• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.61-68
• /
• 2013

Laser welding is widely used in the industry for the advantage of small heat affected zone and short weld process time. Conduction limit welding can be used to modify the surface characteristic and it is important to identify the heat affecting area correctly for the improvement of manufacturing accuracy. Since time and length scale associated with laser welding process are extremely small, numerical study can be a useful tool. In this study, two-dimensional axi-symmetric version of energy equation with enthalpy method has been used to analyze the effect of laser input conditions on final shape by the laser welding process. The proposed numerical procedure has been benchmarked with several experimental results and compared well. The modified Marangoni and Peclet number have been introduced using controllable input variables. Simple parametric researches have been performed for high Pr number material. The results show that higher Marangoni number increase fluid mixing, thus generating convex type weld pool. On the other hand, the width of the weld pool is proportional to Peclet number.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.360-360
• /
• 2011

In this work, SUS310S used for valve plate assembly was electron beam (EB) welded to determine the influence of the parametric conditions on the characteristics of the weld and to minimize porosity and micro-fissures among others. The evolution in the weld geometry and microstructure was examined as a function of the process conditions such as beam current and focusing current under a constant welding speed and accelerating voltage. The integrity of the EB welds in SUS310S was examined for defects (e.g. cracking, porosity, etc.), adequate penetration depth, and tolerable weld width deviation for the various welding conditions. Optical microscopy (OM), x-ray photoelectron spectroscopy analysis (XPS), scanning electron microscopy (SEM) and 3D micro-computed tomography (Micro-CT) for the cross section analysis of the electron beam welded SUS310S were utilized. The tensile strength and hardness were analyzed for the mechanical properties of the EB weld. At the 6 kV accelerating voltage, it was determined that a satisfactory penetration depth and desirable weld width deviation requires a beam current of 30 mA and a focusing current of 0.687 A at the welding speed of 25 mm/sec.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.275-277
• /
• 2004

Fictitious notch radius approach is based on the Neuter's microstructural support hypothesis which assumes that fatigue crack is governed by highly stressed volume of the material right on the weld toe area rather than the surface stress at a pin point of weld toe area. Variety of successes have been achieved in applying this methodology to the fatigue of welded joint, hence, it became one of recommended design procedure in IIW's recommendation as well as many ship classification societies. 1mm fictitious notch radius approach was applied to the various fatigue problems of welded joints in this study covering the effect of weld size, notch stress calculation for 3D geometry and low cycle fatigue problem. It was found that fictitious notch radius approach fumed out to be very effective and accurate in dealing with fatigue strength of welded joint.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.113-120
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.116-124
• /
• 1995

This paper presents an analytical solution to predict the transient temperature distribution in fillet arc welding including the effect of molten metal. The solution is obtained by solving a transient three-dimensional heat conduction equation with convection boundary conditions on the surfaces of a plate, and mapping the infinite plate onto the fillet weld geometry with energy equation. The electric heat input on the fillet weld and on the infinite plate is assumed to have a combination of two bivariate Gaussian distribution. To check the validity of the solution. FCA welding experiments were performed under various welding conditions. The actual isotherms of the weldment cross-sections at various distances from the arc start point are compared with those of simulation result.

• 한국레이저가공학회지
• /
• 제3권3호
• /
• pp.31-37
• /
• 2000

In this paper, the possibilities of the laser overlap spot welding were studied to utilize the advantageous properties of amorphous metal foils. In order to estimate the usage of amorphous metals foils as structural members, the tensile shear strength and the fracture features were investigated. Although the crystalline zone on the surface was formed, it was not the direct cause of the fracture of the weld. The fracture of the weld resulted from the geometry discontinuity between the workpiece and the protrusion zone, which was formed during the weld process. The vein pattern - the typical feature of the fracture of the amorphous metal - was formed on the fracture surface. The tensile shear stress was reached to 1200 N/㎟ (2-foils overlap welding) and 900 N/㎟ (10-foils overlap welding), whereas the tensile strength of the workpiece was 1500-2000 N/㎟.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.133-141
• /
• 1996

하중 전달형 필릿 용접 이음부에서 피로파괴는 용접투우부와 용접루트부로 부터 발생된 피로균열 발생 및 전파의 특성에 지배된다. 또한 그 피로균열의 특성은 필릿의 형상과 응력범위에 따라 큰 영향을 받는다. 본 연구의 목적은 하중 전달형 십자형 필릿 용접 이음부에서 피로하중 작용시 용접토우부에서 파괴하기 이한 용접부의 임계다리길이와 응력범위등을 검토하는 것이다.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.33-39
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• 한국정보통신학회논문지
• /
• 제10권7호
• /
• pp.1326-1331
• /
• 2006

일반적으로 용접 Root 캡은 여러 가지 용접 결함들 중에 용접 품질을 저하시키는 중요한 요인 중의 하나이다. Gas metal arc welding (GMAW)에서 root 갭은 용접 전류, 아크 전압, 용적률 등과 같은 여러 가지 용접 파라미터들에 영향을 미친다. 그러나 용접 공정의 비선형성 때문에 root 갭과 많은 용접 파라미터들 사이의 관계를 분석하기가 힘들다. 그리고 아크센서를 사용하였을 경우, 감지된 신호에 대한 신호처리가 어렵지만 가격이 저렴하고 자동화하기가 쉬우므로 현재의 산업공정에서 대부분 아크센서가 사용되고 있다. 지금까지 언급된 여러 가지 어려운 문제점과 아크센서의 특정 때문에 본 논문에서는 GMAW에서 root 갭을 검출할 수 있는 적당한 용접 파라미터들을 선정하고, root 캡과 선정된 파라미터들의 관계를 인식할 수 있는 신경회로망을 이용하여 root 갭 검출 시스템을 설계하였다. 또한, 용접 품질의 검사에 용접 비드형상이 중요한 요인이다. 따라서 본 논문에서는 신경회로망으로 용접 파라미터와 용접 비드형상과의 관계를 인식하여, 용접 품질을 추정하고 용접 파라미터들의 효과를 분석할 수 있는 용접 비드 형상의 실시간 모니터링 시스템을 제안하여 여러 실험 데이터들을 기반으로 한 시뮬레이션을 통해 제안된 시스템이 root 갭을 검출하고 또한 용접 비드 형상을 실시간으로 모니터링이 가능함 보여준다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.62-64
• /
• 2006