• 약학회지
• /
• 제34권1호
• /
• pp.54-63
• /
• 1990

These studies were made to assess the present stage of resistance of Shigella species to antibiotics and to find characteristics of R-plasmid of these bacteria. From 1986 to 1988, 125 strains of Shigella species were isolated from patients specimens collected in Chung Cheong-do Hospital, Kyunghee Medical Center, city an provincial health & environmental institutes. These specimens were tested for resistance to 12 kinds of antimicrobial agents by agar dilution method. Using Muller-Hinton agar for the assay of drug resistance and Trypticane Soy Broth as propagating medium for conjugation. All the strains (100%) were resistant to one or more antibiotics. Drug resistance patterns of isolated strains were found as the highest resistance to ampicillin (98%) in 1986, to tetracycline (98%) in 1987, to tetracycline (100%) in 1988, all strains were sensitive to gentamicin, amikacin, tobramycin. Chronologically, resistance decreased gradually as it was shown in relation to kanamycin, rifampicin in 1986, 1987 and 1988, (4%, 2%) (4%, 2%) (0%, 0%) respectively. But, resistance was increased year by year as it was shown in relation to tetracycline, nalidixic acid, streptomycin in 1986, 1987, 1988 (89%, 19%, 45%) (98%, 46%, 71%) and (100%, 58%, 88%). The resistance in correlation to more than 5 drugs, which was 13 strains among 47 strains in 1986, 38 strains among 87 strains in 1987, 23 strains among 26 strains in 1988, was increased gradually. In the transfer test of drug resistance by conjugation methods, the rate which was 3 strains (50%) in 1986, 8 strains (62%) in 1987, 3 strains (100%) in 1988, was increased gradually. When the donor strains were conjugated with the recipient strains, the conjugation rate was high in the multiple resistant strains. The relationships of transferring patterns of drug resistance and molecular weight of R-plasmid were variable. However, only a plasmid which has more than 35 Mgd was transferred.

• 대한전자공학회논문지TC
• /
• 제49권7호
• /
• pp.32-38
• /
• 2012

다중경로 전파에 의한 수신 신호의 심벌간 간섭을 제거하기 위해, 두 오차 추정 함수를 사용하는 병렬 등화(parallel equalization) 알고리즘을 제안한다. 제안 알고리즘에서는 다치레벨 이차원 신호를 등가 이진 신호로 간주하고, 등화 초기에 효과적인 시그모이드 함수와 정상상태 성능이 우수한 임계 함수를 사용하여 각각 오차를 추정한다. 이때 두 오차 추정의 상대적 정확도에 따라 두 오차를 가중 처리하여 두 필터를 서로 다르게 갱신하도록 하였다. 결과적으로 결합된 두 필터의 출력이 최적한 값이 되도록 하였으며, 두 동작 모드를 완만하게 결합하는 효과로 등화 초기의 빠른 수렴과 정상상태에서의 낮은 오차 레벨을 동시에 달성하였다. 제안 알고리즘의 유용성을 모의실험을 통해 기존 방식과 비교, 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.49-52
• /
• 2008

유리섬유를 사용한 섬유강화복합체(Glass Fiber Reinforced Polymer, GFRP) 보강근의 인장강도 및 부착성능 등은 철근과 다르기 때문에 GFRP 보강근을 콘크리트 구조물에 적용하기 위해서는 GFRP 보강근으로 보강된 콘크리트 부재의 거동에 관한 연구가 선행되어야 한다. GFRP는 높은 비강도, 경량성, 비부식성 등의 장점을 가지고 있으나 탄성계수가 철근보다 작아 상대적으로 큰 처짐이 발생하는 단점이 있다. 교량 바닥판은 아칭효과 등에 의해 휨성능이 증가하므로 FRP 보강근을 우선 적용할 수 있는 대상 중 하나이다. 본 논문은 국내에서 개발된 철근 대체재용 GFRP 보강근의 콘크리트 구조물로의 적용 가능성을 관찰하기 위한 실험연구에 관한 것으로 폭과 길이가 3,000 mm, 4,000 mm이고 두께가 240 mm인 실제 크기의 콘크리트 바닥판을 제작하여 GFRP 보강근의 보강비에 따른 거동을 관찰하였다. 정적실험을 수행하였으며 DB-24 하중등급의 축하중을 모사한 재하면적을 가진 직사각형 강재로 바닥판이 파괴될 때까지 집중하중을 가하였다. 철근 보강 바닥판과 GFRP 보강 바닥판의 거동차이를 최대성능 및 처짐 거동 등에 대해 비교 검토하였다.

• Journal of Periodontal and Implant Science
• /
• 제50권4호
• /
• pp.268-277
• /
• 2020

Purpose: Many home care treatments can be used to promote the health and longevity of dental implants; however, few studies are available to support the concept that self-performed oral hygiene behaviors are an essential tool for improving and maintaining oral health. We investigated age-stratified associations between dental health behaviors related to tooth brushing (TB) and oral hygiene product use in Korean adults with implants. Methods: A total of 1,911 subjects over 19 years of age who had 1 or more implants and who participated in the 2013 to 2015 Korea National Health and Nutrition Examination Survey were reviewed. Periodontal status was assessed using Community Periodontal Index (CPI) scores, and periodontitis was defined as a CPI greater than or equal to 3. The complex sampling design of the survey was utilized to obtain the variance and individual weight of each analyzed factor. A high CPI was the outcome variable, and the main explanatory variables were oral hygiene behaviors, such as TB, dental floss (DF), interproximal brushing, and mouth rinsing. Results: Almost all individuals with a lower CPI brushed their teeth twice or more per day, in contrast to those with a higher CPI, and were likely to use DF. The adjusted odds ratio of not using DF for a higher CPI was 1.83 (95% confidence interval, 1.35-2.49). Conclusions: TB was implemented more than twice a day by patients with good oral health, and the combination of TB and DF significantly reduced the prevalence of a higher CPI. Self-performed oral hygiene practices combining TB and DF were significantly related to a low prevalence of periodontitis in implant patients.

• 대한가정학회지
• /
• 제12권2호
• /
• pp.621-631
• /
• 1974

The objective of the study was to obtain standard sizes of body of the high school girls for designing clothes and developing pattern grading of clothes. In 1972, 342 students, selected by the stratified cluster random sampling method, at three high schools in Seoul were measured on forty-one items by the R. Martin method. Statistical techniques of mean, standard deviation, coefficient variable, maximum and minimum, range, t-test were utilized to analyze the data. The findings of the study were as follows ; 1. No differences were found among the age groups in the all measured variables. 2. Stature, bust girth, hip girth, acromion width, posterior waist girth/stature ratio of the high school girls were significantly smaller than those sizes of adult women. This result implies that those sizes will be increased as the students grow up. But upper arm girth, upper arm girth/bust girth ratio, and thigh girth/bust girth ratio were bigger than those sizes of adult women. Waist girth, thigh girth, total head height/stature ratio, acromion width/stature ratio, and foot length/stature ratio were nearly similiar to those of adult women. 3. According to the result of t-test, waist breadth, spinailiaca anterior height/stature ratio, thigh girth/bust girth ratio, and thigh/hip girth ratio of the 15 year old group were significantly different from those of the 16 year old group at the level of 0.05. Bust girth, weight, foot breadth, posterior croth length, and cervical height/stature ratio of the 16 year old group were significantly different from those of the 17 year old group at the level of 0.01. Hip girth, upper arm girth, waist breadth/stature ratio, and neck base girth/bust girth ratio of the 16 year old group were significantly different from those of the 17 year old group at the level of 0.05.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.42-50
• /
• 2008

Various researches to reduce weight of a vehicle are achieving. One of these researches is tendencious to manufacture the hollow piston rod using friction welding instead of solid one of the vehicle shock absorber. This study deals with the friction welding of SM45C to SM20C-pipe that is used normally in the vehicle shock absorber. The friction time was variable conditions under the conditions of spindle revolution of 2,000rpm, friction pressure of 55MPa, upset pressure of 75MPa, and upset time of 2.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests of friction weld were studied and so the results were as follows. When the friction time was l.5seconds under the conditions, the maximum tensile strength of the friction weld happened to be 837MPa, which is 113% of SM20C's tensile strength and 97% of SM45C's. The optimal welding conditions were n=2,000rpm, $P_1=55MPa$, $P_2=75MPa$, $t_1=1.5sec$, $t_2=2.0sec$ when the total upset length is 1.7mm.

• 산업경영시스템학회지
• /
• 제43권2호
• /
• pp.79-86
• /
• 2020

To make a satisfactory decision regarding project scheduling, a trade-off between the resource-related cost and project duration must be considered. A beneficial method for decision makers is to provide a number of alternative schedules of diverse project duration with minimum resource cost. In view of optimization, the alternative schedules are Pareto sets under multi-objective of project duration and resource cost. Assuming that resource cost is closely related to resource leveling, a heuristic algorithm for resource capacity reduction (HRCR) is developed in this study in order to generate the Pareto sets efficiently. The heuristic is based on the fact that resource leveling can be improved by systematically reducing the resource capacity. Once the reduced resource capacity is given, a schedule with minimum project duration can be obtained by solving a resource-constrained project scheduling problem. In HRCR, VNS (Variable Neighborhood Search) is implemented to solve the resource-constrained project scheduling problem. Extensive experiments to evaluate the HRCR performance are accomplished with standard benchmarking data sets, PSPLIB. Considering 5 resource leveling objective functions, it is shown that HRCR outperforms well-known multi-objective optimization algorithm, SPEA2 (Strength Pareto Evolutionary Algorithm-2), in generating dominant Pareto sets. The number of approximate Pareto optimal also can be extended by modifying weight parameter to reduce resource capacity in HRCR.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.9-14
• /
• 1999

삼파장 형광등의 제작에서 문제가 되는 것은 원하는 목표 색을 맞추기 위하여 혼합하는 세 가지 형광물질의 혼합비율이다. 한 형광체의 광 스펙트럼이 약간 변형되거나, 공정변수에 의하여 변경되거나, Ar과 Kr 같은 불활성가스의 스펙트럼이 혼재하거나 또는 재래 할로인산칼슘이 공존할 경우 원하는 정확한 색을 찾기가 매우 힘들어지게 된다. 이 연구에서는 원하는 목표 색을 빠르게 찾는 방법을 연구하였다. 세 개의 각각의 단일색의 형광등과 3색을 서로 다른 비율로 혼합한 형광등을 만들고 각각의 스펙트럼을 측정한 후 이로부터 알곤과 수은의 스펙트럼을 빼서 변형 색 좌표를 얻었다. 이 변형 색 좌표로부터 적생에 대한 청색과 녹색의 광속비를 그의 무게 비에 대하여 도시하여 무게 대 광속비의 관계를 구하였다. 이 관계식을 이용하여 생산라인에서 삼파장 형광체의 단일 도포 및 할로인산칼슘을 1차로 도포하는 2중 도포를 실시하여 목표색을 조합해본 결과 만족할만한 결과를 얻었다.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.37-41
• /
• 2017

With light vehicle weight gradually becoming ever more importance due to tightened exhaust gas regulations, hot-stamping processing using boron alloyed steel is being applied more and more by major automobile OEMs since process assures both moldability and a high strength of 1.5 GPa. Although laser trimming is generally applied to the post-processing of the hot-stamped process with high strength, there have been many studies of in-die hot trimming using shear dies during the quenching of material in order to shorten processing times. As such, this study investigated the effects of the Shear rate and Shear mechanism on shear processes during the quenching process of hot-stamping material. In case of pad variable, padding force is very weak compared with shear force, so it does not affect the shear surface. In case of shear rate, the higher the shear at high temperatures and the higher the friction effect. As a result the rollover and the fracture distribution decreased, and the burnish distribution increased. Therefore, it is considered that the shear quality is guaranteed when high shear rate is applied in high temperature shear process.

• 한국운동역학회지
• /
• 제22권4호
• /
• pp.429-435
• /
• 2012

The purpose of this study was to determine the biomechanical effect of wearing carbon nanotube-based insole on cushioning and muscle tuning during drop landing. Twenty male university students(age: $21.2{\pm}1.5yrs$, height: $175.4{\pm}4.7cm$, weight: $70.2{\pm}5.8kg$) who have no musculoskeletal disorder were recruited as the subjects. Average axial strain, average shear strain, inversion angle, linear velocity, angular velocity, vertical GRF and loading rate were determined for each trial. For each dependent variable, a one-way analysis of variance(ANOVA) with repeated measures was performed to test if significant difference existed among different three conditions(p<.05). The results showed that Average axial strain of line 4 was significantly less in CNT compared with EVA and PU during IP phase. The average shear strain was less in CNT compared with EVA and PU during other phases. The inversion angle was increased in CNT compared with EVA and PU during all phase. In linear velocity, angular velocity, vertical GRF and loading rate, there were no significant difference between the three groups. This result seems that fine particle of carbon nanotube couldn't make geometric form which can absolve impact force by increasing density through eliminating voids of forms. Thus, searching for methods that keep voids of forms may play a pivotal role in developing of insole. This has led to suggestions of the need for further biomechanical analysis to these factors.