• 펄프종이기술
• /
• 제42권3호
• /
• pp.28-36
• /
• 2010

Today We have three full series of the annals of Joseon Dynasty. Taebaeksan volume which is one of them shows comparatively good maintenance but Taebaeksan volume also decomposed in patches. The size of cover and inner paper were increased in late Joseon Dynasty, but the weight, thickness and basis weight bears no relation to each other. The oxidation index of paper in annals of pre-periods of King Sunjo shows very high value. After the annals of King Sunjo, the oxidation index of paper is very similar to today's Hanji. L.a.b values of inner paper in the Taebaeksan volume are similar generally. The average length of fiber using image analysis soft ware is 8.08~9.92 mm, that like immediate value of measurement. The air fraction of fiber's range is 1.20~2.12%. It lower than today's Hanji. After considering the factors of the length of fiber, air fraction and FE-SEM, we reached that no difference between raw material of inner paper in the Taebaeksan volume.

• Structural Engineering and Mechanics
• /
• 제62권6호
• /
• pp.771-780
• /
• 2017

In this study, free vibration and damping behaviors of multilayered symmetric sandwich beams and single layered beams made of Functionally Graded Materials were investigated, experimentally and numerically. The beams were composed of Aluminum and Silicon Carbide powders and they were produced by powder metallurgy. Three beam models were used in the experiments. The first model was isotropic, homogeneous beams produced by using different mixing ratios. In the second model, the pure metal layers were taken in the middle of the beam and the weight fraction of the ceramic powder of each layer was increased towards to the surfaces of the beam in the thickness direction. In the third model, the pure metal layers were taken in the surfaces of the beam and the weight fraction of the ceramic powder of each layer was increased towards to middle of the beam. Then the vibration tests were performed. Consequently, the effects of stacking sequence and mixing ratio on the natural frequencies and damping responses of functionally graded beams were discussed from the results obtained. Furthermore, the results obtained from the tests were supported with a finite-element-based commercial program, and it was found to be in harmony.

• Applied Biological Chemistry
• /
• 제20권3호
• /
• pp.285-291
• /
• 1977

(가) 2개 이상(以上) t개의 시료(試料)를 3점기호척도시험법(點嗜好尺度試驗法)에 의해 실험한 결과를 통계처리(統計處理)하여 t개 시료 상호간(相互間)의 품질차(品質差)를 비교(比較)하는 해석법(解析法)에 대해서 검토(檢討) 하였다. (나) 그 결과 $Scheff{\acute{e}}'s$ method의 제1신법(第1新法)이 품질차(品質差)의 검출력(檢出力)에서나 얻어지는 정보량(情報量)에서 우수(優秀)함을 확인하고 t개의 시료에 대할 3점기호척도시험법(點嗜好尺度試驗法)의 해석방법(解析方法)으로써 실용성(實用性)이 있다는 결론을 얻었다. (다) 이때 correct oddity chosen에 대한 incorrec toddity chosen의 weight fraction은 chance probability에 의해 계산하여 1/2로 하였다.

• 한국수산과학회지
• /
• 제20권1호
• /
• pp.52-56
• /
• 1987

The antioxidative activity of each molecular weight (MW) fraction of Maillard reaction products prepared from a D-glucose and glycine system, i. e., MW below 1000, MW between 1000 to 3000 and MW above 5000, nondialyzable melanoidins, reduced melanoidins and ozone-treated melanoidins were estimated in a linoleic acid-aqueous system. The antioxidative activity ana reducing ability of Maillard reaction products increased with increasing molecular weight and color intensity. Maillard reaction products of MW above 1000 showed obvious antioxidative activity and reducing ability, whereas the MW fraction below 1000 showed only weak activities. When nondialyzable melanoidins were reduced with sodium borohydride, their color intensity and reducing ability remarkably decreased, but their antioxidative activity did not decrease so much.

• Advances in nano research
• /
• 제2권2호
• /
• pp.99-109
• /
• 2014

Experiments are performed to investigate the single-phase flow heat transfer augmentation of MWCNT/HT-B Oil in both smooth and micro-fin helical tubes with constant wall temperature. The tests in laminar regime were carried out in helical tubes with three curvature ratios of 2R/d=22.1, 26.3 and 30.4. Flow Reynolds number varied from 170 to 1800 resulting in laminar flow regime. The effect of some parameters such as the nanoparticles concentration, the dimensionless curvature radius (2R/d) and the Reynolds number on heat transfer was investigated for the laminar flow regime. The weight fraction of nanoparticles in base fluid was less than 0.4%. Within the applied range of Reynolds number, results indicated that for smooth helical tube the addition of nanoparticles to the base fluid enhanced heat transfer remarkably. However, compared to the smooth helical tube, the average heat transfer augmentation ratio for finned tube was small and about 17%. Also, by increasing the weight fraction of nanoparticles in micro-fin helical tubes, no substantial changes were observed in the rate of heat transfer enhancement.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권1호
• /
• pp.53-58
• /
• 2015

Background: The purpose of this study was to assess the the efficacy of oral glutamine (GLN) in prevention of acute radiation-induced esophagitis in patients with lung cancer and determine the predictive role of clinical and dosimetric parameters. Materials and Methods: Thirty-two patients diagnosed with lung cancer were studied prospectively. Sixteen patients (50%) received prophylactic powdered GLN orally in doses of 10g/8h. Patients were treated 2 Gy per fraction daily, 5 days a week. We evaluated the grading of esophagitis daily at the end of each fraction of each treatment day until a cumulative dose of 50 Gy was reached. The primary end point was radiation-induced esophagitis. Results: All patients tolerated GLN well. Toxicity grade, weight loss, serum cytokine levels and esophageal transit times exhibited statistically significant improvement in the GLN receiving group. GLN suppressed the inflammation related to the disease and treatment and reduced toxicity with statistical significance. Conclusions: This study suggests a benefical role of oral GLN use in prevention and/or delay of radiation-induced esophagitis, in terms of esophageal transit time and serum immunological parameters, as well as weight loss.

• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.29-39
• /
• 1995

The phase separated structure and the electro-optical properties of the (polymer/liquid) crystal : LC) composite film strongly depended on the weight fraction of LC in it. The continuous LC phase was formed in a three-dimensional polymer network when the LC weight fraction was above 40wt%. The aggregation structure of the composite film could be controlled by controlling the solvent evaporation velocity during the film preparation process. The smaller LC domains or channels were formed in the case of the faster solvent evaporation velocity. The composite film exhibited reversible light scattering-light transmission switching upon electric field -OFF and -ON states, respectiverly. The light scattering properties of the composite film strongly depended on the spatial distortion of the nematic directors as well as the mismatch in refractive indices between matrix polymer and LC.

• 폴리머
• /
• 제31권5호
• /
• pp.385-392
• /
• 2007

Poly (N-vinylpyrrolidone) (PVP) groups were grafted onto a poly(3-hydroxybutyrate-co-3-hydroryvalerate) (PHBV) backbone in order to modify its properties and synthesize a novel biocompatible copolymer. The crystallization behavior of PHBV and grafted PHBV was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). During the cooling-induced crystallization process, the crystallization temperature and the crystallization rate of the grafted PHBV decreased with increasing PVP weight fraction. On the heating scans of all grafted PHBV samples, a new crystallization exothermic peak appeared at almost the same temperature, suggesting the operation of a recrystallization process, while the melting temperature ($T_m$) and the apparent enthalpy of fusion (${\Delta}H_f$) were not affected by graft modification. During the isothermal crystallization process at the same temperature, the presence of side PVP groups decreased the spherulitic growth rate and the spherulitic band spacing with increasing PVP weight fraction in samples.

• Nuclear Engineering and Technology
• /
• 제32권1호
• /
• pp.10-16
• /
• 2000

Preliminary experiment was peformed to investigate the leaching characteristics of paraffin waste forms that had been recently generated in large quantities at domestic nuclear power plants. At first, waste simulants whose compositions were different in mixing ratio of paraffin to boric acid were prepared. Their compressive strengths were measured and ninety-day leaching test of specimen including cobalt was carried out according to ANSI/ANS-16.1 test procedure. Water immersion test was also conducted keeping pace with leaching test and the weight change and the compressive strength of specimen were observed after ninety days. The compressive strength of waste form exhibited 666 psi (4.53 MPa) in the case where mixing ratio of boric acid to paraffin was 78/22, which was adopted in concentrate waste drying system of domestic nuclear power plants. The leaching test resulted in about 50% of the cumulative fraction leached for boric acid and cobalt, respectively. The specific gravity of waste form was 0.87 ［g/g］whose value was less than that of water because the weight loss of about 39% occurred after the water immersion test of ninety days. It was also observed that the waste form which had undergone ninety-day water immersion test exhibited the compressive strength of 203 psi (1.38 MPa).

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.69-77
• /
• 2013

The purpose of this study is to improve the properties of epoxy resin using the big-sized titanium oxide nanoparticles. The effects of particle weight fraction and shape of sample on the thermal and mechanical properties in titanium oxide reinforced epoxy resin has been investigated. In addition, the effect of particle dispersion situation on the mechanical properties of nanocomposites has been studied. As a result, the Tg was almost same regardless of the content of nanoparticles. Storage modulus increased up to the content of 3wt% particles and then decreased. Tensile strength and modulus of film-shaped sample with 1wt% was higher than the one of pure epoxy, while other composites were not. The tensile strength of dogbone-shaped sample with 1wt% was only higher than the one of pure epoxy, while other composites were lower than the one of pure epoxy. Tensile modulus of dogbone-shaped samples increased with the content of particles.