• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.49-54
• /
• 2018

Applying metric(distance) factor as weighting to spatial syntax is known to not contribute to the explanatory power for the human movement behavior as compared to the geometric(angle) factor according to the negative results of several related studies. However, Kim & Piao (2017) assumed that there is not a problem of the metric factor itself but a problem of the way of applying the metric factor as weighting, and presented a new possibility of the metric factor as weighting by proposing and verifying the methods of applying the metric weighting, which are different from the existing ones. The purpose of this study is to propose advanced methods of applying the metric weighting to space syntax, and to verify whether they contribute to the improvement of explanatory power of space syntax analysis. In this paper, we propose functions for combined depth of distance-step that combine the distance-weighted depth function with the step depth function and apply them to axial segment analysis to check the improvement of explanatory power of them.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.161-170
• /
• 2009

Purpose : A parallel imaging method provides us to improve temporal resolution to obtain three-dimensional (3D) MR images. The objective of this study was to optimize three 3D MRI techniques by adjusting 2D SESNE factors of the parallel imaging method in phantom and human brain. Materials and Methods : With a 3 Tesla MRI system and an 8-channel phase-array sensitivity-encoding (SENSE) coil, three 3D MRI techniques of 3D T1-weighted imaging (3D T1WI), 3D T2-weighted imaging (3D T2WI) and 3D fluid attenuated inversion recovery (3D FLAIR) imaging were optimized with adjusting SESNE factors in a water phantom and three human brains. The 2D SENSE factor was applied on the phase-encoding and the slice-encoding directions. Signal-to-noise ratio(SNR), percent signal reduction rate(%R), and contrast-to-noise ratio(CNR) were calculated by using signal intensities obtained in specific regions-of-interest (ROI). Results : In the phantom study, SENSE factor = 3 was provided in 0.2% reduction of signals against without using SENSE with imaging within 5 minutes for 3D T1WI. SENSE factor = 2 was provided in 0.98% signal reduction against without using SENSE with imaging within 5 minutes for 3D T2WI. SENSE factor = 4 was provided in 0.2% signal reduction against without using SENSE with imaging around 6 minutes for 3D FLAIR. In the human brain study, SNR and CNR were higher with SENSE factors = 3 than 4 for all three imaging techniques. Conclusion : This study was performed to optimize 2D SENSE factors in the three 3D MRI techniques that can be scanned in clinical time limitations with minimizing SNR reductions. Without compromising SNR and CNR, the optimum 2D SENSE factors were 3 and 4, yielding the scan time of about 5 to 6 minutes. Further studies are necessary to optimize 3D MRI techniques in other areas in human body.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1930-1933
• /
• 1991

In this paper, the robustness of self turning controller on the continuous time-delay system is investigated. The polynomial identification method using continuous time exponentially weighted least square algorithm is used for estimating the time.-delay system parameters. The pole-zero and pole placement method are adopted for the control algorithm. On considering the control weighting factor and reliability filter the effect of unmodeled dynamics of the plant are examined by the simulation.

• Journal of the Korean Professional Engineers Association
• /
• v.22 no.2
• /
• pp.19-25
• /
• 1989

Utilizing a cosine transform in image compression has several recognized performance benefits, resulting in the ability to attain large compression ratio with small quality loss. Also, various models incorporating Human Visual System (HVS) to Discrete Cosine Trans-form (DCT) scheme are considered. Using the exact frequency components of DCT basis function, the optimum modulation transfer function (MTF) is obtained analytically. The errors at a block boundary which is important factor in transform coder are criteria for error measurement. The HVS weight coding results in perceptually higher quality images compared with the unweighted scheme.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.496-499
• /
• 1990

In this paper, the robustness of implict self tunning controller on the continuous time system is investigated. Continuous time exponentially weighted least square algorithm is used for estimating the system parameters. The pole-zero placement method is adapted for the control algorithm. On considering the control weighting factor and realizability filter the effects of unmodeled dynamics of the plant are examined by the simulation.

• IE interfaces
• /
• v.1 no.2
• /
• pp.1-12
• /
• 1988

A justification methodology which evaluates the tactical aspects of an FMS project is proposed. For evaluation of quantifiable tactical costs/savings a method of internal rate of return on incremental investment is developed while for the tactical ones which are difficult to quantify a weighted factor scoring model is proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.105-110
• /
• 2018

This paper compare the adaptive equalization performance of NM-MMA (Novel Mixed-MMA) algorithm which using the mixed const function by scaling factor values. The mixed cost function of NM-MMA composed of the appropriate weighted addition of gradient vector in the MMA and SE-MMA cost function, and updating the tap coefficient based on these function, it is possible to improve the convergence speed and MSE value of current algorithm. The computer simulation was performed in the same channel, step size, SNR environment by changing the scaling factor, and its performance were compared appling the equalizer output constellation, residual isi, MD, MSE, SER. As a result of computer simulation, the residual values of performance index were reduced in case of the scaling factor of MMA cost function was greater than the scaling factor of SE-MMA. and the convergence speed was improved in case of the scaling factor of SE-MMA was greater than the MMA.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.4
• /
• pp.385-392
• /
• 1999

This study was carried out to investigate the constituents of inorganic ions of precipitation in Mokpo and Yeochon area from Jan. 1996 to Dec. 1997. The volume-weighted mean pH of precipitation was 5.7(4.8~7.8) at Mokpo, and 5.6(5.1~7.4) at Yeochon area, respectively. The non-seasalt(nss) anion concentrations were found in order of $nss-SO^{2-}_4>NO^-_3>nss-Cl^-$ at two areas. The portion of $nss-SO^{2-}_4;and;NO^-_3$ was 71~84% out of anions. The the non-seasalt cation concentrations were found in order of $NH^+_4>nss-Ca^{2-}>nss-Mg^{2+}>nss-K^-$ at two areas. The portion of $NH^+_4;and; nss-Ca^{2+}$ was 85~92% out cations. Compared regionally the year concentraton of $nss-SO^{2-}_4$, the result of Yeochon was 3 times higher than that of Mokpo in 1996, while the results of two regions were almost similar in 1997. The reason was that Yeochon was restricted area of the use of 0.5% sulfur B-C oil, controlled air pollution emission area, controlled semitotal amounts of air pollution emission area and partial operating of factories in 1997. There were no ions having high correlation with $H^+,;but;nss-SO^{2-}_4,;NO^-_3,;NH^+_4;and;nss-Ca^{2+}$ showed high correlation coefficient each other. It seems that these ions have little correlation with $H^+$ because they are washed out on binding state. Factor analysis showed that the first factor was complicated factor containing anthropogenic and soil resource, the second factor was sea-salt resource and the third factor was independent behavior of hydrogen at Mokpo. While, the first factor was complicated factor containing anthropogenic and sea-salt resource, the second factor was $Ca(NO_3)_2$ salt and the third factor was $NH^+_4;and;SO^{2-}_4$ synergied by resource and combination at Yeochon.

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.83-91
• /
• 2011

The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.146-149
• /
• 2017

In this study, we compared the standardized value of each signal intensity, the apparent diffusion coefficient (ADC) that digitizes the diffusion of water molecules, and the signal to noise ratio (SNR) using b value 0 400, 1400 ($s/mm^2$). From March 2013 to December 2013, patients with suspicion of simple compound fracture and metastatic spine cancer were included in the MR readout. We used a 1.5 Tesla Achieva MRI system and a Syn-Spine Coil. Sequence is a DWI SE-EPI sagittal (diffusion weighted imaging spin echo-echo planar imaging sagittal) image with b-factor ($s/mm^2$) 0, 400, 1400 were used. Data analysis showed ROI (Region of Interest) in diseased area with high SI (signal intensity) in diffusion-weighted image b value 0 ($s/mm^2$) Using the MRIcro program, each SI was calculated with images of b-value 0, 400, and 1400 ($s/mm^2$), ADC map was obtained using Metlab Software with each image of b-value, The ADC is obtained by applying the ROI to the same position. The standardized values ($SI_{400}/SI_0$, $SI_{400}/SI_0$) of simple compression fractures were $0.47{\pm}0.04$ and $0.23{\pm}0.03$ and the standardized values ($SI_{400}/SI_0$, $SI_{400}/SI_0$) of the metastatic spine were $0.57{\pm}0.07$ and $0.32{\pm}0.08$ And the standardized values of the two diseases were statistically significant (p < 0.05). The ADC ($mm^2/s$) for b value 400 ($s/mm^2$) and 1400 ($s/mm^2$) of the simple compression fracture disease site were $1.70{\pm}0.16$ and $0.93{\pm}0.28$ and $1.24{\pm}0.21$ and $0.80{\pm}0.15$ for the metastatic spine. The ADC ($mm^2/s$) for b value 400($s/mm^2$) was statistically significant (p < 0.05) but the ADC ($mm^2/s$) for b value 1400 (p > 0.05). In conclusion, multi - b value recognition of signal changes in diffusion - weighted imaging is very important for the diagnosis of various spinal diseases.