• 제목/요약/키워드: Weight Cargo

검색결과 112건 처리시간 0.025초

인천항의 수출 적컨테이너화물 물동량 추정에 관한 연구 (Forecasting Export Loaded Container Throughput of Incheon Port)

  • 고용기;김은지;신정용;김태호
    • 한국항만경제학회지
    • /
    • 제24권3호
    • /
    • pp.57-77
    • /
    • 2008
  • 본 연구에서는 기존의 물동량 전망에 적용한 방법론이 아닌 개별 항만별 예측방법을 적용하여 인천항에서 경유하는 수출 화물 물동량을 전망하였다. 물동량 전망에 있어 기존의 통계적, 계량경제학적인 분석 대신 시스템 분석을 적용하였다. 대부분의 기존연구에서 적용하였던 총량적 접근방법은 전국의 총 화물물동량을 각 품목별 특성에 따른 계량모형을 통해 추정한다. 이는 전국권역을 기반으로 항만 O/D에 따라 향후 권역별 항만 개발계획 및 개별입지변화를 반영하여 체계적인 방법으로 배분함으로써 전국 항만의 물동량을 도출했다. 본 연구에서는 이러한 기존방법론이 아닌 개별항만의 주변상창이나 직접적인 영향을 미치는 산업단지의 현황을 토대로 물동량을 도출해 내는 방법이다. 본 연구에 있어 기초자료는 인천항을 배후권역으로 하는 수출 화물의 기종점인 배후산업단지의 소요면적에 대한 자료를 토대로 조사하였다. 이는 수출의 대부분을 창출하는 산업단지의 소요면적을 파악하여 이에 원단위를 적용함으로써 산단별 입출되는 물량을 도출할 수 있다. 여기에 산단별 분양률, 업종비중, 가동률, 그리고 산단별 수출 비중을 적용하여 인천항의 수출 화물 물동량을 전망하였다. 본 연구는 기존의 전망치와 비교를 함으로써 연구방법론의 다양화와 비교연구를 수행하는 연구성과를 거두었다.

  • PDF

선박 평형수 처리장치 선정을 위한 경제성 분석 (Economy Analysis to Retrofit Ballast Water Treatment System for an Existing Vessel)

  • 지재훈;박상균;오철
    • 수산해양교육연구
    • /
    • 제28권5호
    • /
    • pp.1319-1328
    • /
    • 2016
  • Since Ballast Water Management Convention has been effected, BWTS, applied to new-building vessels and existing vessels, have been developed from many countries with various treatment methods. However, BWTS is mainly typed Electrolysis, Ozone and UV type. Approximately 70 products have been type approved by the Flag Administrations. For the new-building vessels, the vessels' design and construction have been considered for arrangements and installations for BWTS. However, existing vessels which already construction had finished have problem with selection of BWTS type for installation and arrangement. The selection of the most economized BWTS system is important though, CAPEX has not been made any significant differences. However, OPEX is more important factor. Consequently, detail analysis of OPEX is the key to the selection of the most economized BWTS system and also it can be the purpose of this study. The feasibility study on the main three type of BWTS (Electrolysis, Ozone and UV type) for 175K Bulk Carrier and 57K Cargo ship has been conducted for this study. Because, these three type of BWTS have been the most frequently installed and used and the two type of object vessels are consist of the 40% of the world merchant ship market. For this study, interest rate, project duration (operation time after installation), maintenance cost and fuel oil price are considered as major factor of feasibility study. In addition, expecting Interest rates to sensitivity analysis conducted for more accurate feasibility study. For 175K Bulk carrier, ozone treatment system is more economical than other types. For 57K cargo ship, UV type is considered more economical than other types. However, it is concluded that electrolysis type is more suitable compare to installation space, total weight and electrical power consumption.

멤브레인형 LNG선 화물창 단열시스템의 수면낙하 내충격 응답해석 -II : 내충격 응답거동에 미치는 영향 고찰- (Wet Drop Impact Response Analysis of CCS in Membrane Type LNG Carriers -II : Consideration of Effects on Impact Response Behaviors-)

  • 이상갑;황정오;김화수
    • 대한조선학회논문집
    • /
    • 제45권6호
    • /
    • pp.735-749
    • /
    • 2008
  • For the development of the original technique of structural safety assessment of Cargo Containment System(CCS) in membrane type LNG carriers, it is necessary to understand the characteristics of dynamic response behavior of CCS structure under sloshing impact pressure. In the previous study, the wet drop impact response analyses of CCS structure in membrane Mark III type LNG carriers were carried out by using Fluid-Structure Interaction(FSI) analysis technique of LS-DYNA code, and were also validated through a series of wet drop experiments for the enhancement of more accurate shock response analysis technique. In this study, the characteristics of structural shock response behaviors of CCS structure were sufficiently figured out by careful examinations of the effects of specimen weight, drop height, incident angle, corrugation and stiffness of inner hull on its shock response behaviors. The shock response analysis of upward shooting fluid to inner hull was performed, and the reason of faster strain response than shock pressure one was also figured out.

Plywood의 기계적 특성 및 파손 거동 분석에 관한 실험적 연구 (An Experimental Study on Mechanical Properties and Failure Behavior of Plywood)

  • 차승주;김정대;김정현;오훈규;김용태;박성보;이제명
    • 대한조선학회논문집
    • /
    • 제56권4호
    • /
    • pp.335-342
    • /
    • 2019
  • The objective of this study is to analyze the mechanical properties of plywood used as a thermal insulating material for LNG CCS (Liquefied Natural Gas, Cargo Containment System). It is created by bonding an odd number of parallel and perpendicular direction for preventing contraction and expansion of wood. Also plywood is widely used as LNG CCS insulating material because of its durability, light weight and high stiffness. Since LNG CCS is loaded with liquid cargo, the impact load by sloshing during operation and the wide temperature range (room temperature, low temperature, cryogenic temperature) exposed during loading, unloading should be considered. The thickness of the plywood which is used for the membrane type MARKIII was selected as the thickness of the test specimen. In this present study, plywood is analyzed by the fracture behavior and mechanical properties of plywood by temperature and grain direction. In addition, it is necessary to analyze the fracture shape and predict the fracture strain by using regression model because the critical load may cause cracks inside the tank, which may affect the leakage of cryogenic liquid.

트럭 Deck Floor Board의 강도향상을 위한 목분복합재의 기계적특성 분석 (Analysis of Mechanical Properties of Wood Flours Composites to Improve the Strength of Truck Deck Floor Boards)

  • 윤성우;고선호;김홍건;곽이구
    • 한국기계가공학회지
    • /
    • 제18권1호
    • /
    • pp.24-30
    • /
    • 2019
  • The deck floor of a the cargo truck becomesis damaged and aged due to the continuous loading of the loading cargo and external environmental factors. Floor boards made of wood and metal are often used. In the case of wood, the cost is high due to the use of imported wood, and the strength is easily deterioratesd due to environmental factors. In the case of metal materials, the durability is higher than that of wood, but problems are raised due to the effect of major factors that hinder the weight reduction, and the effects of corrosion. In order to replace this stucturestructural design, this study proposed a wood fiber composite using natural raw materials. Woody composites are being used as environmentally and friendly exterior materials with the combined advantages of plastic, and wood,; low cost and low density. However, due to the nature of the woody composites, the properties are differentdiffer depending on the contents of the matrix, reinforcing agent, additives, compatibilizer, etc. In this study, we investigate these problems through analysis of the microstructure and mechanical properties according to proper content and injection molding conditions. As a result, it is considered that the wood deck composite can replaced the current Deck Floor Boardreplace current deck floor boards through continuous continued research and results of this study.

화학제품 운반선 수평 파형격벽의 최소중량설계에 관한 연구 (A Study on Minimum Weight Design of Horizontal Corrugated Bulkheads for Chemical Tankers)

  • 신상훈;고대은
    • 한국산학기술학회논문지
    • /
    • 제17권9호
    • /
    • pp.51-56
    • /
    • 2016
  • 파형격벽은 보강격벽에 비해 많은 장점을 갖고 있어 살물선, 정유운반선, 화학제품 운반선의 화물창 격벽으로 사용되고 있다. 살물선 파형격벽의 최적 파형을 구하기 위한 연구는 비교적 활발하게 수행되어 왔으나, 고가의 재질로 구성되어 최적설계 시 경제적 효과가 가장 클 것으로 예상되는 화학제품 운반선에 대한 연구는 거의 찾아보기 어렵다. 화학제품 운반선의 파형격벽은 크게 수직 파형격벽과 수평 파형격벽으로 구분할 수 있으며, 수평 파형격벽은 다른 선종에서는 볼 수 없는 특별한 형태의 격벽으로 30K급 실적선의 경우 전체 파형격벽의 30% 정도를 차지하고 있다. 본 연구의 목적은 화학제품 운반선의 수평 파형격벽에 대한 최소중량설계 방법을 개발하는 것으로, 최적화 기법으로는 진화전략 기법을 도입하여 전체 최소점을 신뢰성 있게 탐색하였고 최적의 결과를 주는 설계변수 값이더라도 현장의 작업성을 위반하면 도태되도록 하여 현장 적용성을 높였다. 또한, 유한요소법에 의한 구조해석을 통해 도출된 최적설계 결과에 대한 구조 안전성을 검증하였다. 최적화 결과에 따른 수평 파형격벽의 설계는 실적선과 비교하여 동등 수준의 구조강도를 확보하면서도 약 14%의 중량 절감 효과를 보였으며, 이에 따라 설계 및 제작 공수를 줄이는데도 크게 기여할 것으로 기대된다.

에어밸런서 공압 회로의 설계 및 성능 실험 (Pneumatic circuit design and Performance test of Air balancer)

  • 김동수;배상규
    • 유공압시스템학회논문집
    • /
    • 제3권3호
    • /
    • pp.20-24
    • /
    • 2006
  • Air balancer is a conveyance cargo-handling machine, used in assembly and process lines of car and machining industries. This can lift up an object, the weight of which is from 5 to 200 kg, and moves it to a position. As industrial technologies evolve, it is required to move an object and fit it into a specified position with greater accuracy, rather than performing simple tasks such as lifting objects up and down as conventional ones do. There is also a demand to handle an object with one hand, rather than with two hands,. Through designs of manifold unit for an air balancer function, pilot regulator unit to keep pressure constant, hand unit for an accurate load perception function, and air balancer circuit, this study enables everybody to work it with ease and convenience. Experiments and comparisons were conducted for the performance evaluation of the circuit.

  • PDF

차세대 철도화물차량의 성능향상방안에 관한 연구 (A Study on the Performance Elevation Methods of Next Generation Railway Freight Vehicles)

  • 함영삼;홍재성;오택열
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.351-354
    • /
    • 2005
  • Research purpose of this project is intending Maintenance Free of freight car and speed up of freight train. At goods transport as heightening traveling by ship speed of freight train shortening raise railway share of physical distribution and stand on tiptoe to Northeast Asia physical distribution main country to contribute expect. This paper is the performance elevation methods of next generation railway freight vehicles.

  • PDF

컨테이너 적재 시스템의 구조 모델링 및 특성 해석 (Structural Modeling and Characteristic Analysis of Container Handling System)

  • 김영상;맹희영
    • 한국생산제조학회지
    • /
    • 제20권4호
    • /
    • pp.458-463
    • /
    • 2011
  • A CHS(Container Handling System) is a system to load and to unload ISO 2000 or ISO 4000 standard containers which is widely used for various industrial transport purpose. A new light type of CHS is introduced in this paper, in order to reduce weight of cargos and to give the convenience in cargo loading and unloading without additional lifting equipments. The structural models of this system are created to assemble the smooth integration of system and to interface the each composing units with the specification of truck chassis to be mounted. These models are applied to find the suitable design parameters under the condition of force restrictions of each units. Finally, the stability of this system are investigated by analyzing the dynamic simulation using Visual NASTRAN 4D, and it could be recommend the good design parameters for the manufacturing purpose.

온-섀시 방식의 고속 컨테이너 하역시스템 개발 (Development of The High-Speed Container Handling System with On-Chassis Type)

  • 최국진
    • 한국산업융합학회 논문집
    • /
    • 제23권2_2호
    • /
    • pp.323-332
    • /
    • 2020
  • Container ships are getting bigger due to the increase in global cargo volume. Therefore, it needs to increase the speed for loading and unloading of containers at the quayside. Traditionally, only one container is handled at once at the quayside due to it's heavy weight. In this paper, a method of handling multiple containers at once using chassis is proposed. Proposed system is consists of a container chassis that can hold three layer stacked containers, transport system that can handle the container chassis including rail-based or vehicle-based roll-on roll-off systems, and dedicated crane system. The conceptual design of crane and transport system that can handle three stacked containers is carried out and verified. The proposed system can be adopted for real quayside container handling system with high speed.