• Journal of Nutrition and Health
• /
• v.33 no.1
• /
• pp.42-48
• /
• 2000

The study was designed to observe the effect of complete listing for 10 days on body fatness, serum leptin level and lipid profile in thirty women who were admitted to fasting Clinical Program in Kyung-Hee Oriental Medical Center. Most of the subjects had food habits of over-eating and preferred oily foods which was correlated to the increase of body weight and BMI during realimentation. Average loss of body weight was 7.98kg and waist-hip ratio was significantly decreased during fasting. Body weight showed significant positive correlation with body fat(r=0.8182), lean body mass(r=0.7797) and total body water(r=0.7563). Body fat was gradually reduced after 9 days fasting, but lean body mass was not diminished any more after 7 days luring. Serum leptin level was significantly decreased after luring and re-feeding. The leptin showed significant positive correlation with body weight(r=0.9324), body mass index(r=0.8279) and body fat(r=0.8376). The levels of serum total cholesterol and LDL-C were significantly increased but HDL-C level was significantly decreased after fasting which increased could be harmful for persons with hypercholesterolemia. VLDL-C and triglyceride levels were not significantly decreased after fasting. Serum total free fatty acid level was significantly increased after fasting. These data suggest that the best way of maintaining the reduced body weight was to carry out the modification of food habits and behavior in daily lift. It could not be recommended to repeat often complete luting for reduction of body weight. (Korean J Nutrition 33(1) : 42-48, 2000)

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.337-344
• /
• 2013

This research has been conducted to determine the effect that the visually handicapped's participation in an aerobic exercise program has on cardiorespiratory function and arterial pulse wave. The subjects of this research were 20 people who have a 1st degree visual impairment. They recognized the purpose of this research and agreed to take part in it. After receiving agreements from their guardians, we divided them into an exercise group of 10 and a comparison group of 10 at random. The exercise group conducted a 50-70%HRmax treadmill exercise for 60 minutes a day, five times a week, for 12 weeks, including warm up and warm down exercises. We then conducted a two-way repeated ANOVA, which regards the period of exercise and the two groups as independent variables. The follow-up verification for exercise periods according to each group was carried out with a paired t-test. The statistical significance level was p<.05. The following are the results of this research. First, the weight and body fat of the experiment group after exercise show a meaningful reduction compared to before the exercise program (p<.05).Second, the VO2max, HRmax, and VEmax of the experiment group after exercise show a meaningful increase compared to before the exercise program (p<.05). Third, the arterial pulse wave of the experiment group after exercise display a meaningful increase compared to before the exercise program (p<.05). Fourth, the systolic blood pressure of the experiment group after exercise does not show a meaningful reduction compared to before the exercise program (p>.05). These results prove that the visually handicapped's participation in an aerobic exercise program is effective in the improvement of their cardiorespiratory function, bloodstream circulation function and blood vessel function.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.109-119
• /
• 2021

Thermal environment of city is getting worse due to severe urban heat island caused by climate change and urbanization. Green roof improves the urban thermal environment and save the cooling energy in buildings. This study presented a green roof combined with a storage system that stores rain-water and supplies water through a wick and evaluated the temperature reduction effect as surface temperature and amount of evapotranspiration. For about a week, the surface temperature using a infrared thermal imager and the evapotranspiration by recording change of module weight were measured at intervals of 30 minutes from sunrise to sunset. The results show that the mean surface temperature of the green roof was 15.4 degrees lower than that of the non-green roof from 12:00 P.M. to 14:00 P.M. There was no significant difference between mean surface temperature of green roof with and without storage system immediately after rain, but more than a week after rain, there was a difference with average of 2.49 degrees and maximum of 4.72 degrees. The difference in daily amount of evapotranspiration was measured to be 1.66 times on average. As drought stress increased over time, the difference in daily amount of evapotranspiration and surface temperature between with/without storage system increased simultaneously. The results of the study show a more excellent cooling effect of green roof combined with the rainwater storage system.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.613-619
• /
• 2011

Colloidal silver nanoparticles (AgNPs) have been commercialized as the typically stabilized form via the addition of a variety of surfactants or polymers. Herein, to examine the effects of stabilizing AgNPs in suspension, we modified the surface of bare AgNPs with four type of surfactants (NaDDBS, SDS, TW80, CTAB) and polymers (PVP, PAA, PAH, CMC). The modified AgNPs was applied to compare suspension stability and nanotoxicity test using Escherichia coli (E. coli) as a model organism. Modification of AgNPs surface using chemical stabilizer may be not related with molecular weight, but chemical structure such as ionic state and functional group of stabilizer. In this study, it is noteworthy that AgNPs modified with a cationic stabilizer (CTAB, PAH) were importantly toxic to E. coli, rather than anionic stabilizers (NaDDBS, SDS). Comparing similar anionic stabilizer, i.e., NaDDBS and SDS, the result showed that lipophilicity of chemical structure can affect on E. coli, because NaDDBS, which contains a lipophilic benzene ring, accelerated the cytotoxicity of AgNPs. Interestingly, none of the stabilizers tested, including biocompatible nonionic stabilizers (i.e., TW80 and cellulose) caused a reduction in AgNP toxicity. This showed that toxicity of AgNPs cannot be reduced using stabilizers.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.169-176
• /
• 2011

The two-step water splitting thermochemical cycle is composed of the T-R (Thermal Reduction)and W-D (Water Decomposition)steps. The mechanism of this cycle is oxidation-reduction, which produces hydrogen. The reaction temperature necessary for this thermochemical cycle can be achieved by a dish-type solar thermal collector (Inha University, Korea). The purpose of this study is to validate a water splitting device in the field. The device is studied and fabricated by Kodama et al (2010, 2011). The validation results show that the foam device, when loaded with $NiFe_2O_4/m-ZrO_2$powder, was successfully achieved hydrogen production with 9 (10 with a Xe-light solar simulator, 2009, Kodama et al.) repeated cycles under field conditions. Two foam device used in this study were tested for validation before an experiment was performed. The lab scale ferrite-conversion rate was in the range of 24~76%. Two foam devices were designed to for structural stability in this study. In the results of the experiments, the hydrogen percentage of the weight of each foam device was 7.194 and $9.954{\mu}mol\;g^{-1}$ onaverage, and the conversion rates 4.49~29.97 and 2.55~58.83%, respectively.

• Child Health Nursing Research
• /
• v.15 no.1
• /
• pp.71-80
• /
• 2009

Purpose: This study was done to investigate the effects of an infant massage on physical growth and stress response in preterm babies. Method: A nonequivalent control group with pre-posttest design was used with 56 preterm babies in the NICU of E medical center at Daejeon. Data were collected from July 2004 to May 2005. The intervention was given for 15 minutes, once a day for 7 days. Physical growth was measured by weight, length, head circumference, and stress response was measured by serum cortisol level. Mean, %, paired-test, t-test with the SPSS/W in 16.0 program were used to analyze the data. Results: After the intervention, physical growth variables (weight, length, head circumference) in experimental group were higher than that of the control group. Also, the serum cortisol level in the experimental group was lower than that of the control group. But none of these results were not statistically significant. Conclusion: The results of this study suggest that a 7-day intervention period may not be long enough to confirm the effects of infant massage on physical growth and stress reaction. Therefore it is suggested that a longer period of infant massage should be tested to determine if it is effective in improving the physical growth and stress reduction in preterm babies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.367-368
• /
• 2012

In resent years, engineering thermoplastics represent a means for designers to integrate parts, facilitate assembly, reduce weight and lower the costs of their parts to improve the fuel efficiency and competitiveness of the cars. Thermoplastic turbo charger intake hose is one of most sophisticated application in thermoplastics under the hood. Used as part of weight & cost reduction and performance improvement program, thermoplastic turbo charger intake hose has been developed as rubber and metal replacement. For optimized product, NVH performance is a important criteria while keeping same durability required with current system. Though a number of studies have been conducted on the resonator hose and its analytical models, the most of studies were focused on transmission loss itself. This paper presents contribution of vehicle interior noise according to design parameters like profile, bellows type, bellows position, material characteristic. And we will review the design guidance for optimized product of thermoplastic turbo charger intake hose.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.279-289
• /
• 2009

For a Product Oil Carrier, longitudinal bulkhead as well as transverse one is corrugated shape in general and intersection part of bulkheads is utilized for a pipe trunk. Since lower and upper stools are to be connected with all of longitudinal and transverse bulkheads, they have a uniform height respectively. The purpose of this study is the development of design system for the minimization of total weight of longitudinal and transverse bulkheads at the initial design stage. In this study, the beam element models for longitudinal and transverse corrugated bulkheads are established and they are applied to the structural analysis. For the practical design, the selection and the position of an additional pipe trunk are considered in this study. In addition the required minimum distance between the bracket installed along the web of corrugation at lower stool and the diaphragm is taken into consideration during optimization process. Evolution strategy(ES) is adopted as an optimization technique.

• Journal of Korean Medicine for Obesity Research
• /
• v.1 no.1
• /
• pp.13-20
• /
• 2001

Obesity is an excess of body fat frequently resulting from an imbalance between energy intake and expenditure, raises the risk of morbidity from chronic diseases such as hypertension, dyslipidemia, type 2 diabetes, coronary heart disease, stroke, fatty liver and osteoarthritis. Recently we experienced a 51 years old obese woman who was accompanied with hypertension, dyslipidemia and osteoarthritis. Through weight reduction program(very low calorie diet, Chegameuiintang, exercise) during 3 months, total weight loss was 17.0kg, her condition was improved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.656-660
• /
• 2002

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field where lightweight and the high pressure is demanded from the defense and aerospace industry to rocket motor case due to the merits which are energy curtailment by the weight reduction and decrease of explosive damage precede to the sudden explosion which is generated by the pressure leakage condition. In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS 5.7.1, the general commercial program, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.