• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.39-45
• /
• 2014

Today, the development of digitized information media and info-communications are bringing many changes. Due to the development of IT thechnology, we can learn wherever, whenever, regardless of time and place. Machine drawing subject is a very important in mechanical engineering course, but it's studyed only basic theory in a short period, average 1~2weeks. So that, students think that the mechanical drawing is of minor importance. Such ideas make them difficult to impove sense of space in isometric drawing and drawing skill. Therefore, in this paper, augmented reality-based contents through the system, Mechanical Drawing of education to meet the effectiveness and satisfaction, student learning can be spontaneously it was construct self-system. And, Theoretical part of the Mechanical Drawing is proposed ensure more efficient and easier training. In this paper, we were test operation for user effectualness of proposed service at Korea Polytechnics Colleges a industrial facilities management in Daegu. Target user are 66 students, and The students were divided into experimental group and comparison group. Experimental results, experimental group was able to do systematically experience many Projection Drawing and Pictorial Drawing in short schooltime. And, The test operation results showed that have the possibility to meet education effectiveness and user satisfaction in this augmented reality-based contents system.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.3 s.51
• /
• pp.551-562
• /
• 1995

To assess the status of safety accidents, authors reviewed and analysed the records of safety accidents of a welding material manufacturing factory at Pohang city from January 1989 to December 1993. The results are; 1. The total incidence of safety accidents was 295 spells for five years. 2. Average age of workers with accident was 35.7 years. Average duration of employment was 6.2 years and the duration of employment increased as the year increased. 3. There was no statistical significance on season, month, weekday and time by year in the incidence of safety accidents. The most frequent part of body injured was upper extremities and the most frequent type of injury was abrasion. 4. Mean admission rate of safety accidents was 12.6% and the ratio of treated spells as occupational injury was 7.8%. 5. The most frequent cause of injury was worker's mistake and the most frequent action for the prevention of further accidents was safety education. 6. The incidence rate of safety accidents on 1993 was 116.2 spells per 1,000 persons. Above results suggest that to prevent safety accidents, safety education should be done continuously, the environmental and human factors were controlled and more exact reporting system of safety accidents was needed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.1
• /
• pp.84-90
• /
• 2007

This paper was studied on the electrochemical corrosion characteristics of weld zone for refrigerating and heating systems pipe. Austenitic stainless steel is widely applied to various fields of industry, because it is good to corrosion resistance and mechanical properties. But STS 304 is reliable to sensitization by heat cycle on welding. Therefore, in this study, electrochemical polarization test of STS 304 steel pipe manufactured by arc welding in tap water was carried out. And then polarization resistance behavior, uniform and local corrosion behaviors of base metal(BM), weld metal(WM) and heat affected zone(HAZ) for STS 304 pipe were investigated. The corrosion current density of STS 304 steel pipe is high in order of BM(153nA/cm2) < WM(614nA/cm2) < HAZ ($1.675{\mu}A/cm2$). The pitting potential of HAZ(238mV/SCE) for STS 304 is lower than BM(1206mV/SCE) and WM(369mV/SCE). Therefore, the local corrosion like pitting corrosion, galvanic corrosion and crevice corrosion of HAZ for STS 304 is more sensitive than BM and WM.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.76-81
• /
• 2020

Recently, fire and explosion accidents caused by sparks scattered during welding and melting work in the work place where flammables are present. The causes of such fire accidents are mostly non-compliance with basic safety rules such as the removal of hazardous goods and the prevention of sparks scattering. It is strongly recommended to revise Industrial Safety and Health Act. This study analyzes the fire and explosion accidents in the work of firearms, such as welding and melting work, and analyzes the causes from a system perspective, and proposes an improvement plan for the system such as expanding the number of fire monitors, pre-approval of fire risk work, and intensifying fire prevention safety education.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.3
• /
• pp.233-242
• /
• 2013

This paper reports a new beam-to-column connection that is suitable for use in the weak axis of a column. The proposed system mainly uses bolts, and it minimizes the use of welding, which is generally difficult to perform onsite. In this system, a H-shape steel beam is joined to a H-shape steel column by bolted splices at the top flange and without a scallop at the web. The structural performance of the proposed connection was verified through full-scale tests of nine specimens, taking into account the effects of the geometry and arrangement of the plate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.535-541
• /
• 2020

FCAW is used mainly in the welding of carbon steel and alloy steel because it can be welded in all positions and can obtain excellent quality at sites with variable working conditions. Recently, many studies in Korea have estimated the fatigue strength, residual stress, and deformation, and to develop a fillet welding process. On the other hand, there have been few studies of the mechanical properties based on the strength, macro and magnetic particle test results for fillet welding. This study shows the following results through fillet welding, macro testing and strength testing using SM490A (solid-structure rolled steel) for thick plates using SS400 (rolled steel) for the upper plate and FCAW. The hardness test, macro test and magnetic particle test were then conducted. The hardness tests showed that all result values were smaller than the KS B 0893 standard values of 350Hv. The macro-test showed that each type of welded part was in a normal organic state and that there were no internal errors, bubbles, or impurities on the front of the welded part. Therefore, there were no concerns about lamination. The magnetic particle examination showed no problems.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.39-39
• /
• 2009

고강도강의 용접성은 저온균열 저항성으로 대변되는데, TMCP강과 HSLA강 등이 개발되면서 고강도강의 저온균열저항성이 크게 향상되어 무예열 용접성이 확보되었다. 그러나 용접재료 측면에서는 그에 상응하는 재료의 개발이 지연되어 용착금속부에서의 저온균열이 심각한 문제로 대두되고 있는 실정이다. 이러한 문제는 800 MPa급인 HY-100강재를 HSLA-100강으로 대체하는 과정에서 현실적인 문제로 제기 되었다. 즉 HSLA강은 용접 예열이 필요치 않았으나 기존의 용접재료, 즉 HY-100 강재에 사용하던 용접재료를 사용하게 되면 용착금속부에서 저온균열이 발생하여 용접예열을 생략할 수 없다는 판단에 이르게 되었던 것이다. 이에 본 연구의 목적은 HSLA-100강을 무예열 용접할 수 있는 GMA 용접와이어 개발하는 것이며, 구체적인 개발 목표는 무예열 용접조건에서 800 MPa 이상의 인장강도를 가지며 $-50^{\circ}C$에서의 충격인성이 50 J 이상인 GMA 용접와이어 개발하는 것이다. 이러한 용접재료를 합금설계함에 있어 무예열 용접성을 확보하기 위하여 용접재료의 탄소함량을 0.01% 수준으로 하고, 용착금속의 인장강도와 저온 충격치에 미치는 Mn과 Mo 함량의 영향을 검토하고 각각의 조성을 실험계획법으로 확정하였다. 그리고 확산성수소량에 따른 저온균열 발생 여부를 확인하여 무예열용접성을 확보하기 위해서는 확산성수소량이 3ml/100g 이하가 되어야 한다는 사실을 실험적으로 확인하였다. 그리고 이를 달성하기 위해서는 원자재인 와이어로드의 표면 품질이 중요하다는 사실도 확인할 수 있었다. 다음으로는 실험계획법에 의거하여 선정된 합금조성의 신뢰성을 검증하기 위하여 800kg 중량의 시제품을 생산하였으며, 생산된 시제품에 대해서는 실험계획법에서 사용한 Ar+5%CO2외에도 Ar+20%CO2를 적용하여 보호가스의 영향을 검토하였다. 검토 과정에서 Ar+20%CO2용으로 사용하기 위해서는 용접재료의 Si 및 Mn 함량이 상향조정되어야 함을 확인할 수 있었다. 그리고 탄소함량을 0.05% 수준으로 증가시키면 Mo 함량을 크게 저하시킬 수 있음도 확인할 수 있었다. 이러한 과정을 거쳐 개발된 GMA 용접재료는 무예열 용접조건에서 저온균열이 발생하지 않았으며, 인장강도는 830 MPa이었으며 $-50^{\circ}C$에서의 충격치는 90 J 이상이었다.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.310-316
• /
• 2010

Recently a fuel oil of the diesel engine of the marine ship is being changed with heavy oil of low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine such as cylinder liner, piston crown, spindle and seat ring of exhaust valves are predominantly increased. In particular the degree of wear and corrosion of piston crown is more seriously compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weldment of the piston crown is a unique method to prolong the its life in a economical point of view. In this case, filler metals having a high corrosion and wear resistance such as stellite 6, Inconel 625 and Inconel 718 are mainly being used for repair welding. However it has been often happened that piston crown on the ship,s job site is being actually inevitably welded with mild filler metals. Therefore in this study, filler metals such as E4301, E4313 and E4316 were welded at SS401 steel as the base metal, and corrosion property of their weld metals in the case of post weld heat treatment or not was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 0.1% $H_2SO_4$ solution. Corrosion resistance of the weld metal of E4301 was better than the other weld metals in the case of no heat treatment, however, its resistance was considerably decreased with post weld heat treatment(annealing:$625^{\circ}C$, 2 hr) compared to other weld metals. The weld metals of E4313 and E4316 showed a relatively good corrosion resistance by post weld heat treatment.

• Journal of Fisheries and Marine Sciences Education
• /
• v.12 no.1
• /
• pp.22-82
• /
• 2000

The ship hull construction materials of fishing boat has changed in order that wooden, steel, and fiber glass reinforced plastic(FRP). The fishing boat made from FRP has increased every year because that materials has proved excellent of the characteries for fishing boats construction members. Recently, FRP tend towards evasion for the pollution of air enviroment. Therefore. the materials of fishing boat construction must be exchanged by another one. Aluminium alloys must be recommended for fishing boats construction mateials because that is light weight and corrosion resisting in the sea water. Regulation of the standard of ship hull construction for aluminium alloys fishing boats did not enact laws in the interior now. Therefore, this regulation was studied by the following items. that is Rudder, Bottom construction, Side hull plate construction, Deck plate construction, piller. Water tight bulkhead, Deep tank, Fish tank, Stern construction, Superstructure, Deck house construction, Hatch, Engine room opening, Hatch opening, Bulwark, Welding and Rivet etc. A study on the regulation will be contributed to enact laws for fishing boat construction of aluminium alloys.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.415-423
• /
• 1995

A welded tuff with a near-vertical parataxitic fabric crops out as an elliptical shape($500{\times}350m$) in horizontal section, the Geumseongsan volcanic field. It intrudes the Cretaceous sedimentary rocks of the upper Hayang Group, surge tuff and rhyolite of the Geumseongsan volcanic complex. Generally it displays an ubiquitous, steeply inward-dipping welding foliation, subparallel to the margins of the intrusion, and a subvertically inward-inclined lineation defined by extremely stretched fiammes on the welding foliation plane. These fabrics suggest its overall form may be of an inverted cone-shaped plug representing a flared vent that served as a feeder for extrusive welded ash-flow tuff sheets.