust, causing odor. To treat the complex exhaust gas at the rear end of the tenter facility, most companies operate by installing a wet scrubber and an adsorption tower alone or in parallel, but there are many problems. In particular, the insoluble oil mist at the rear end of the tenter has significantly low processing efficiency in the cleaning dust collection facility, and there is a problem in the facility by adsorption due to the occlusion phenomenon caused by the oil mist. In addition, the odor gas at the rear end of the tenter contains a lot of aldehydes, and in order to improve these various problems, a complex exhaust purification device using cyclone and electric support collector was developed. This study examined the applicability of economical and efficient technology by removing complex air pollution at the rear end of the tenter and applying improved technology than the existing technology.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.

• 자원환경지질
• /
• 제40권5호
• /
• pp.661-673
• /
• 2007

안성 청룡사삼층석탑의 구성암석은 대부분 편마상 복운모 화강암과 세립질 화강암으로 이루어져 있다. 이 석탑은 거의 전면에 걸쳐 나타나는 부재의 균열과 결실이 탑의 구조안정성을 위협한다. 또한 표면의 무기오염물과 다양한 서식형태를 갖는 생물침해는 석재표면의 손상을 가중시키고 있다. 따라서 이 연구에서는 석탑에 대한 종합적인 비파괴훼손도 진단을 수행하고 이를 근거로 풍화를 저감시키기 위해 최소한의 보존처리를 수행하였다. 보존처리에서는 석탑의 전면에 걸쳐 자생하는 지의류 및 생물오염물을 건식 및 습식 세정하였으며, 과거 이 석탑의 보수에 사용되었던 노화된 콘크리트를 제거하고 합성수지를 이용하여 복원하였다. 부재사이에 삽입된 부식된 철편은 티타늄 강철 합금으로 교체하였으며, 모든 공정이 완료된 후에 석질 강화처리를 실시하였다. 또한 석탑의 지반과 주위환경을 보강하고 정비하였으며 관람객에 의한 손상을 제어하기 위한 보호시설을 설치하였다.

• 박물관보존과학
• /
• 제27권
• /
• pp.103-124
• /
• 2022

부여 장하리 삼층석탑의 연구는 석탑 부재에 대한 물성 평가를 수행하여 석탑의 현재 상태를 객관적으로 파악하고 석조문화재의 훼손에 적합한 보존처리 방안을 수행하기 위해 실시하였다. 평균 전암대자율 값은 3.71(10^-3 SI unit)로 나타났고, 석탑 부재는 최소 4종류의 화강암으로 분류되며, 동일한 기원을 가지지 않은 것으로 판단된다. 초음파 속도는 평균 1,519m/s로 풍화 지수를 환산한 결과 평균 4등급으로 나타났고, 열화상 측정을 통해 시멘트 부재와 원 부재의 열적 구배를 확인하였으며, 부분적으로 원암과 비슷한 신석으로 교체되어야 할 것으로 사료된다. 과학적 조사를 바탕으로 풍화 훼손 지도를 작성하고, 선행연구를 통해 적합한 보존처리 방안을 수립하였다. 생물피해와 변색이 심하여 증류수와 브러쉬를 이용한 습식세척을 실시하여 표면의 오염물을 제거하였으며, 박리가 되는 부분을 에폭시 수지와 동질의 석분을 현장에서 제작하여 혼합한 후 보강하였다.

• 박물관보존과학
• /
• 제27권
• /
• pp.125-146
• /
• 2022

동국대학교 박물관 소장 보타전명 목조감실은 조선후기 목조 건축 양식으로 제작한 목조감실이다. 목조감실 안료의 박락, 부재의 탈락 등 손상이 확인되어 보존처리를 진행하였다. 보존처리 전 손상형태와 유형을 분류하고, 과학적 분석(수종 분석, 섬유 동정, 안료의 성분분석(P-XRF))를 실시하였다. 분석 결과, 제작에 사용된 목재는 주로 잣나무류, 현판은 가래나무속, 섬유는 벼섬유로 식별되었다. P-XRF 결과, 백색 안료는 연백과 아연화, 적색안료는 장단, 청색안료는 울트라 마린 블루, 녹색 안료는 에메랄드 그린으로 확인하였다. 목조감실의 보존처리는 건식·습식세척으로 고착된 오염물을 제거한 후 탈락한 부재들을 위치에 맞게 접합하고, 일부 결손부를 복원하였다.