• 한국노년학
• /
• v.29 no.4
• /
• pp.1479-1500
• /
• 2009

This study examined BMI distributions among older adults in three different countries: the U.S., Japan, and Korea. The paper also explored differences in the factors predicting BMI in the three countries using three data sets: the U.S. Longitudinal Study of Aging (LSOA II, 8,589 persons), the Nihon University Japanese Longitudinal Study of Aging (NUJLSOA, 2,888 persons), and the Korean Longitudinal Study of Ageing (KLoSA, 2,397 persons). Descriptive analysis and multiple regression were performed. Japanese older adults were somewhat lighter than Koreans with fewer people at the upper end of the BMI distribution. Distributions of BMI among both Koreans and Japanese are shifted leftward relative to Americans. There is less dispersion in the distribution of BMI for Koreans and Japanese than among Americans. The association between socioeconomic variables and BMI is stronger in the U.S. and Japan than in Korea. Demographic variables are strong predictors of BMI in Korea. In Japan, all health behaviors have significant effects on BMI. It is concluded that the relationships between behavioral, demographical, and socioeconomic factors and BMI are not the same across countries. Results have policy implications for the involvement of health practitioners in helping older adults to control weight.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.371-378
• /
• 2008

Bio-diesel applications seem to be extended due to bio-diesel policies and changes of agricultural environment. This study was conducted to develop a rapeseed reaping equipment attachable to the conventional combine. This paper was intended to report concept design, process and manufacturing of the prototype rapeseed reaping equipment. For concept design, physical properties of "SUNMANG", which is a typical rapeseed as bio-diesel materials, were considered. The designed prototype rapeseed reaping equipment consisted of wide-width plates, finger type knifes, side cutter knifes and drive equipments. The wide-width plate is 2.1 m wide, 0.7 m long, and 0.002 m thick. The finger type cutter knifes have 14.5 fingers, 30 knifes, and the specification was 7.6 cm of pitch, 8.3 cm of length and $21^{\circ}$ of cutting angle. The side cutter knifes consisted of a hydraulic pump, a hydraulic motor, a flow control and a relief valve, a hydraulic hose, a driving equipment and a reciprocating cutter knife. The 18 reciprocating cutter knifes were 137 cm long and knife pitch, knife length and cutting angle were 7.7 cm, 10.5 cm, and $18^{\circ}$. Prototype weight of the rapeseed reaping equipment was heavier by 272 kg when compared with the manual reaping equipments. Load distributions of left and right side showed 50% and 49%, and those of front and rear side showed 64% and 36%. Static turn-over angles in left and right of the prototype were $38.1^{\circ}$ and $38.7^{\circ}$, respectively. The designed prototype rapeseed reaping equipment was properly mounted at the front of a conventional combine.

• Journal of Plant Biology
• /
• v.26 no.1
• /
• pp.17-32
• /
• 1983

The aboveground production, nutrient distribution and nutrient cyclings were compared between two Phragmites communis communities growing in the different salt contents of soil in a coastal salt marsh. Inorganic nutrient contents of soil for plant growth were greater at the low salt stand than at the high salt stand except for sodium(Na). Maximum aboveground biomass of the plant at the low and the high salt stands were 2,533 and 1,719 g dw/$m^2$, respectively, in August. Seasonal changes of nutrient content of biomass in dry weight decreased with growth except for Na. Nutrient contents in biomass per unit land area increased continuously as biomass increases, although the amount of potassium(K) reached the maximum content in July and thereafter decreased. Vertical distributions of total nitrogen(T-N) and phosphorus(P) increased with plant height, but Na showed the reverse trend. That of K was similar to the patterns for T-N and P in the leaves, and to the pattern of Na in the stems. The Na was greatly accumulated in underground biomass but transported scarcely to aboveground. At the low and the high salt stands, the ratios of the inorganic nutrients contained in the plant were 100 : 66 for T-N, 100 : 61 for P, 100 : 62 for K and 100 : 97 for Na. the ratios of the amounts of nutrients retrieved to soil were 100 : 242 for T-N, 100 : 408 for P, 100 : 127 for K and 100 : 269 for Na, respectively. Turnover times of the T-N, P, K and Na in the communities were 56, 1, 15 and 174 years at the low salt stand, and 75, 2, 24 and 323 years at the high salt stand, respectively. In nutrient cyclings, all of the nutrients retrieving to soil were less than uptake by plant. Among the nutrient, especially P is expected to be exhausted from soil, sooner or later, because of the harvest by men.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.20-28
• /
• 1992

The x-ray fluorescence(XRF) is one of the most convenient and widely used techniques for analyzing trace elements in ambient particulate matters. The objects of the study were to estimate the optimum exposure time using the XRF, to investigate the distributions of heavy metal levels in particulate matters, and finally to study seasonal variation for the concentrations of total suspended particulate matters(TSP) and size fractionated particulate matters. The suspended particulate matters had been collected by a cascade impactor having 9 size fragnated stages for 3 years(Dec. 1988 to Nov. 1991) in Kyung Hee University-Suwon Campus. The particulate matters were then collected on each stage by membrane filters. The weight concentrations were determined by the XRF system. Thus, seasonal variations and relationship between concentration and particle size could be investigated. Resulting distribution was bimodal with the coarse and the fine particle groups minimum occurring around 2.1 to 3.3 $\mu$m as an aerodynamic diameter. To determine optimum exposure time of the XRF for various trace inorganic elements, membrane filters and the NIST standard filters were extensively studied. Using a statistical technique, optimum exposure time was estimated for each trace element and overall elements. The time was then determined as 20 seconds for the XRF system. The concentration of TSP was 123.9$\mum/m^3$ on an arithmatic average. The levels of each inorganic metal were Si 2420.0ng/$m^3$, Fe 977.1ng/$m^3$, and so on. The Pb. Zn, and Cu abounded in the fine mode group, while Ca, Fe, Si, Al, and K in the coarse group. Marked seasonal variation of TSP and metal concentrations was observed. The concentration of heavy metals in the fine mode was highest in winter : on the other hand, that in the coarse mode was highest in spring.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.3
• /
• pp.133-149
• /
• 1975

1. A quantitative ecological investigation of the intertidal sand beach at Yong-ho Bay, located about 6km NE of Busan Harbour was carried out from February, 1974 to February, 1975. Composition of the fauna, diversity, faunal affinity and distributions in time and space were studied. Some ecological factors influencing to the community also discussed. 2. The beach can be classified as a fine-sand beach which is dominated by Armandia lanceolata and Nephtys sp. (A). Thirty two species of animals representing 29 genera were found. In number, two polychaetes, A. lanceolata and Nephtys sp. (A) were dominant, while one polychaete, Neanthes japonica and one bivalvia, Laternula limicela were dominant in weight. 3. Distribution of the fauna was devided into three areas of different faunal compositions with sediment types particularly by mud fraction content, and it well agreed with faunal affinity and diversity index value. 4. Seasonal fluctuation of the three dominant species, A. lanceolata, Nephtys sp. (A) and N. japonica was studied. Except Nephtys sp. (A), the fluctuation were closely related to the brooding time. 5. There was no relationship between faunal distribution and organic matter content. Submergence time affected the distribution of some species but the influence to the whole-community was little.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.71-74
• /
• 1994

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony ingrowth and secondary long term fixation. Bone ingrowth depends strongly on relative micromotion and stress distributions at the interface. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone-prosthesis interface, Hence an accurate evaluation of interface behavior and stress/strain fields in the bone implant system may be relevant for better understanding of clinical situations and improving THA design. However, complete evaluation of load transfer in the bone remains difficult to assess experimentally, Hence, recently finite element method (FEM) was introduced in orthopaedic research field to fill the gap due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional numerical finite element model which is composed of totally 1179 elements off and 8 node blick. We also analyzed the micromotions at the bone-stem interface and mechanical behavior of existing bone prosthesis for a loading condition simulating the single leg stance. The result indicates that the values of relative motion for this well fit Multilock stem were $150{\mu}m$ in maximum, $82{\mu}m$ in minimum, and the largest relative motion developed in medial region of proximal femur with anterior-posterior direction. The proximal region of the bone was much larger in motion than the distal region and the stress pattern shows high stress concentration on the cortex near the tip of the stem. These findings indicates that the loading in the proximal femoral bone in the early postoperative situation can produce micromotions on the interface and clinically cementless TEA patient should not be allowed weight bearing strictly early in the postoperative period.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.5
• /
• pp.798-804
• /
• 2015

The distributions of demersal fish along the coast of the South Sea, Korea, were estimated from a hydroacoustic survey and bottom trawl catches in April of 2015. Acoustic data were collected at 38 kHz, and converted into the nautical area scattering coefficient (NASC, m²/n·mile²) for 0.1 n∙mile along eight transects during day and nighttime. Various demersal fish species were collected and the dominant species comprised no more than half of the catch. The estimated acoustic density of demersal fish compared well with the cumulative catch weight from bottom trawl catches in daytime, but showed a low correlation at nighttime. The NASC of pelagic fish determined for anchovy was correlated with water temperature. The combined hydroacoustic and trawl method can be used to understand the spatial/temporal structure and estimate the density of demersal fish in coastal areas.

• The Korean Journal of Applied Statistics
• /
• v.31 no.5
• /
• pp.621-636
• /
• 2018

Research on the application of informative sampling technique has been conducted in order to reduce the influence of non-response. Chung and Shin (Korean Journal of Applied Statistics, 30, 993-1004, 2017) showed that the estimation accuracy improved when using exponential response rate information for the parameter estimation if the distribution of errors included in the super population model follows normal distribution. However this method divides the stratum into equally spaced substrata to obtain the sample weight of the informative sampling technique and shows that the accuracy of the estimation improves as the number of substrata increases. In this study, with the given number of total sample size, the optimal substratum boundary points are calculated using equal space, quantile, and LH algorithm; consequently, the results using those methods are compared through simulation. We also studied the criteria to determine the number of substrata and substratum boundaries that can be used in practice with various types of auxiliary variable distributions.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.458-462
• /
• 2009

We have synthesized ABC linear triblock copolymers, i.e., polystyrene-b-poly(ethylene oxide)-b-polylactide, via sequential anionic and ring-opening polymerizations. In the first anionic polymerization step, styrene was polymerized in cyclohexane using sec-butyllithium as the initiator. Poly (styryl) lithium was hydroxylated by the addition of ethylene oxide, and the subsequent protonation with methanolic HCl. In the second anionic polymerization step, potassium naphthalenide was used to deprotonate the hydroxyl group of the PS to generate the macroinitiator of PS-$O^-K^+$. Polymerization of ethylene oxide was performed in THF and terminated with methanolic HCl. In the ring-opening polymerization step, the PS-b-PEO-$AlEt_2$ macroinitiator was prepared from an $AlEt_3$/pyridine system in THF, and the polymerization of lactide was performed at $90^{\circ}C$. The resulting block copolymers showed well-defined molecular weights and narrow molecular weight distributions as revealed by $^1H$- NMR spectroscopy and gel permeation chromatography (GPC).

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.1
• /
• pp.67-78
• /
• 2005

We proposed a blind watermarking for 3D mesh model using the patch CEGIs. The CEGI is the 3D orientation histogram with complex weight whose magnitude is the mesh area and phase is the normal distance of the mesh from the designated origin. In the proposed algorithm we divide the 3D mesh model into the number of patch that determined adaptively to the shape of model and calculate the patch CEGIs. Some cells for embedding the watermark are selected according to the rank of their magnitudes in each of patches after calculating the respective magnitude distributions of CEGI for each patches of a mesh model. Each of the watermark bit is embedded into cells with the same rank in these patch CEGI. Based on the patch center point and the rank table as watermark key, watermark extraction and realignment process are performed without the original mesh. In the rotated model, we perform the realignment process using Euler angle before the watermark extracting. The results of experiment verify that the proposed algorithm is imperceptible and robust against geometrical attacks of cropping, affine transformation and vertex randomization as well as topological attacks of remeshing and mesh simplification.