• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.49-54
• /
• 1997

It is very important to measure and monitor hull stress which is caused by a buoyant force and a weight of cargo for safety of ship. However, an exact measurement of hul stress, using the traditional strain gage which is made of metal or semiconductor, is very difficult, because a ship would be exposed by the severe temperature environment of $-20 ^{\circ}C$ to $80 ^{\circ}C$. This paper propose a new concept strain gage which can improve accuracy and compensage effectively affects due to temperature. The strain gage is consists of two parts. One is the Hull Deformation Amplifier which introuce several lever and link system, and another is a transducer converting distance into voltage signal. The HDA measure the amount of deformation and amplify it. And a lever and link system of the HDA is introduced for compensating temperature deformation by installing in perpendicular direction without stress. This paper also reports on the results of the experiments to verify linearity of the strain gage.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.10-15
• /
• 2008

The proper docking block arrangement, loading condition and structural reinforcement are required to ensure structural safety of ship, when she is in re-docking and launching for inspection or repair. The large reaction force due to narrow bottom tangent area, heavy weight and ballast loading are occurred at aft body and fore body of ship. Especially, in case of LNGC, the strength evaluation is necessary for cargo hold areas including mid-body because tank hydro test is performed in dry-dock. The analysis results and experiences to confirm structural safety for docking of conventional LNGC$(138K{\sim}151.7K)$ are introduced in this paper.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.135-142
• /
• 2006

The package loading process of tile lumbering industry is an operation that after a pair of workers binds three or six lumber into a unit and cut the both ends of the lumber, carry and pack and load the weight cargo of 30-50kg. The package loading process causes lots of noise and wood dust when the lumber are cut and brings about the main cause of the musculoskeletal disorder when workers carry the heavy goods. Therefore, we developed the monolithic package loading equipment cutting both ends that is enable to improve the working method and environments of the existing package loading process. The noise and wood dust were reduced by developing the device and the main cause of shirking duties on working place was solved by preventing the musculoskeletal disorder and improving the working environments as excluding the work of carrying heavy goods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.433-440
• /
• 2007

In this paper a new dynamoelectric winch system is introduced which is widely applied in shipping. building, architecture and so on. Generally in the winch system the squirrel cage induction motor is used as prime mover and line voltage is directly applied to the induction motor during operation. So it is difficult to obtain the smoothing revolution. because of variation of the weight of cargo and system operating method. Based on above reasons, the switched reluctance motor (SRM) is proposed to replace the induction motor because of more reliable mechanical structure, better traction characteristic and higher efficiency compared to induction motor. And in order to solve smoothing revolution problem, instantaneous torque control method based on torque sharing function (TSF) is used. Finally the validity of the proposed method is verified through the simulation and experimental results.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.9 no.2
• /
• pp.111-117
• /
• 1980

The optimum methods of transport of fresh mackerel caught at korean coast and neighboring sea were investigated. The quality of mackerel after 3 day-stored with ice showed that the freshness were still kept. The temperature fluctuation of mackerel during transport with ice from Busan to Seoul indicated below $5^{\circ}C$, recommended by I.I.R. Heat loss of iced mackerel in transit was calculated and converted into ice weight in case of cargo truck and insulated truck. It was assumed that the semi-dressed mackerels were more effective and economic than the round ones during transport.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.3
• /
• pp.267-280
• /
• 2015

The European civil aviation industry, which had lower technical skills, capital strength and market scale than the U.S., adopted the production system of joint development and division labor between the nations of Europe. Each plant locations strengthened their specialization of the production branch in the past 40 years with a geographical accumulation of the specialized manufacturing facilities, suppliers, universities and laboratories by the logic of geographical proximity and learning effect. The cargo plane transportation system in the production of short- and medium-haul aircraft facilitated the geographical dispersion of manufacturing process and the logistical linkage among the various plant locations. But the production of long-haul large aircraft(A380) chosen the transportation system by the cargo ship because of the size and weight. Considering the transportation system by the cargo ship, the choice of Toulouse as a final assembly plant location was the irrational locational decision from a locational point of view. This locational choice is explained by the merging process of the European civil aviation industry, the logic of learning effect and geographical proximity, and the active attraction support policy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.527-534
• /
• 2016

The non-rail mobile rack, which is used for cargo storage, can improve the storage capacities of logistics centers. Furthermore, it has the advantage that it can be used in traditional logistics centers without making any changes or renovation, such as installing rails. However, when the rack is operated by separated drive actuators mounted on the left and the right wheels, precise position control of the wheels is necessary even if the unbalanced cargo weight on the rack would affect the control. Therefore, internal synchronization control for position tracking between the left and right wheels on the non-rail mobile rack is necessary in this study. In addition, external synchronization control for realizing the same straight movements between mobile racks is necessary. For the internal and the external synchronization control, we propose a synchronization control algorithm based on the repetitive control theory. An internal synchronization control algorithm with repetitive control theory requires the application of the robust servo control method owing to parameter variations. In this case, we can set up the gains for the robust servo control system by considering the cargo variations on the mobile rack. Furthermore, for developing the external synchronization control algorithm, we use a double repetitive control system to perform synchronization control between mobile racks. The efficiency of the proposed control algorithm will be verified by simulation and experimental results. The proposed algorithm can be easily applied in the industry.

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.91-107
• /
• 2011

This paper is concerned about applying the Fuzzy-AHP(Analytic Hierarchy Process) for an analysis of logistics network between Gwangyang port and China ports. In this study, measurement areas were selected for hardware aspect, software aspect, and marketing aspect. As for the analysis regarding measurement area, the results were shown as follows: a marketing aspect(38.7%) as the first rank: a hardware aspect(35.3%) as the second rank: a software aspect(26.0%) as the third rank. The analysis result of hardware aspect reveals that the most important element is regular route addition between Gwangyang port and China ports(45.2%). The most important element of software and marketing aspect were a government support(46.4%) and a high value transshipment cargo inducement(36.4%). As for the whole priority which conversion weight was applied, the results were shown as follows: a regular route addition between Gwangyang port and China ports(15.9%) as the first rank: a high value transshipment cargo inducement(14.1%) as the second rank: a attracting import cargo from China(12.9%) as the third rank. The result of this study suggests some guidelines for deciding priority of logistics network between Gwangyang port and China ports.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.311-316
• /
• 2004

LMTT (Linear Motor-based Transfer Technology) is a horizontal transfer system for the yard automation. which has been proposed to take the place qf AGV (Automated Guided Vehicle) in the maritime container terminal. the system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle mr. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research structural optimization for a mover of shuttle mr is performed to minimize the weight satisfying design criteria the objective function is set up as weight. On the contrary, design variable is considered as transverse, longitudinal and wheel beam's thickness and shape variable determining the dimension toward high direction and the constraints are the stresses.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.2
• /
• pp.180-187
• /
• 2018

Corrugated bulkhead has been adopted for cargo tank bulkheads of commercial vessels such as bulk carriers, product oil carriers and chemical tankers. It is considered that corrugated bulkhead is a preferred structural solution, compared to the flat stiffened bulkhead, due to several advantages such as lower mass, easier maintenance and smaller corrosion problems. Many researches to find the optimum shape of corrugated bulkhead have been mostly carried out for bulk carriers. Compared to corrugated bulkheads of bulk carriers, ones of chemical tankers are more complicated since they are composed of transverse and longitudinal bulkheads, and they are made of higher priced materials. The purpose of this study is the development of minimum weight design method for corrugated bulkhead of chemical tankers. Evolution strategy is applied as an optimization technique. It has been verified from many researches that evolution strategy searches global optimum point prominently by using multi-individual searching technique. Multi-individual searching methods need excessive time if they connect to 3-D finite element model for repetitive structural analyses. In order to resolve this issue, 2-D beam element connected to deck and lower stool is substituted for a corrugated structure in this study. To verify the reliability of the structural responses by idealized 2-D beam model, they have been compared with ones by 3-D finite element model. In this study, optimum design for corrugated bulkhead of 30 K chemical tanker has been carried out, and the results by developed optimum design program have been compared with design data of existing ship. It is found out that optimum design is about 9% lighter than one of existing ship.