• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.127-136
• /
• 2003

The top-to-bottom compression strength of corrugated board box is the most important mode of loading during it's no, and it depends largely on the edgewise compression strength of the corrugated board in the cross-machine direction and to a considerable extent on the flexural stiffness in both principal directions (CD; cross-machine direction, MD; machine direction) of the corrugated board. Corrugated board is a sandwich structure with an orthotropic property. The purpose of this study was to elucidate the principal design parameters for board combination of corrugated board from the viewpoint of bending strength through the finite element analysis [FEA] fur the various corrugated board. In general, the flexural stiffness [FS] in the MD was 2-3 times larger than that in the CD, and the effect of liner for the FS of corrugated board was much bigger than that of corrugating medium. The flexural stiffness index [FSI] was high when the stiffness of liner was in the order of inner, outer, and middle liner in double-wall corrugated board [DW], and the effect of the stiffness arrangement or itself reinforcement of corrugating medium on the FSI was not high. In single-wall corrugated board [SW] with DW. the variation of FSI with itself stiffness reinforcement of liner was much bigger than that with stiffness arrangement of liner. The highest FSI was at the ratio of about 2:1:2 for basis weight distribution of outer, middle, and inner liner if the stiffness of liner and total basis weight of corrugated board were equal in DW Secondarily. basis weight was in the order of inner, outer, and middle liner. However, the variation of FSI with basis weight distribution between liner and corrugating medium was much bigger than that with itself basis weight distribution ratio of liner and corrugating medium respectively in both DW and SW. md the FSI was high as more total basis weight was divided into liner. These phenomena fur board combination of corrugated board based on the FEA were well verified by experimental investigation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.214-215
• /
• 2014

Technologies on energy saving and materials used in curtain walls have progressed with increase of high-rise and large buildings. This study is explain fire resistance performance of the curtain walls. And focused on bond strength of light-weight inorganic ceramic board in high temperature for fire resistant curtain-wall system. From the result, curtain-wall system high fire resistant using the light-weight inorganic ceramic board.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.1
• /
• pp.1-5
• /
• 1987

The authors carried out an experiment to determine the vertical opening of the midwater trawl, which is the same used in the former experiment in this series of studies. To determine the vertical opening of otter board and front weight, three fish finders were used. A 200 KHz fish finder set on board the research vessel was used to sound the depth of water. A transmitter of 50 KHz fish finder was set through the shoe plate of otter board to determine the height of otter board from the sea bed, and a transmitter of another 50 KHz fish finder was set downwardly on the net pendant right before the front weight to determine the height of weight from the sea bed. The depth of otter board and weight were calculated by subtract the height of those from the depth of water, respectively. To determine the vertical opening of mouth, a transmitter of net recorder was set on the head rope and the vertical opening of that to ground rope was directly read on the recording paper. The results obtained can be summarized as follows: 1. The rate of the depth of otter board to the length of warp was in the range of 0.44 to 0.25, and the depth was linearly shoaled about 5m per 0.1m/sec of the towing speed or per 20rpm of the main engine. The rate of the observed depth to the calculated depth of otter board was in the range of 0.92 to 0.080 with a decreasing tendancy in accordance with the increase of towing speed. 2. The depth of head rope was 2 to 3m deeper than that of otter board, and the vertical opening of net mouth was in the range of 22 to 19m, with a decreasing tendancy in accordance with the increase of towing speed, 3. The difference of depth between front weight and otter board was about 20m and 22m respectively in the length of warp 100m and 150m without distinct change in accordance with the towing speed. The depth of front weight was 2 to 3m shallower than that of ground rope. 4. The changing range of depth of head rope according to the revolution of main engine was about 4m per 20rpm.

• Korean Management Science Review
• /
• v.27 no.1
• /
• pp.91-105
• /
• 2010

We proposed and stratified a selection standard model on Open Source Functional Board which could be found in Web. So we could grasp the weight about Performance Evaluation from the viewpoints of planners, developers, and web disigner professional of views. We suggested applying diverse measurement types in case of item which could chart Evaluation Standards on chosen sample boards. In case of item which couldn't do that, we compared and analyzed it by using selective type of 9 point scaling method on professionalists in every sample board. As a result of weight on upper estimate section of evaluation model chart, the order of importance was convenience(0.334), performance(0.333), function(0.240) and design(0.093) respectively. It indicates that there is more weight on performance and convenience which are hard to be structurally modified than designs and functions that are directly shown to the users. Also, it was evident that opposite results came out when using 9-point scale survey and measurement with objective data such as function and performance. The reason is because the surveyed subject can have his or her own subjectivity and bias unlike objective data. However, objectivity of the administrator is also an important factor thus both two perspectives have to be all considered when selecting the bulletin board.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.384-387
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to moment structures. With like this reason, dry walls we used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are that the structure 1 satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1379-1382
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to moment structures. With like this reason dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-hearing light weight concrete Panel using bottom ash, the Purpose of this study is to obtain basic data for application in the field. The results are that the structure 1 satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.293-295
• /
• 2004

The Engineering Model of on-board computer was developed and tested completely with other sub-systems for STSAT-2. We designed the on-board computer of STSAT-2 which has some improved features compared with that of STSAT-l. A remarkable change is that the on-board computer has a structure of centeralized network communication without a Network Controller of the STSAT-l. That is, the on-board computer directly manages a satellite network. In addition, as many logics are implemented by Field Programmable Gate Array, so we can reduce the weight and size of on-board computer. Also, the developed on-board computer has more improved tolerance against Single Event Upsets and faults than that of the STSAT-l.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.645-648
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to rahmen structures. With like this reason, dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are as follows. structure 1 satisfy domestic standard concerned with sound insulation between households at the laboratory and field test.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.32 no.1
• /
• pp.1-11
• /
• 2016

Tropical tasar silkworm, Antheraea mylitta is a commercial forest silkworm in India that produces tasar silk, but never experimented in Uttarakhand, a Himalayan state of India. A. mylitta express divergent phenotypic characters under different ecological conditions; so, we studied the effect of seven forest tree species in two rearing seasons on variability in silk gland weight of Daba (bivoltine) ecorace of A. mylitta at Forest Research Institute in Dehra Dun, Uttarakhand during 2012 and 2013. We used two-way completely randomized block factorial design and Post HOC Tukey's HSD test to analyse the collected data and there after carried out multiple regression analysis. Results indicated that silk gland weight differed significantly between rearing seasons (DF=1, F=2333.98, p <0.05), host plants (DF 6, F= 1516.25, p <0.05) and their interactions (DF=6, F=7.10, p <0.05). Higher silk gland weight was found in second rearing season than the first on all the host tree species. Terminalia alata fed A. mylitta larvae showed the highest silk gland weight of 8.03 and 9.47 g in first and second rearing seasons, followed by T. tomentosa (7.19 & 9.01g), T. arjuna (6.8 & 8.08 g) and L. speciosa (6.57 & 7.83 g) fed larvae, respectively. Post HOC Tukey's HSD test indicated that silk gland weight of L. speciosa and T. arjuna fed larvae in both the rearing seasons did not differ significantly. E.I. analysis also confirmed that T. alata, T. tomentosa, T. arjuna and L. speciosa are better in their order of merit than T. bellirica , T. chebula and L. tomentosa. Multiple regression analysis indicates that larval weight gain is a strong predictor (β=1.002, t=346.777, p = <0.05) for the silk gland weight of A. mylitta ; however, larval duration had significant negative regression weight (β=-0.270, t=-8.436, p = <0.05) on mean weight of silk gland.