• The Korean Journal of Applied Statistics
• /
• v.14 no.2
• /
• pp.289-304
• /
• 2001

2001년에 실시할 $\ulcorner$국민건강.영양조사$\lrcorner$를 위한 새로운 표본설계를 하였다. 본 표본설계에서는 표본의 대표성을 높이기 위해서 기존의 표본가구수는 유지하면서 표본조사구를 증가시키고 새로운 지역 층화변수를 추가로 도입하였다. 또한 추정량의 추정오차 공식을 유도하여 추정의 신뢰성을 측정할 수 있도록 설계하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.323-332
• /
• 1996

Precipitation samples were collected by the wet-only sampling method at Seoul from September 1993 to June 1995. Sample were analysed for the anions $(NO_3^-, NO_2^-, SO_4^{2-}, Cl^-, and F^-)$ and cations $(Na^+, K^+, Ca^{2+}, Mg^{2+}, and NH_4^+)$ in addition to pH and electric conductivity. In order to establish the chemical analysis data of high quality, the assurance checks for analytical data of precipitation were performed by considering the ion balance and by comparing the measured conductivity with the calculated conductivity. As we applied the various assurance checking methods by the ion balance used until recently to a data set measured in this study, the f value expressed as $\Sigma C/\Sigma A$ was found to be not appropriate for the data screening. Also, the scattering plot between cations and anions in each sample was found to show the general tendency of ion balance but was proved to not quantitate the standard of data screening at a data set of samples of various concentration levels. The h value defined as (A-C)/C for C $\geq$ A and (A-C)/A for C < A was used to check the ion balance. However, the standard of data screening by h value must very in response to total ion concentration of samples. In this study, the quality assurance of chemical analysis data was checked by considering both the ion balance of evaluating by h value and the conductivity balance. Further the quality control was achieved by these quality assurance methods. As the result, 67 samples among total 77 were obtained as valid. As the central tendency value for a statistical summary in the analytical parametr of samples, the volume-weighted mean value was found to represent more the general chemistry of precipitation rather than the arithmetic mean. The volume-weighted mean pH was 5.0 and 25% of samples was less than this mean. The concentrations of sufate and nitrate in precipitation were 90.4 ueq/L and 32.4 ueq/L which made up 59% and 21% of all anions. The raion of $SO_4^{2-}/(NO_3^- + NO_2^-)$ in precipitation was 2.7, which indicates that the contributions of $H_2SO_4$ and $HNO_3$ to the acidity of precipitation are 70% and 30%, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.154-163
• /
• 1991

Particulate matter exposure leva1 of welders and grinding workers was evaluated in Banwol and Changwon industry complexes. Full period single sample and full period consecutive samples were collected with personal air samplers attached to workers. Compliance difference with 8-hour time weighted average (TWA) was compared by Korean strategy and the classification system recommended by OHSA for employee exposure to particulates. And difference of compliance was compared according to precision of measurement and analysis (total precision). Compliance rate was depended on the total precision, therefore, quality control of measurement and analysis was important.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.2
• /
• pp.25-37
• /
• 2021

Purpose: The main purpose of this study is to develop an evaluation system using the weighted-values of various users and experts for the public space to apply Universal Design, and additionally to find out the commonalities and differences by comparing the importance of evaluation indicators between users and expert groups. Method: A one-sample t-test was conducted to verify that the components of the public space to universal design application are suitable as evaluation indicators, and AHP(analytic hierarchy process) was performed to derive weight-values for the evaluation system. Results: The importance-values for the total 23 facilities to be used as evaluation indicators were derived by multiplying the weighted-values of each sector, domain, and facility by the disabled, non-disabled, and experts. To summarize the results of overall importance-values derived from the AHP, The disabled showed high-rank weighted-values in facilities of building sector > park & recreation sector > cross domain and low-rank weighted-values for sidewalk and roadway domain. The non-disabled showed high-rank weighted-values in facilities of park & recreation sector > roadway domain > building sector > cross domain and low-rank weighted-values for sidewalk domain. Experts mainly showed high-rank weighted-values in the cross domain and in facilities related to entry and movement to the target space in all sectors and domains. However, it showed moderate importance-values in the sanitary space. The disabled who are restricted to movement have a high demand for universal design in buildings consisting of vertical moving line, and non-disabled people who are not limited to physical movement have a high demand for universal design in parks and recreation sector for increased leisure time. It means that experts are important to recognize the principles of making space because they value cross domain and the key spaces and facilities for suitable the purpose of use. In addition, it can be inferred that non-disabled people have a higher demand for safety than disabled people due to their high importance in roadway domain and facilities of safety and disaster prevention. Implications: The significance of this study is the establishment of a quantitative universal design evaluation system for public spaces considering the different perspectives of the disabled and the non-disabled.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.2
• /
• pp.69-75
• /
• 1985

The proposed seal identification procedure consists of the smoothing, rotation, thinning, and matching techniques. The seal images which are scanned by CCTV are thresholded into the binary prctures of $256{\times}256$ pixels through A/D converter and 6502 microcomputer. After the sample and target images are ratated into an identical orientation, a thinning process is used to extract the skeletons of the character strobes. The wighted map is constructed by distance weight from which the distance weighted correlation C is computed. The C is compared with the dicision constant C or C for the purpose of seal indentification. The identification rate is 95% and the total CPU time is less than 3 minutes for each identification in the experiment.

• Journal of the Korean Statistical Society
• /
• v.26 no.1
• /
• pp.1-22
• /
• 1997

In the linear regression model $y_{i}$ = .alpha. $x_{i}$ $^{T}$ .beta. + .epsilon.$_{i}$ , i = 1,2,...,n, the weighted pairwise absolute deviation (WPAD) estimator was defined by minimizing the dispersion function D (.beta.) = .sum..sum.$_{{i $w_{{ij}}$$\mid$ $r_{j}$ (.beta.) $r_{i}$ (.beta.)$\mid$, where $r_{i}$ (.beta.)'s are residuals and $w_{{ij}}$'s are weights. This estimator can achive bounded total influence with positive breakdown by choice of weights $w_{{ij}}$. In this paper, we consider a more general type of dispersion function than that of D(.beta.) and propose a pairwise GM-estimator based on the dispersion function. Under some regularity conditions, the proposed estimator has a bounded influence function, a high breakdown point, and asymptotically a normal distribution. Results of a small-sample Monte Carlo study are also presented. presented.

• International Journal of Quality Innovation
• /
• v.10 no.1
• /
• pp.25-36
• /
• 2009

The purpose of this study is to analyze the efficiency of the service quality activity itself by using the DEA Model, in contrast to previous quality evaluation methods, as an attempt to evaluate the service quality activities of the distribution industry. Furthermore, by complementing the shortfalls of the weighted value of the DEA Model, it recommends a DEA/PS Model that is appropriate in the evaluation of service quality activities. Based on this model, the study proposes the SQAE Model, an evaluation tool to complement the traditional measuring method. According to the results of the analysis of 18 sample distribution businesses, there was a discrepancy by business in the results of the Traditional Scoring System and the Evaluation Measuring System. Therefore, it is most desirable to not only be active in service quality activities but also increase efficiency at the same time.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.143-151
• /
• 1996

The concept of cellular manufacturing is to decompose a manufacturing system into subsystems, which are easier to manage than the entire manufacturing system. The objective of cellular manufacturing is to group parts with similar processing requirements into part families and machines into cells which meet the processing needs of part families assigned to them. This paper presents a methodology for cell formation based on genetic algorithm which produces improved cell formation in terms of total moves, which is a weighted sum of both intercell moves and intracell moves. A sample problem is solved for two, three and four cells with an approach based on genetic algorithms.

• Journal of Korean Clinical Nursing Research
• /
• v.15 no.1
• /
• pp.93-106
• /
• 2009

Purpose: The purpose of this study was to develop a valid and reliable instrument to explore and measure job satisfaction as perceived by perioperative nurses, specifically from the perspective of contemporary perioperative nursing in Korea. Method: Items (69) were developed from the responses to two open-ended questions by 168 perioperative nurses in one teaching hospital; (a) reasons that make work enjoyable, (b) reasons that make work unpleasant. Finally 55 items were selected, excluding items with lower correlation with the total scale. The instrument was completed by 885 perioperative nurses from 89 different hospitals nationwide who were attending the annual conference of the Korean Association Operating Room Nurses (KAORN), yielding a response rate of 95.6%. Results: Ten factors were extracted by factor analysis, which explained 60.0% of the total variance; Reliability and internal consistency were established (Cronbach's alpha=.95). A smaller sample of 39 perioperative nurses completed the instrument on two occasions, with a 2-week interval between. Mean scores were computed and two sets of scores were analyzed by Weighted Kappa (W-Kappa=0.680, p=.029). Conclusion: This instrument is a concise, highly practical and flexible tool, which can be used for the perioperative nurse in a wide range of hospital settings.

• Journal of Korean Clinical Nursing Research
• /
• v.26 no.1
• /
• pp.107-116
• /
• 2020

Purpose: This study was a prospective survey to evaluate the Korean Triage and Acuity Scale (KTAS) inter-rater reliability and to identify discordant areas in the KTAS classification between nurses and paramedics in emergency department (ED). Methods: Inter-rater reliability were evaluated using triage deta from January 11 to May 31, 2019. A convinience sample of a total of 800 patients who visited an emergnecy medical center in Incheon (400 adult and 400 pediatric patients in this study) were selected. The triages of this study a pair of one nurse and one paramedic performed triage at the same time, using the KTAS, Inter-rater reliability for the KTAS was evaluated with the weighted kappa. Results: The inter-rater reliability of the KTAS evaluated by weighted Kappa between nurse-paramedic KTAS score of adult patients was .71, and .66 for pediatric patients. Both were in the level considered as substantial. Among causes of triage discordance, the most frequently identified discordant item in triaging adults was the difference in the measurement of pain intensity (28.0%). For both adult and pediatric patients, multiple chief complaint was identified as the major discordant factor. In triaging pediatric patients the body temperature assessment by subjective judgments was the highest discordant item (50.7%). Conclusion: The study result suggested that the KTAS demonstrated a reasonable level of inter-rater reliability and functioned as a standardized triage tool for emergency medical services. In order to improve the inter-rater reliability and classification competence, it is necessary to revise the current all-integrated KTAS provider course to be differentiated for each job group.