• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.121-130
• /
• 1986

Using the sbsorption coefficients and the weighting factors of the gray gas, the total emissivities of C $O_{2}$- $H_{2}$O and C $O_{2}$- $H_{2}$O- transient species-soot gas mixtures can be expressed by the following equation, [a numerical formula] Where, $a_{i}$ and $K_{i}$ represent the weighting factor and the absorption coeffient of i-gray gas respectively; L is the pathlength of the gas. This equation is widely used for the analyses of the radiation heat transfer in the combustors of internal combustion engines and in the furnace of external combustion engines. In this work, a simple calculation model of the weighting factor and the absorption coeffient of the above equation was developed. The weighting factors and the absorption coefficients of combustion products were calculated by applying the model to various kinds of fossil fuels such as coal and heavy oil. Then, the computed total emissivities for each fuel and pathlength were compared with measured and calculated values which have been already published in the literatures. The followings were the results obtained through the comparisons between the calculated emissivites and the published values; the developed model for the calculations of the weighting factor and the absorption coefficient of C $O_{2}$- $H_{2}$O and C $O_{2}$- $H_{2}$O- transient species-soot gas mixtures could be applied over the wide ranges of the temperature and the pathlength; the errors between the total emissivities calculted and the values published were maximum 10%, and average 1%, respectively.

• 한국수자원학회논문집
• /
• 제42권2호
• /
• pp.131-139
• /
• 2009

지구 온난화의 영향에 따른 기상 이변이 전세계적으로 급증하고 있다. 이에 따라 우리나라를 포함한 많은 나라에서 홍수예보 시스템과 수문자료를 저장하는 시스템을 운영하고 있다. 본 연구의 목적은 이러한 시스템에서 운영하고 있는 결측우량 보정방법을 알아보고 더 효과적인 보정방법을 찾아내어 제시하기 위함이다. 이를 위해 한강권역 194개 TM 우량관측소 10분 자료 이용하였다. 보정방법은 실시간 우량자료 보정시스템에서 사용이 용이한 산술 평균법, 역거리 가중법, 상관계수 가중법을 비교하였다. 결측방법 평가를 위해 일정 강우량 이상일 때의 조건에 대해 최소오차법을 사용하였다. 역거리 가중법의 경우 지수가 1.5나 2.0일 때의 결과가 양호하였으며, 방법 중에서는 상관계수가 중법이 정량적으로 가장 양호한 결과를 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.123-126
• /
• 2000

In this paper, we propose new watermarking technique using weighting factor decision method in the watermark embedding step and adaptive threshold decision method in the watermark extracting step. In our method, we are determined weighting factor in simple by calculating distance between pixel coefficient and neighborhood pixel coefficients and threshold is adaptively determined by searching the minimized extract error value using histogram of difference value.

• 대한토목학회논문집
• /
• 제26권5B호
• /
• pp.529-537
• /
• 2006

본 논문에서는 식생된 개수로 흐름의 수치모의에 필요한 항력가중계수의 영향을 분석하였다. 이를 위해 시간 및 공간 평균기법을 이용하여 식생된 개수로 흐름에서 레이놀즈응력의 수송방정식을 유도하였다. 그 결과 총 레이놀즈응력은 시간의 변동 성분에 의한 레이놀즈응력과 공간상의 변동 성분에 의한 레이놀즈응력의 합이며, 총 레이놀즈응력의 수송방정식을 수치모의하기 위한 항력가중계수의 값은 $C_{fk}$ = 1.0인 것으로 나타났다. 그러나 시간의 변동 성분에 의한 레이놀즈응력을 수치모의하기 위해서는 거의 영에 가까운 항력가중계수를 갖는 것으로 나타났다. 이는 과거의 수치모의 연구에서 항력가중계수의 값이 거의 영에 가까울 때 실험결과와 잘 일치했는지에 대한 중요한 이유이다. 즉, 공간상의 변동성분에 의한 레이놀즈응력의 값은 실험을 통해 측정하기 매우 어렵기 때문에 식생된 개수로 흐름에서 측정된 레이놀즈응력은 대부분 시간상의 변동성분에 의한 레이놀즈응력이기 때문이다. 또한 레이놀즈응력모형을 이용하여 항력가중계수에 따른 식생된 개수로 흐름을 수치모의하고 기존의 실험 결과와 비교하였다. 그 결과 평균유속과 레이놀즈응력의 경우 항력가중계수의 영향은 작은 것으로 나타났으나, 난류강도 분포에서는 항력가중계수의 영향이 매우 크게 발생하였다. 또한 총 레이놀즈응력과 시간의 변동성분에 의한 레이놀즈응력의 수송방정식에서 각 항의 수지분석을 통하여 항력가중계수가 난류강도에 미치는 영향을 분석하였다.

• 산업경영시스템학회지
• /
• 제36권3호
• /
• pp.8-16
• /
• 2013

Determining relative importance among many quality attributes under financial constraints is an important task. The weighted value of an attribute particularly in QFD, will influence on engineering characteristics and this will eventually influence the whole manufacturing process such as parts deployment, process planning, and production planning. Several scholars have suggested weighting formulas using CSC (Customer Satisfaction Coefficient) in the Kano model. However, previous research shows that the validity of the CSC approaches has not been proved systematically. The aim of the present study is to address drawbacks of CSC and to develop APC (Average Potential Coefficient), a new approach for weighting of quality attributes. For this, the current study investigated 33 quality attributes of e-learning and conducted a survey of 375 university students for the results of APC, the Kano model, and the direct importance of the quality attributes. The results show that the proposed APC is better than other approaches based on the correlation analysis with the results of direct importance. An analysis of e-leaning's quality perceptions using the Kano model and suggestions for improving e-learning's service quality are also included in this study.

• 한국수산과학회지
• /
• 제14권4호
• /
• pp.265-268
• /
• 1981

길이 250cm, 간격 10cm의 25개의 수동계 직선배열 hydrophone을 0, $\pm1$의 거형파 weighting을 부가하여 신호와 weighting과의 convolution을 구하고 이것을 동기가산하는 방법으로 얻는 방향검출과 spectrum분석은 그 실현방법을 증대시키고 정현파 weighting을 부가하는 것보다 3dB정 도 낮으나 지향성을 준 방향보다 타방향의 spectrum성분의 Power level을 적어도 16dB 정도 이상 억제할 수가 있었다. 또 신호까지 0, $\pm1$의 거형파로 바꾸는 경우는 전술한 성분을 적어도 8 dB 이상 억제할 수 있었다.

• 전자공학회논문지B
• /
• 제29B권11호
• /
• pp.93-101
• /
• 1992

HVS based transform coding techniques for still images take the lowest spatial frequency and luminance contrast sensitivity as the most crucial factors in determining the image quality perceived by human eye. Only the frequency weighting has been main issue. The proposed Weighted Discrete Cosine Transform (WDCT) has the lowest frequency of about 4 [cyc/deg] in 8$\times$8 subblock with the contrast-weighted DC coefficient. The error criteria have been rederived to adapt the contrast weighting for performance evaluation. The proposed scheme has produced higher quality images compared to the unweighted and other schemes.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1351-1359
• /
• 2003

This study presents a numerical procedure to optimize shape of streamwise periodic ribs mounted on both of the principal walls to enhance turbulent heat transfer in a rectangular channel flow. The response surface method is used as an optimization technique. The optimization is based on Navier-Stokes analysis of flow and heat transfer with $k-{\varepsilon}$ turbulence model. The width-to-height ratio of a rib, rib height-to-channel height ratio and rib pitch to rib height ratio are chosen as design variables. The object function is defined as a function of heat transfer coefficient and friction drag coefficient with weighting factor. Optimum shapes of the rib have been obtained for the range of 0.02 to 0.1 of weighting factor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.735-740
• /
• 2003

In this study, a numerical optimization to find the optimal shape of streamwise periodic ribs mounted on both of the principal walls is performed to enhance turbulent heat transfer in a rectangular channel. The optimization is based on Navier-Stokes analysis of flow and heat transfer with $k-{\varepsilon}$ turbulence model and is implemented using response surface method. The width-to-height ratio of a rib, rib height-to-channel height ratio, rib pitch to rib height ratio and distance between opposite ribs to rib height ratio are chosen as design variables. The object function is defined as a function of heat transfer coefficient and friction drag coefficient with weighting factor. Optimum shapes of the rib have been investigated for the range of 0.0 to 0.1 of weighting factor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.369-369
• /
• 2000

Control system by means of fuzzy theory has demonstrated its robustness in applying to the high-order and nonlinear dynamic system in that it can utilizes the human expert knowledges in system design. In this paper, first, the design methodology of HFC combined PID controller with fuzzy controller by membership function of weighting coefficient is proposed. Second, Second, an auto-tuning algorithms utilizing the simplified reasoning method and genetic algorithms is presented to improve the performance of hybrid fuzzy controller. Especially, in order to obtain the optimal scaling factors and PID parameters of HFC using GA based on advanced initial individual, three kinds of estimation modes such as basic, contraction, and expansion mode are effectively utilized. The proposed HFC is evaluated and discussed in ITAE, overshoot and rising time to show applicability and superiority with simulation results.