• Biomedical Science Letters
• /
• v.8 no.1
• /
• pp.47-52
• /
• 2002

To investigate an effect of cyclohexanone (CHO) treatment on the serum levels of xanthine oxidase (XO) in liver damaged animals, the rats were intraperitoneally pretreated with 50% carbon tetrachloride ($CCl_4$) in olive oil (0.1 mL/ 100 g body weight) 14 times every other day. To the $CCl_4$-pretreated rats, CHO (1.56 g/kg body weight) was injected once and then the animals were sacrificed at 4 hours after CHO treatment. The increasing rate of serum and liver XO activities to the control was higher in CHO-treated animals pretreated with $CCl_4$ than the $CCl_4$-pretreated those. Concomitantly CHO injection to the $CCl_4$-pretreated animals showed somewhat higher Vmax and lower Km value in the kinetics of liver XO enzyme. Furthermore, increasing rate of hepatic malonedialdehyde content to the control was also higher in CHO-treated animals pretreated with $CCl_4$ than $CCl_4$-pretreated those. On the other hand, the injection of CHO to the $CCl_4$-pretreated animals showed the more enhanced liver damage on the basis of liver function finding; liver weight per body weight (%), serum levels of alanine aminotransferase activity and hepatic glucose-6-phosphatase activity. In conclusion, injection of CHO to the $CCl_4$-pretreated rats led to more increased activity of serum XO and it may be caused by acceleration of hepatocyte membrane permeability and induction of enzyme protein.

• BMB Reports
• /
• v.35 no.2
• /
• pp.220-227
• /
• 2002

Two aspartate aminoransferase (EC 2.6.1.1) isoenzymes (AAT-1 and AAT-2) from Lupinus albus L. cv Estoril were separated, purified, and characterized. The molecular weight, pI value, optimum pH, optimum temperature, and thermodynamic parameters for thermal inactivation of both isoenzymes were obtained. Studies of the kinetic mechanism, and the kinetics of product inhibition and high substrate concentration inhibition, were performed. The effect of some divalent ions and irreversible inhibitors on both AAT isoenzymes was also studied. Native PAGE showed a higher molecular weight for AAT-2 compared with AAT-1. AAT-1 appears to be more anionic than AAT-2, which was suggested by the anion exchange chromatography. SDS-PAGE showed a similar sub-unit molecular weight for both isoenzymes. The optimum pH (between 8,0 and 9.0) and temperature ($60-65^{\circ}C$) were similar for both isoenzymes. In the temperature range of $45-65^{\circ}C$, AAT-2 has higher thermostability than AAT-1. Both isoenzymes showed a high affinity for keto-acid substrates, as well as a higher affinity to aspartate than glutamate. Manganese ions induced an increase in both AAT isoenzymes activities, but no cooperative effect was detected. Among the inhibitors tested, hydroxylamine affected both isoenzymes activity by an irreversible inhibition mechanism.

• YAKHAK HOEJI
• /
• v.31 no.1
• /
• pp.25-32
• /
• 1987

The effect of loading dose, plasticiser and PVA molecular weight on naproxen release from hydrophilic polymer matrix was examined. Hydrophilic polymer matrix was prepared with PVA and PVP by adding glycerine as plasticiser. The release of naproxen from polymer matrix was determined in phosphate buffer medium. The release rate of naproxen from the polymer matrix increased as drug loading dose and plasticiser percentage increased. Raproxen released from the polymer matrix showed the time square root kinetics. Without changing the release-pattern, the release rate of naproxen could not be changed by varying molecular weight of PVA. Linearly released time range increased as drug loading dose increased, whereas decreased as plasticiser percentage increased up to 30%.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.2
• /
• pp.132-138
• /
• 2000

The effect of fluid flow on corrosion and erosion-corrosion of metal is a well-recognized phenomenon in pipelines and machinery equipment, and so on. Not only are fluid hydrodynamics important, but also the corrosiveness of the process or production stream affects the corrosion system. Recent research demonstrates that it is possible to erosion-corrosion(E/C) phenomena in terms of hydrodynamics, electrochemical corrosion kinetics and film growth/removal phenomena. Stress corrosion cracking behavior under cavitation erosion-corrosion of mild steel(SS41) was investigated of base metal and weldment under loaded stress. Main result obtained are as follows : 1) The cavitation erosion sensitivity of base metal affected weight loss is more susceptive than heat affected zone, 2) The corrosion sensitivity affected weight loss of welding heat cycle is less susceptive on stress corrosion under cavitation erosion-corrosion than stress corrosion.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.121-128
• /
• 2018

This paper describes the non-isothermal pyrolysis of cashew shell cake (CSC) - bituminous coal blends. The blends exhibit two distinct stages in the thermogravimetric curves, which the first stage stems from CSC and the second one from the superposition of CSC and coal pyrolysis. The pyrolysis behavior of the blend was linearly proportional to the blending ratios. The overall behavior of the blends was evaluated in terms of the maximum rate of weight loss, characteristic temperatures, char yields, and the calculated and experimental thermogravimetric curves. The activation energies ranged up to 49 kJ/mol for the blends were obtained and used to evaluate the interaction in the blends. The present thermogravimetric study shows that there is no significant interaction between CSC and coal in the blends, and it was supported by the characteristic values which are linearly proportional to the weight percentages of cashew cake-shell in the blends. The no-interaction might be due to the fact that the main reaction zones are distinctively different for two constituents, so the additive rule is acceptable for describing pyrolysis behavior of the present blends.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.1
• /
• pp.37-41
• /
• 2004

The removal efficiency of cadmium by chitosan complex isolated from Aspersillus oryzae was investigated through laboratory experiments. The results of the study are as follows. The adsorption kinetics of cadmium was reached the adsorption equilibrium in approximately 20 minutes and the removal efficiency was showed 95.8%. The effect of temperature on cadmium adsorption by chitosan complex shows that as the temperature increased, the amount of cadmium adsorption per unit weight of chitosan complex increased. The correlation between amount of cadmium adsorption per unit weight of chitosan complex and temperature was obtained through the coefficient of determination($R^2$). $R^2$ values was 0.854(p<0.05). A linearized Freundlich equation was used to fit the acquired experimental data. As a result, Freundlich constant, the adsorption intensity(1/n) was 0.550, and the measure of adsorption(k) was 2.181. So, it was concluded that adsorption of cadmium by chitosan complex is effective.

• Advances in Traditional Medicine
• /
• v.6 no.4
• /
• pp.300-305
• /
• 2006

Pethidine at the dose level of 0.5 mg and 0.75 mg/100 g body weight administered for 20 days to the cycling albino rats caused decrease in the ovarian weight and its protein content. The ovarian folliculogenesis in treated rats is hampered; as a result the follicles which are at the different stages of growth underwent regression. Therefore, the number of healthy follicles is reduced and atretic follicles increased. The elevated levels of ovarian cholesterol and decreased level of glycogen in the pethidine treated rats indicates the inhibition brought in steroidogenesis, which is dependent on pituitary gonadotrophins.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.719-726
• /
• 2006

Adsorption isotherms and kinetics for taste and odor (T&O) compounds and natural organic matters (NOMs) were performed to evaluate the impacts of activated carbon particle size on coagulation and adsorption. Adsorption capacities for iodine, T&O compounds, and NOM of all the activated carbons under #325 mesh were more excellent than those of virgin activated carbons. Small activated carbon particles were more rapidly adsorbed low molecular weight T&O compounds in the water, while those were slowly adsorbed high molecular weight NOM. When the activated carbon and alum were added simultaneously, the adsorption capacity for organics was better than alum was added alone.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.112-122
• /
• 1998

In recent years the accumulation of heavy metals in microorganisms, the biosorption has received much attention because of various environmental application. We have been to research the biosorption characteristics using algae, Spirulina, for the removal of heavy metal ions in industrial and polluted waters. In the adsorption of single heavy metal ions, the adsorption equilibrium was reached within 10min., and optimum pH and reaction temperature were 4.5-5 and 30-35$\circ $C, respectively. Under the above conditions, the maximum amounts of Pb, Cu, and Cd adsorbed to the unit weight of Spirulina were 107.6mg/g, 78.0mg/g, and 65.6mg/g, and three values were 1.45, 1.56, and 1.26 times higher than those adsorbed to the unit weight of activated carbon under same conditions. The adsorption kinetics of Pb, Cu, and Cd were fitted very well to the Freundlich isotherm and BET isotherm. Biosorption experiments in single ion solutions and binary ions solutions showed higher removal efficiency in the single ion solutions than in binary ions solutions.

• YAKHAK HOEJI
• /
• v.29 no.2
• /
• pp.70-75
• /
• 1985

The influence of polyethylene glycol derivatives on heparin release from cylindrical monolithic type silicone segment devices was examined in physical saline solution. This water-soluble carrier caused the devices to absorb the water in aqueous media. The release rate of heparin from the devices was increased as molecular weight of polyethylene glycol was increased. Water soluble carrier incorporated into silitone segment devices permits controlled release of heparin that otherwise would be released extremly slowly from the polymer. Heparin released from the silicone segment containing polyethylene glycol showed the first-order kinetics. Without changing the release-pattern, the release rate of heparin could be controlled by varing molecular weight of polyethylene glycol, the water-soluble carrier and depleting polyethylene glycol on the outlayer of devices. The mechanism of release probably showed the creation of pore or microdomine through the devices secondary to the swelling.