• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1340-1345
• /
• 2018

Mo-10 at.% Cu nanocomposite powders were fabricated by using planetary ball-milling (PBM), a mechanical alloying technique for preparing nanocomposite alloy powders of metals with mutual insolubility, and the variations in the physical and the chemical characteristics with the process conditions were investigated. We observed that Mo-10 at.% Cu was an appropriate composition to ensure a good alloying grade and minimal welding between particles. The influences of the temperature and the milling conditions on the mechanical alloying process and the phase change of Mo-10 at.% Cu composite powders were investigated, and the particle and the grain sizes of the powders after mechanical alloying were confirmed. The Mo-10 at.% Cu powders showed homogeneous elemental distributions and no phase changes up to $1200^{\circ}C$; their compositions were retained after the mechanical alloying process. The finest grain size obtained was about 5 nm for powders processed using optimum PBM processing conditions: ball-to-powder weight ratio of 5 : 1, ambient air atmosphere, a milling time of 20 h, a rotation speed of 200 rpm, and a stearic acid content of 4 wt.% produced superfine-grained Mo-10 at.% Cu nanocomposite powders with an average grain size of 5 nm (which is smaller than that of other similar materials reported in the literature). The analytical results confirmed that the PBM technique presented here is a promising method for preparing superfine-grained Mo-10 at.% Cu powders with improved properties.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.5 no.2
• /
• pp.35-45
• /
• 2007

The purpose of this study was to examine spiral way movement of a trunk exerts on the movement ability. The details established to achieve for this article. This examination confirmed the weight, weight/height2 index, ratio of lumbar to pelvic, musculoskeletal quantity, push up for 2 minute, pitch a ball and voluntary isometric contraction with flexion and extension of knee joint of the subjects with spiral direct movement. Healthy eighteen subjects who understand fully the significance of procedure, consented to a plan, without neuromuscular disease were participated in two groups of experiment. The group were a spiral movement(9), rectilinear movement(9). Trunk movement tested 2 sessions of a spiral movement and rectilinear movement with a push up for 2 minute, 5days per a week, for the 4 weeks. This experiment tested 3 times with a sufficient rest for fatigue limitation. An analysis of the results used a paired samples t-test for difference from before and after experiment. The following results were obtained; At an internal change of the body, the musculoskeletal quantity was increased significantly to spiral movement group, but the weight was increased significantly, the musculoskeletal quantity was not significant to rectilinear movement. The movement ability evaluation for a external change was increased significantly in a push up for 2 minute, pitch a ball, isometric contraction with extension of knee joint of a spiral movement group, but a push up for 2 minute was increased significantly in a push up for 2 minute on the abdominal muscle training of a rectilinear movement group. As compared with a rectilinear movement, a spiral movement was more effect by cooperation with nerve and musculoskeletal system and an increase in movement ability was caused by learning acknowledgment, muscular reeducation. These results lead us to the conclusion that a spiral movement of trunk was more effect than a rectilinear movement, the coordination of nerve and musculoskeletal system was of importance of Multi-direction movement. Therefore, A further studies concerning the therapeutic exercise intervention and active-dynamic analysis could enhance the development of the most effect on the trunk.

• The Journal of Korean Physical Therapy
• /
• v.24 no.5
• /
• pp.300-305
• /
• 2012

Purpose: This study examined the muscle activity of the trunk muscles during weight shifting exercises on a stable and unstable surface. Methods: Ten healthy young subjects (4 males, 6 females) with no medical history of lower-extremity or lumbar spine disease were enrolled in this study. The muscle activity was recorded using surface electromyography (EMG) electrodes from the both sides of the external obliques and erector spinae muscles. Results: The EMG activities of the both rectus abdominalis, both external obliques and erector spinae muscles were significantly higher when the weight shifting exercise was performed on a firm surface than when a balance pad with a balance ball was used. In weight shifting exercises, the EMG activity of the contralateral external obliques and erector spinae muscles was significantly higher than that of the ipsilateral external obliques and erector spinae muscles under all three support surface conditions. Conclusion: Performing weight shifting exercise using an unstable surface is a useful method for facilitating the trunk-muscle strength and trunk stability.

• Tribology and Lubricants
• /
• v.16 no.6
• /
• pp.461-468
• /
• 2000

In this study, a neural network based diagnostic system of a rotating spindle system supported by ball bearings was introduced. In order to create actual failure situations, two exemplary abnormal status were made. Out of several possible data source locations, ten measurement spots were chosen. In order to discriminate multiple abnormal status, a neural network system was introduced using back propagation algorithm updating connecting weight between each nodes. In order to find the optimal structure of the neural network system reducing the information sources, magnitude of the weight of the network was referred. Hinton diagram was used to visually inspect the least sensitive weight connecting between input and hidden layers. Number of input node was reduced from 10 to 7 and prediction rate was increased to 100%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.969-973
• /
• 2007

The heavy-weight floor impact sound field of the receiving room in a testing building with bearing wall structure was investigated using bang machine and impact ball. The sound field was investigated through the impact sound pressure level distribution by the field measurement and computational analysis. Predicted sound field using the computational analysis agree with measurement result in the low frequency band. Result shows that standard deviations of the single number rating value are about 2dB in each impact source. Particularly, impact sound pressure level at 120cm height in 63Hz octave band was 5dB lower than spatial averaging value. It was found that receiving positions in the ministry of construction and transportation notice should be reconsidered.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.99-106
• /
• 1999

Ultra-high molecular weight polyethylene (UHMWPE) was crosslinked in the melt state to enhance wear resistance, Dicumyl peroxide (DCP) and triallyl cyanurate (TAC) was used as a crosslinking agent and a promoter, respectively. With increasing amount of DCP and TAC used, gel content of crosslinked UHMWPE (XUMPE) increased, while the melting temperature, crystallizaiton temperature, crystallinity, and tensile properties decreased. The results of pin-on-disk wear test and ball-on-disk test with small applied load showed reduced wear volumes of XUMPE from that of the unmodified UHMWPE. As the wear mechanism effected in the experimental condition of this study was thought to be deformation rather than adhesion or fatigue, a new parameter, the ratio of maximum contact stress to yield stress, was proposed to correlate well with observed wear resistance. In ball-on-disk wear test with larger applied load, XUMPE showed higher wear volumes than that of the unmodified UHMWPE which were accompanied with increased friction coefficients and surface roughness of the wear tracks. When contact stress was well above yield stress, the failure of XUMPE, as well as deformation, was thought to be much accelerated.

• Korean Journal of Poultry Science
• /
• v.10 no.2
• /
• pp.123-128
• /
• 1983

Fifty of one day-old chicks of silky fowl were hatched at Dept. of Animal Science, Gyeongsang National University and fifty of one day-old chicks of quails were hatched at Gim Hae, Gyung Nam. This experiment was investigated at 24 hours after incubation. Twee items investigated in this experiment were the live weights, the weights of head, eye-ball, brain, heart, liver, lung, kidney, stomach, small intestine, large intestine, and yolk sac. The results obtained are summarized as follows; 1, Average weights of body, head, eye-ball brain, heart, liver, lung, kidney, stomach, small intestine, large intesine and yolk sac of the quail chicks and standard errors were 6.54${\pm}$0.02g, 1.38${\pm}$0.l3g, 0.29${\pm}$0.004g, 0.24${\pm}$0.006g, 0.08${\pm}$0.002g, 0.21${\pm}$0.005g, 0.06${\pm}$0.002g, 0.05${\pm}$0. 002g, 0.46${\pm}$0.010g, 0.24${\pm}$0.008g, 0.10${\pm}$0.004g, and 0.28${\pm}$0.0l6g, respectively. 2. Average weights of body, head, eye-ball, brain, heart, liver, lung, kidney, stomach, small intestine, large intestine, and yolk sac of the silky fowl chicks and standard errors were 26.60${\pm}$0.491g, 4.28${\pm}$0.071g, 0.64${\pm}$0.039g, 0.55${\pm}$0.025g, 0.21${\pm}$0.0l2g, 0.77${\pm}$0.030g, 0.13${\pm}$0.006g, 0.08${\pm}$0.006g, 1,53${\pm}$0.076g 0.73${\pm}$0.036g, 0.42${\pm}$0.031g, and 2.65${\pm}$0.297g, respectively. 3. The relative ratios of the organ weight versus body weight in guails were compared with those of the commercial chicks (Hibro, Hubbard, and Hisex) and silky fowls. It was noted that the relative weights of the brain and eye ball with respect to body weight were larger in case of quails (Table 3). The weights of heart, liver, lung, kidney, stomach and small intestine in silky fowl were smaller than those of commercial chicks and quail chicks. Other items were similar in weight to commercial chicks ana quail chicks.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.84.4-84
• /
• 2002

$\textbullet$ To achieve 3 high power-to-weight ratio, design of 3DOF hip module $\textbullet$ Using parallel mechanism and linear actuator consist of a ball-screw mechanism $\textbullet$ The kinematics analysis for the hip module $\textbullet$ A kinematic index to measure actuator power are introduced. $\textbullet$ It is demonstrated throught simulation that incorporation of redu ndant actuator into the hip module

• Communications of the Korean Mathematical Society
• /
• v.26 no.2
• /
• pp.215-227
• /
• 2011

In this paper we introduce a class $h^{-\infty}_{\Phi}(\mathbb{B})$ of weighted spaces of harmonic functions in the unit ball $\mathbb{B}$ of $\mathbb{R}^n$. We dene weakly sufficient sets in this space and give an explicit construction of countable sets of such a type. Various examples of weight functions are also discussed.

• Journal of the Korean Mathematical Society
• /
• v.49 no.4
• /
• pp.829-842
• /
• 2012

In this paper, we give the condition for the boundedness of the Berezin transforms on Herz spaces with a normal weight on the unit ball of $\mathbb{C}^n$. And we provide the integral estimates concerning pluriharmonic kernel functions. Using this, we finally obtain the growth estimates of the Berezin transforms on such Herz spaces.