• 한국식품영양과학회지
• /
• 제44권12호
• /
• pp.1856-1864
• /
• 2015

본 연구는 춘천지역 대학생 306명(남 175명, 여 131명)을 대상으로 성별에 따른 영양소 섭취 상태를 알아보았으며, 그 결과는 다음과 같다. 평균 나이는 남학생이 $21.1{\pm}2.9$세, 여학생이 $20.3{\pm}2.2$세였고(P<0.05), 평균 신장과 체중은 남녀 각각 $175.2{\pm}6.2cm$와 $68.2{\pm}9.9kg$, $161.7{\pm}5.2cm$와 $55.1{\pm}6.5kg$으로 나타났으며(P<0.001), 평균 BMI는 남녀 각각 $22.2{\pm}2.8$과 $21.1{\pm}2.1$로 나타났다(P<0.001). 끼니별 결식률은 남녀 모두 아침결식률(31.7%, 29.2%)이 가장 높게 나타났다. 성별에 따른 영양소 섭취 상태를 알아본 결과, 1일 평균 에너지, 탄수화물, 단백질, 지방은 남학생이 여학생보다 유의적으로 높게 섭취하였다(P<0.001). 또한 비타민 A와 C를 제외한 비타민 $B_1$(P<0.001), 비타민 $B_2$(P<0.01), 나이아신(P<0.001), 비타민 $B_6$(P<0.001), 비타민 E(P<0.001), 엽산(P<0.01), 칼슘(P<0.05), 인(P<0.001), 철분(P<0.001), 아연(P<0.001), 나트륨(P<0.001), 콜레스테롤(P<0.001)도 남학생이 유의적으로 높게 섭취하였다. 주중과 주말의 영양소 섭취 상태는 남학생이 1일 평균 에너지(P<0.01), 탄수화물(P<0.01), 단백질(P<0.05), 지방(P<0.01), 비타민 $B_1$(P<0.01), 나이아신(P<0.01), 비타민 $B_6$(P<0.01), 비타민 E(P<0.01), 철분(P<0.05), 아연(P<0.01), 나트륨(P<0.05)을, 여학생은 지방(P<0.05), 비타민 E(P<0.05), 칼슘(P<0.01), 철분(P<0.01)을 주말에 비해 주중에 유의적으로 높게 섭취하였다. 에너지 섭취량에 대한 탄수화물, 단백질, 지방의 섭취비율은 남학생이 57.8:15.3:26.8, 여학생이 58.5:15.1:26.2로 나타나면서 서로 유사한 결과를 보였다. 성별에 따른 한국인 영양섭취기준에 대한 섭취비율을 보면 권장섭취량과 충분섭취량 이상 섭취한 영양소는 남학생의 경우 단백질, 비타민 $B_1$, 인, 철분, 나트륨이었으며, 여학생은 단백질, 비타민 A, 인, 나트륨으로 나타났다. 남학생의 에너지 필요추정량에 대한 섭취비율은 69%, 여학생은 70%였으며, 남학생은 비타민 $B_2$, 비타민 C, 칼슘을, 여학생은 비타민 C, 철분, 칼슘을 권장섭취량의 80% 이하로 섭취하고 있었다. 주중과 주말의 영양섭취기준에 대한 섭취비율을 살펴보면 남학생은 비타민 $B_6$와 아연을, 여학생은 칼슘과 철분을 주중에 비해 주말에 상대적으로 부족하게 섭취하였다(P<0.01). 성별에 따른 EAR 미만 섭취자 비율은 남학생이 칼슘(81.7%), 비타민 $B_1$(69.4%), 비타민 C(64.9%), 비타민 $B_6$(53.7%)를, 여학생은 칼슘(75.4%), 비타민 C(64.6 %), 철분(60.8%), 비타민 $B_6$(58.5%), 비타민 $B_2$(55.8%), 나이아신(53.5%), 엽산(51.9%)이 50%를 넘어 영양소의 섭취량이 매우 낮음을 알 수 있었다. 이상의 연구 결과에서 대학생들의 높은 아침결식률, 남학생이 여학생에 비해 높은 영양 섭취를 보이고 있었으나 전반적으로 대학생들의 에너지 섭취 수준은 낮았으며 특정 영양소, 특히 칼슘, 비타민 C, 철분, 비타민 $B_2$ 등의 영양 섭취 상태가 나쁜 것으로 나타났다. 또한 아침결식률과 영양 섭취 상태는 주중보다는 주말에 문제가 있는 것으로 나타나 불규칙한 생활 패턴에 따른 식습관 개선이 시급한 상황이다. 따라서 규칙적인 식생활 및 균형 잡힌 식습관 등에 대한 정확한 이해와 함께 식태도가 긍정적인 방향으로 변화되어 대학생들이 건강과 영양 상태 향상에 도움이 되는 행동을 자발적으로 습득할 수 있도록 영양교육의 필요성이 절실히 요구되는 바이다. 한편 본 연구는 표본의 대상이 춘천지역 일부 대학생이기에 연구 결과를 일반화시키는 데 어려움이 있다. 또한 영양소 섭취 상태의 분석 자료로 사용된 24시간 회상법은 자기기입방법으로 정확한 섭취량을 측정하기 어려운 점이 있어 본 연구의 영양소 섭취 상태와 국민건강영양조사 결과에 차이를 보인 것으로 생각된다. 그러나 본 연구는 개인의 영양 상태 평가가 아닌 집단 간의 비교이고, 개인별 일일 식품 섭취의 편차를 최소화하기 위해 주중과 주말이 포함된 4일 간의 조사를 실시하였기에 다른 지역 및 연령대와의 비교나 특성 연구 시 기초자료로 활용될 수 있을 것이다.

• 핵의학기술
• /
• 제13권1호
• /
• pp.77-81
• /
• 2009

PET/CT (Positron Emission Tomography/ Computed Tomography)의 PET은 생체의 생리, 화학적인 정보를 정량적으로 영상화할 수 있지만 해부학적인 구조를 명확히 나타내는 데에는 한계를 가지고 있어 PET에 CT를 접목시켜 해상력을 높임은 물론, CT 데이터를 감쇠보정에 이용하여 촬영시간도 단축시키고 잡음제거 측면에서도 우수함을 나타내고 있다. 또한 CT 검사 시 조영제를 사용함으로써 병변의 정확한 범위를 확인하고 정상 구조물을 구별하는데 용이하여 조영제의 사용이 증가하고 있는 추세이다. 하지만 조영제를 사용한 경우 CT 영상의 보정에 따라 PET/CT 영상에서 표준화섭취계수(Standardized Uptake Value: SUV)에 영향을 미치기 때문에 본 연구에서는 조영제 보정에 따라 표준화섭취계수(SUV)에 미치는 정도를 평가하였다. 2008년 4월에서 7월 사이에 본원에서 PET/CT검사를 시행한 환자 중 요오드 조영제에 대한 부작용이 없고 당뇨병이 없는 환자 30명을 대상으로 (남: 20, 여: 10, 연령범위: 연령범위 27세~72세, 평균나이 49.6세) 후향적 조사를 하였다. 장비는 DSTe (General Electric Healthcare, Milwaukee, MI, USA)를 사용하였다. 검사자에게 $^{18}F$-FDG 370~555 MBq를 몸무게에 따라 주사하였으며, 1시간 정도의 안정된 자세를 취한 후 검사를 시행하였다. CT촬영은 140 kV, 210 mA로 설정하였으며 CT 검사에 사용되는 조영제의 양은 환자 몸무게 1 kg당 2 cc를 주입하였다. 검사 후 최초 획득 데이터(raw data)를 이용하여 조영제 영향을 보정한 CT데이터와 보정을 하지 않은 CT데이터로 감쇠보정을 하여 영상을 얻었으며 각 영상의 간, 심장, 폐에 관심영역(Region of Interest: ROI)를 그려 SUV를 측정하여 비교하였다. SUV를 측정한 결과 조영제 보정을 한 영상의 표준화섭취계수(SUV)가 줄어듦을 알 수 있었다. 조영제에 대한 영향이 거의 없는 폐에서는 수치적인 변화가 거의 나타나지 않았으며 통계적으로도 유의하지 않았다. 비교적 혈류가 풍부한 간과 심장에서 조영제 보정으로 인한 표준화 섭취계수(SUV) 값이 수치적인 차이를 보였으나 간에서만 통계적으로 유의했다. PET/CT 검사에서 조영제의 사용으로 인하여 검사하고자 하는 부위의 대조도를 증강시켜 진단의 효율성을 높이고 있지만 이로 인하여 표준화섭취계수(SUV)의 증가가 일어난다. 따라서 조영제를 사용한 CT로 감쇠보정을 할 경우에 조영제의 영향에 대한 보정을 해주어 고해상력의 해부학적 영상뿐만 아니라 신뢰를 할 수 있는 반정량적 방법으로 진단적 가치를 더욱 높일 수 있을 것이며 다른 장기에 대해서도 추가적인 연구가 필요하다고 생각된다.

• 한국식품영양과학회지
• /
• 제32권5호
• /
• pp.715-722
• /
• 2003

본 연구에서는 산화, 변성되기 쉬운 비타민 C와 유산균을 캡슐화하여 비타민 C의 활성을 유지시킴은 물론 유산균에 보호막을 씌움으로써 불활성화를 방지하고자 하였다. 녹차잎과 캡슐화한 비타민 C, 유산균 및 실크 펩타이드, 다시마, 차전자피, 알로에 등의 섭취가 체지방 감소 및 체중 감량에 미치는 효과를 확인하고자 여대생 34명을 대상으로 2002년 8월부터 2002년 11월까지 3개월 동안 실시하였으며, 그 결과를 요약하면 다음과 같다. 실험군의 평균 연령은 20.3세, 평균신장은 162.5 cm, 평균 체중은 57.9 kg, BMI 평균은 21.9 였다. 총열량 섭취량은 보충 전.후에 유의적인 차이는 나타나지 않았으며, 당질 섭취량은 보충 전보다 보충 후에 유의적으로 감소하는 경향으로 나타났으며 (p<0.05), 단백질과 지방의 섭취는 보충 전후에 따른 유의적인 차이는 나타나지 않았다. 식이 섬유소 섭취의 경우 보충 전에 비해 보충 후에 유의적으로 증가한 것으로 나타났다(p<0.001). 각 주별 체중 및 BMI의 변화는 유의적인 차이는 나타나지 않았으나 보충 전에 비하여 보충 후에 2.5 kg 정도 감소하는 것으로 나타났다. 체지방량 변화는 보충 전에 비해 보충 4주군에서 유의적인 감소가 나타나(p<0.05) 보충 전에 비해 보충 4주 후 2.0 kg정도 감소하는 것으로 나타났으며, 체지방율 변화 역시 보충 전보다 보충 4주 후에 유의적인 감소 경향이 나타나(P<0.05) 보충 전에 비해 보충 후 1.9%의 체지방율 감소가 나타났다. 허리-엉덩이 둘레 비율(WHR)의 변화는 보충 전에 비해 보충 4주군에서 유의한 감소 경향이 나타났다(p<0.05). 보충 전.후의 총 콜레스테롤과 중성지방의 변화는 보충 후에 유의적으로 감소하는 것으로 나타났으며 (p<0.001), LDL-cholesterol, HDL,-cholesterol 및 LDL/HDL ratio는 보충 전.후에 따른 유의적인 차이는 나타나지 않았다. 이상의 결과를 토대로 보면 본 연구에서 한달 동안 일상식이를 섭취하면서 녹차와 실크 펩타이드와 식이 섬유소의 보충은 체지방을 낮추는 역할을 하였으며, 총 콜레스테롤과 중성 지방 수준의 감소 효과를 알 수 있었다. 또한 산화, 변성되기 쉬운 비타민 C와 유산균을 캡슐화하여 비타민 C의 항산화 기능으로 혈청 지질 개선에 유의적이었으며, 정장 작용을 도움으로써 체중 감소에 효과적인 것으로 사료된다. 특히 신체의 부위 중 복부의 지방을 감소시켜 복부 비만의 관리 및 체지방 관련 위험율을 감소시키는 결과가 나타났다.

• Applied Biological Chemistry
• /
• 제46권2호
• /
• pp.123-129
• /
• 2003

본 연구는 서울 지역에 거주하고 일상식이를 하는 20-30대 여성 47명을 대상으로 1일 4.Og의 누에고치 유래 실크 펩타이드와 녹차잎 및 식이 섬유소를 한 달 정도 섭취하도록 하여 2002년 4월 1일부터 5월 30일에 실시하였으며, 그 결과를 요약하면 다음과 같다. 실험군의 평균 연령은 26.2세, 평균신장은 161.7cm, 평균 체중은 60.7kg, BMI평균은 23.4이었다. 보충전에 비하여 보충 후에 대조군의 총열량, 당질, 지질, 단백질 식이 섬유소 섭취량의 유의적인 차이는 나타나지 않았으나, 실험군의 경우 총열량은 보충 후에 유의적으로 감소하는 경향으로 나타났으며(p<0.01), 체중 변화는 유의적인 차이는 나타나지 않았으나 보충 후에 3.0 kg 정도 감소하는 것으로 나타났으며, BMI는 유의하게 감소하는 경향을 나타내었다(p<0.01). 체지방량 변화는 보충 후 유의적으로 감소하는 경향으로(p<0.001) 보충 전에 비해 2.0 kg 정도 감소하는 것으로 나타났다. 복부비만율(WHR)의 경우 보충군에서 보충 전에 비해 유의적으로 감소하는 것으로 나타나(p<0.01), 복부비만 해소에 효과적으로 작용하는 것으로 나타났다. Total cholesterol과 LDL-cholesterol 변화 또한, 보충 후에 유의적으로 감소하는 것으로 나타났다. 보충후에 따른 상관관계를 분석한 결과로 HDL-cholesterol은 BMI와 WHR에서 음의 상관관계가 나타났다(p<0.01). LDL/HDL ratio BMI와 p<0.01 수준에서 양의 상관관계가 나타났으며, WHR과는 p<0.05수준에서 양의 상관관계가 나타났다. 이상 결과에서 보듯이, 저분자 펩타이드, 녹차잎 및 식이 섬유소의 보충은 체지방의 감소 효과 뿐만 아니라, 혈청 내 total cholesterol과 LDL-cholesterol 수준의 감소 효과가 있음을 알 수 있었다. 특히 신체의 부위 중 복부의 지방을 감소시켜 복부 비만 관리 및 체지방 관련 위험율을 감소시키는 결과가 나타났다.

• Applied Biological Chemistry
• /
• 제20권2호
• /
• pp.188-204
• /
• 1977

인삼(人蔘)의 유효성분(有效成分)으로 알려진 saponin을 Thin layer chromatography로 전개(展開)하여 Digital Densitometer를 사용(使用)하여 한국인삼(韓國人蔘)의 산지별(産地別), 부위별(部位別), 재배연도별(栽培年度別) saponin함량(含量) 및 그 saponin fraction의 조성비(組成比)를 정량(定量)하고, 홍삼(紅蔘) 및 인삼(人蔘)엑기스 제조중(製造中) 일어나는 saponin함량(含量)의 변화(變化)를 연구(硏究)하여 다음과 같은 결과(結果)를 얻었다. 1. 산지별(産地別) saponin 함량(含量)에는 별로 차이(差異)가 없었으며, panaxadiol을 aglycone으로 하는 saponin군(群)과 panaxatriol을 aglycone으로 하는 sapon군(群)의 조성비(組成比)는 ($1.7{\sim}2.6$) : 1정도였다. 2. 부위별(部位別)로 볼 때, saponin함량(含量)은 미삼(尾蔘)이 12.7%로서 3.3%인 백삼(白蔘)의 4배에 가까운 높은 값을보였다. 그리고 saponin fraction별(別)로 볼 때, panaxadiol을 aglycone으로 하는 saponin fraction도 미삼(尾蔘)이 백삼(白蔘)보다 많으나, panaxatriol을 aglycone으로 하는 saponin fraction은 반대(反對)로 미삼(尾蓼)이 백삼(白蔘)보다 적었다. TLC의 2차원전개결과(次元展開結果), ginsenoside-Rd는 백삼(白蔘)에만 나타나고, 미삼(尾蔘)에서는 나타나지 않는 반면(反面), Rf와 $Rg_1$은 미삼(尾蔘)에서는 분리(分離)되었으나, 백삼(白蔘)에서는 $Rg_1$만이 존재하고, Rf는 분리(分離)되지 않았다 3. 재배연도별(栽培年度別) 근부(根部)의 saponin함량(含量)은 재배기간(栽培其間)에 따라 일정(一定)한 경향(傾向)을 찾아볼 수 없으나, 인삼근당평균(人蔘根當平均) saponin함량(含量)은 2년근(年根)이 90.3mg, 3년근(年根)이 254.2mg. 4년근(年根)이 404.2mg, 5년근(年根)이 996.9mg, 6년근(年根)이 1377.1mg으로 재배기간(栽培其間)이 길어질수록 현저(顯著)하게 높았다. 그리고 인삼지상부(人蔘地上部)의 saponin함량(含量)도 재배기간(栽培其間)에 길어질수록 높아지는 경향(傾向)을 볼 수 있었다. 그러나, saponin fraction별(別)볼 때는 $5{\sim}6$년(年)의 수확기(收穫期)에 가까워질수록 panaxatriol을 aglycone으로 하는 saponin fraction의 함량(含量)이 높았다. 4. 홍삼제조중(紅蔘製造中)의 saponin fraction별(別) panaxadiol을 aglycone으로 하는 saponin fraction의 조성비(組成比)도 건삼(乾蔘)에 비(比)하여 홍삼(紅蔘)이 낮아졌으나, panaxatriol을 aglycone으로 하는 saponin fraction의 조성비(組成比)는 건삼(乾蔘)에 비(比)하여 홍삼(紅蔘)이 오히려 높았다. 홍삼(紅蔘)의 Thin layer chromatogram에는 건삼(乾蔘)의 그것에 나타나지 않았던 수개(數個)의 미확인(未確認) spot를 더 볼 수 있었다. 5. Ethanol과 물로 미삼(尾蔘)을 추출(抽出)하여, 29.9%의 인삼(人蔘)엑기스를 얻었는데, 이 엑기스에는 미삼(尾蔘)으로부터 추출수율(抽出收率)이 94.2%에 상당(相當)하는 saponin이 이행(移行) 함유(含有)되어 있었다.

• 한국자원식물학회지
• /
• 제36권2호
• /
• pp.181-190
• /
• 2023

국내 홉 생산은 외국산 수입으로 1990년대 초반 이후 중단된 상태이나, 최근 수제맥주 붐의 영향으로 국내 생산에 대한 관심이 고조되고 있다. 본 연구는 국내 홉 생산 및 육종을 위한 기반연구로 외국산 도입 홉 6개 품종을 대상으로 생육특성 및 증식기술 개발중심으로 수행하였다. 2021년과 2022년 진행한 홉 생육조사에서 재식 후 4년차보다 5년차에서 일반적으로 홉의 착화고, 착화수, 구화의 크기와 무게가 증가하는 경향을 나타냈다. 홉 삽목 실험의 결과, 일반적으로 발근제 '아토닉' 처리를 하지 않은 물꽂이에서도 전체 평균 발근율이 88%로 높았지만 아토닉을 침지하거나 희석하여 관주할 경우 발근율이 93%로 증가하는 경향을 나타냈다. 아토닉 처리 방법에 따른 발근력과 발근율에는 품종간 차이가 있었다. 발근 삽목묘를 상토 이식 후 생존율을 확인 하였을 때, 조직배양실에서 삽목한 것이 온실에서 삽목한 것에 비해 상당히 생존율이 떨어졌다. 따라서 홉 삽목시에는 물꽂이 만으로도 높은 삽목 성공률을 얻을 수 있으며, 상토 이식 후 식물체를 안정적으로 관리하는 기술 개발이 홉 대량증식에서 중요할 것으로 판단된다. 조직배양 기술을 통해 홉을 증식할 땐 IAA 0.1 ㎎/L에 BAP 1 ㎎/L 보다 TDZ 1 ㎎/L를 첨가하여 배양하는 것이 다경유도에 효과적이다. 이러한 삽목 및 조직배양 증식과 순화 기술을 정립하면, 국내 홉 건전묘 생산에 활용이 가능할 것으로 생각된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Asia pacific journal of information systems
• /
• 제21권2호
• /
• pp.89-116
• /
• 2011

In collaborative tagging systems such as Delicious.com and Flickr.com, users assign keywords or tags to their uploaded resources, such as bookmarks and pictures, for their future use or sharing purposes. The collection of resources and tags generated by a user is called a personomy, and the collection of all personomies constitutes the folksonomy. The most significant need of the folksonomy users Is to efficiently find useful resources or experts on specific topics. An excellent ranking algorithm would assign higher ranking to more useful resources or experts. What resources are considered useful In a folksonomic system? Does a standard superior to frequency or freshness exist? The resource recommended by more users with mere expertise should be worthy of attention. This ranking paradigm can be implemented through a graph-based ranking algorithm. Two well-known representatives of such a paradigm are Page Rank by Google and HITS(Hypertext Induced Topic Selection) by Kleinberg. Both Page Rank and HITS assign a higher evaluation score to pages linked to more higher-scored pages. HITS differs from PageRank in that it utilizes two kinds of scores: authority and hub scores. The ranking objects of these pages are limited to Web pages, whereas the ranking objects of a folksonomic system are somewhat heterogeneous(i.e., users, resources, and tags). Therefore, uniform application of the voting notion of PageRank and HITS based on the links to a folksonomy would be unreasonable, In a folksonomic system, each link corresponding to a property can have an opposite direction, depending on whether the property is an active or a passive voice. The current research stems from the Idea that a graph-based ranking algorithm could be applied to the folksonomic system using the concept of mutual Interactions between entitles, rather than the voting notion of PageRank or HITS. The concept of mutual interactions, proposed for ranking the Semantic Web resources, enables the calculation of importance scores of various resources unaffected by link directions. The weights of a property representing the mutual interaction between classes are assigned depending on the relative significance of the property to the resource importance of each class. This class-oriented approach is based on the fact that, in the Semantic Web, there are many heterogeneous classes; thus, applying a different appraisal standard for each class is more reasonable. This is similar to the evaluation method of humans, where different items are assigned specific weights, which are then summed up to determine the weighted average. We can check for missing properties more easily with this approach than with other predicate-oriented approaches. A user of a tagging system usually assigns more than one tags to the same resource, and there can be more than one tags with the same subjectivity and objectivity. In the case that many users assign similar tags to the same resource, grading the users differently depending on the assignment order becomes necessary. This idea comes from the studies in psychology wherein expertise involves the ability to select the most relevant information for achieving a goal. An expert should be someone who not only has a large collection of documents annotated with a particular tag, but also tends to add documents of high quality to his/her collections. Such documents are identified by the number, as well as the expertise, of users who have the same documents in their collections. In other words, there is a relationship of mutual reinforcement between the expertise of a user and the quality of a document. In addition, there is a need to rank entities related more closely to a certain entity. Considering the property of social media that ensures the popularity of a topic is temporary, recent data should have more weight than old data. We propose a comprehensive folksonomy ranking framework in which all these considerations are dealt with and that can be easily customized to each folksonomy site for ranking purposes. To examine the validity of our ranking algorithm and show the mechanism of adjusting property, time, and expertise weights, we first use a dataset designed for analyzing the effect of each ranking factor independently. We then show the ranking results of a real folksonomy site, with the ranking factors combined. Because the ground truth of a given dataset is not known when it comes to ranking, we inject simulated data whose ranking results can be predicted into the real dataset and compare the ranking results of our algorithm with that of a previous HITS-based algorithm. Our semantic ranking algorithm based on the concept of mutual interaction seems to be preferable to the HITS-based algorithm as a flexible folksonomy ranking framework. Some concrete points of difference are as follows. First, with the time concept applied to the property weights, our algorithm shows superior performance in lowering the scores of older data and raising the scores of newer data. Second, applying the time concept to the expertise weights, as well as to the property weights, our algorithm controls the conflicting influence of expertise weights and enhances overall consistency of time-valued ranking. The expertise weights of the previous study can act as an obstacle to the time-valued ranking because the number of followers increases as time goes on. Third, many new properties and classes can be included in our framework. The previous HITS-based algorithm, based on the voting notion, loses ground in the situation where the domain consists of more than two classes, or where other important properties, such as "sent through twitter" or "registered as a friend," are added to the domain. Forth, there is a big difference in the calculation time and memory use between the two kinds of algorithms. While the matrix multiplication of two matrices, has to be executed twice for the previous HITS-based algorithm, this is unnecessary with our algorithm. In our ranking framework, various folksonomy ranking policies can be expressed with the ranking factors combined and our approach can work, even if the folksonomy site is not implemented with Semantic Web languages. Above all, the time weight proposed in this paper will be applicable to various domains, including social media, where time value is considered important.

• Applied Biological Chemistry
• /
• 제18권3호
• /
• pp.145-166
• /
• 1975

닭에 대(對)한 칼슘공급원(供給源)의 효율(效率)을 측정(測定)하기 위(爲)하여 병아리시험(試驗)에서는 탄산(炭酸)칼슘, 인산(燐酸)2칼슘-2수화물(水化物) 및 인산(燐酸)2칼슘-무수물(無水物)을 이용(利用)하였고 산란계시험(産卵鷄試驗)에서는 탄산(炭酸)칼슘 및 패각(貝殼)을 사용(使用)하여 균형시험(均衡試驗)을 실시(實施)하였으며 내생(內生)칼슘측정(測定)을 위(爲)하여 동위원소희석법(同位元素稀釋法)을 적용(適用)하였다. 1. 병아리에 대(對)한 시험결과(試驗結果)가. 각구(各區)의 사료섭취량(飼料攝取量)사이에는 통계적(統計的)인 유의차(有意差)가 나타나지 않았으나 체중증가량(體重增加量)에 있어서는 인산(燐酸)2칼슘-2수화물(水化物)이 가장 우수(優秀)하였고 다음 인산(燐酸)2칼슘-무수물(無水物), 탄산(炭酸)칼슘의 순(順)으로 떨어졌다. 사료이용효율(飼料利用效率)에 있어서는 인산(燐酸)2칼슘-2수화물구(水化物區)가 탄산(炭酸)칼슘구(區)나 인산(燐酸)2칼슘-무수물구(無水物區)보다 좋게 나타났다. 나. 경골중(經骨中) 회분함량(灰分含量)에 있어서는 각구간(各區間) 비슷한 수치(數値)를 보였다. 다. 인산(燐酸)2칼슘-2수화물(水化物)을 급여(給與)한 구(區)의 경골회분중(脛骨灰分中)의 칼슘농도(濃度)는 다른 2개구(個區)에 비(比)하여 높았다. 라. 제단백혈장중(除蛋白血漿中)의 칼슘농도(濃度)에 있어서는 각처리간(各處理間)에 유의차(有意差)가 나타나지 않았다. 마. 인산(燐酸)2칼슘-2수화물(水化物)을 접취(攝取)한 병아리구(區)의 칼슘의 apparent retention은 65.9%로서 탄산(炭酸) 칼슘구(區)의 64.0%보다 조금 높았으며 인산(燐酸)2칼슘-무수물구(無水物區)의 59.9%보다 상당(相當)히 높은 수치(數値)이었다 바. 경골회분중(脛骨灰分中) 및 제단백혈장중(除蛋白血漿中) 칼슘대인(對燐)의 비율(比率)은 각구간(各區間) 비슷한 결과(結果)를 보였다. 사. 전배설(全排泄)칼슘이 내생배설(內生排泄)칼슘이 점(占)하는 비율(比率)은 인산(燐酸)2칼슘-2수화물(水化物)을 급여(給與)한 구(區)에서 35.6%이었으며 탄산(炭酸)칼슘구(區)나 인산(燐酸)2칼슘-무수(無水) 물구(物區)보다 높게 나타났다(31.0 혹(或)은 31.4%). 아. 병아리의 내생(內生)칼슘은 인산(燐酸)2칼슘-2수화물구(水化物區)에서 일당(日當) 17.2mg, 인산(燐酸)2칼슘-무수물구(無水物區)에서 16.1mg, 탄산(炭酸)칼슘구(區)에서 14.6mg이었다. 자. True retained calcium에 있어서는 인산(燐酸)2칼슘-2수화물구(水化物區)에서 일당(日當) 109.9mg이 나타났으므로 탄산(炭酸)칼슘구(區)의 98.7mg이나 인산(燐酸)2칼슘-무수구(無水區)의 92.7mg 보다 훨씬 높았다(P<0.01). 차. 칼숨의 true retention에 있어서는 인산(燐酸)2칼슘-2수화물구(水化物區), 탄산(炭酸)칼슘구(區) 및 인산(燐酸)2칼슘-무수물구(無水物區)에서 각각(各各) 78.1,75.1 몇 72.6%이었다. 2. 산란계(産卵鷄)에 대(對)한 시험결과(試驗結果) 가. 탄산(炭酸)칼슘 혹(或)은 패각(貝殼)을 급여(給與)한 살란계(産卵鷄)의 사료섭취량(館料攝取量), 산란율(産卵率) 및 사료요구율(飼料要求率)은 각각(各各) 비슷하게 나타났다. 나. 탄산(炭酸)칼슘을 섭취(攝取)한 산란계(産卵鷄)의 저단백혈장중(除蛋白血漿中) 칼슘농도(濃度)는 패각(貝穀)을 급여(給與)한 구(區)와 비등(比等)한 수치(數値)를 보였다. 다. 탄산(炭酸)칼슘구(區)의 칼슘의 apparent retention은 62%로서 패각구(貝殼區)의 52%보다 높게 나타났다(P<0.05). 라. 전배설(全排泄)칼슘中 내생배설(內生排泄)칼슘이 점(占)하는 비율(比率)은 탄산(炭酸)칼슘구(區)가 23.5%로서 패각구(貝穀區)의 15.6%보다 높았다. 마. 탄산(炭酸)칼슘급여구(給與區)의 내생배설(內生排泄)칼슘량(量)은 일살(日當) 310mg으로 패각구(貝殼區)의 261mg보다 약간 높았다 바. 탄산(炭酸)칼슘구(區)의 true retention은 70.7%이었으며 이는 패각급여구(貝殼給與區)의 59.2% 보다 높게 나왔다 (P<0.05).