• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.1
• /
• pp.99-109
• /
• 2008

The purpose of this study was to survey sizing system and preferable ease and to decide the body measuring items for pattern making in a men's dress shirt for mass customization industry that is rising to the surface as a new production system. For this, it had a survey subjects were 254 males between 25 to 44 years old who wear dress shirt frequently and the relevant on line companies, and analyzed the garment sizing system and preferable ease. Collected data were analysed by frequency analysis, t-test, $X^2-test$, and ANOVA using SPSS 12.0 for window. Garment pattern making should reflect the sizes of the body parts well, and simplification of the ordering process would work as an important variable. In relation to the preferable ease, older people preferred more ease while younger people preferred fit ease. In relation to the sizes, people wearing the size of '110' preferred more ease than the size of '90'. And people weighing over 90kg preferred sufficient ease than less weighing. People height over 170cm people preferred sufficient ease for the length between shoulders than height under 170cm. In case of the companies had no consistent sizing system. Significant difference was found in the sizes, except for the size of '100', among those companies, there was significant difference in the length between shoulders and the length of the shirt among those companies and those sizes. Significant body parts for a garment pattern making was height, the circumference of the neck, the chest circumference, the length between biacromion, the arms length, and the waist circumference.

• Journal of Veterinary Clinics
• /
• v.28 no.2
• /
• pp.240-243
• /
• 2011

Several vascular accesses can be used for catheter guided coil embolization for occluding patent ductus arteriosus (PDA). Although trans-femoral approach is most commonly used in dogs, it is often unable to insert angiocatheter for inserting the coil delivery system, especially small puppies weighing less than 2 kg of body weight. Therefore this case study developed trans-carotid method for puppy using JR coronary catheter and free push delivery system. Using this new method, we successfully treated a puppy with PDA weighing 1.25 of body weight.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2024

Crud is a corrosion deposit that forms in equipments and piping of nuclear reactor's primary systems. When crud circulates through the reactor's primary system coolant and adheres to the surface of the nuclear fuel cladding tube, it can lead to the Axial Offset Anomaly (AOA) phenomenon. This occurrence is known to potentially reduce the output of a nuclear power plant or to necessitate an early shutdown. Consequently, worldwide nuclear power plants have employed ultrasonic cleaning methods since 2000 to mitigate crud deposition, ensuring stable operation and economic efficiency. This paper details the system configuration of ultrasonic nuclear fuel cleaning equipment, outlining the function of each component. The objective is to contribute to the local domestic production of ultrasonic nuclear fuel cleaning equipment. Additionally, the paper introduces a method for accurately measuring the weight of removed crud, a crucial factor in assessing cleaning effectiveness and providing input data for the BOA code used in core safety evaluations. Accurate measurement of highly radioactive filters containing crud is essential, and weighing them underwater is a common practice. However, the buoyancy effect during underwater weighing may lead to an overestimation of the collected crud's weight. To address this issue, the paper proposes a formula correcting for buoyancy errors, enhancing measurement accuracy. This improved weight measurement method, accounting for buoyancy effects in water, is expected to facilitate the quantitative assessment of filter weights generated during chemical decontamination and system operations in nuclear power plants.

• Journal of Biosystems Engineering
• /
• v.18 no.1
• /
• pp.37-47
• /
• 1993

This study was conducted to develop the on-line monitoring system for plant growth responses. The system consisted of two parts. One system was the measuring system and the other was its controlling system. The established measuring systems were the ultrasonic wave sensor driver for height of plant, the potentiometer for diameter of plant stem, and the weighing system with strain gage application for plant weight. Also, computer program for measurement and controlling was developed, and the whole system was tested by the fabricated plant, and the actual plant growth responses were monitored by the system. When monitoring the actual plant growth responses, even the small amount of plant growth resposes could be measured by the system within tolerable error ranges.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.1
• /
• pp.61-67
• /
• 2013

Wheelchair users have a difficulty in managing their weight because there is lack of measure systems and even though the users have the system, it costs too much. Thus, purpose of this study is for developing the portable weight scale automatic device to help wheelchair users by monitoring their weight on the wheelchairs in real time. Portable weight scale automatic device composed by four strain gauges, and the device was connected with mobile phone so that wheelchair users were able to check their weight in real time. In order to evaluate the device performance, 10 normal subjects and 10 disabled subjects participated in this study. The subjects' truth weight and measured weight by the device are compared. The weigh difference within normal subjects was $0.75{\pm}0.80kg$, and the weigh difference within disabled subjects was $1.02{\pm}0.74kg$. Difference between the truth weigh and the measured weigh were not statistically different. The reason for this error occurred is inaccuracy of the loadcell installation and calibration. If this problems get solved, the measured indicator is expected to help wheelchair users to manage their weight.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.42-49
• /
• 2006

In this paper error-compensating techniques in three-point weighing method to precisely measure unbalance properties such as center of gravity and unbalance moment. In the conventional static methods, 1) fixture-errors, 2) effects of the contact between the fixture and the load scales, and 3) side effect due to the lateral frictional forces acting on the contact points between the fixture and the load scales are the major factors that lead to measurement errors. The proposed error-compensating method perfectly eliminates both the fixture-error and the contact-error simultaneously by manipulating the three measured reaction forces at three different angular locations. Also the friction-error is calibrated by comparing the sum of three reactions with the actual mass of the specimen. A set of measurement is performed using the same measuring system as Lee's, and a comparison of the results from the convectional, Lee's, and the proposed method is provided. The results show that the proposed method effectively compensates the errors listed above.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.2
• /
• pp.1-7
• /
• 2015

As a measure of health, the percentage of body fat has been utilized for many ergonomist, physician, athletic trainers, and work physiologists. Underwater weighing procedure for measuring the percentage of body fat is popular and accurate. However, it is relatively expensive, difficult to perform and requires large space. Anthropometric techniques can be utilized to predict the percentage of body fat in the field setting because they are easy to implement and require little space. In this concern, the purpose of this study was to find a regression model to easily predict the percentage of body fat using the anthropometric circumference measurements as predictor variables. In this study, the data for 10 anthropometric circumference measurements for 252 men were analyzed. A full model with ten predictor variables was constructed based on subjective knowledge and literature. The linear regression modeling consists of variable selection and various assumptions regarding the anticipated model. All possible regression models and the assumptions are evaluated using various statistical methods. Based on the evaluation, a reduced model was selected with five predictor variables to predict the percentage of body fat. The model is : % Body Fat = 2.704-0.601 (Neck Circumference) + 0.974 (Abdominal Circumference) -0.332 (Hip Circumference) + 0.409 (Arm Circumference) - 1.618 (Wrist Circumference) + $\epsilon$. This model can be used to estimate the percentage of body fat using only a tape measure.

• Journal of Korea Port Economic Association
• /
• v.29 no.2
• /
• pp.137-157
• /
• 2013

Korean shipping industry is ranked the fifth largest in the world in terms of deadweight tonnage after Greece, Japan, Germany and China with 55 million DWT as of year 2011, and its size of foreign exchange earning marked 30 billion US dollars. In respect of volume of seaborne trade, it has handled 99% of import and export cargoes. Korean shipping fleets have increased from 420 to 979 ships between year 2003 to year 2011. By reviewing through the relating literatures, it has been found that Shipping Funds under Ship Investment Company Act, and Tonnnage Tax System, worked as positive influences to increase the Korean shipping fleets. However, there is scant of research to examine the following two points: 1) weighing the decision making factors of ship investments for Korean shipping companies, and 2) weighing the influential factors of government shipping policies. In this respect, the aim of this study is to evaluate 8 decision making factors of ship investments for Korean shipping companies, and 8 influential factors of government shipping policies. For weighing the factors, the fuzzy methodology was adopted. As the results, for the side of decision making factors of ship investments, 'shipping market conditions and future prospects', 'ship's price and future prospects, and 'securing cargoes and future prospects' are ranked as top 3 factors. For government shipping policies side, 'shipping finance provided by lease companies', 'establishment of Korea Shipping Guarantee Fund', and 'establishment of Korea Shipping Finance Corporation' are verified as the important factors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1809-1812
• /
• 2013

The bogie of monorail vehicles applies rubber wheel system not steel wheel system. In addition, The structure of the bogie is very complicated because vehicle operates on the elevated road and vehicle drives with wrapping the guide way. When the monorail vehicle applies air brake system, lower device of vehicle may be complex and some devices may be limited. On the other hand, hydraulic brake equipment is compact and not weighing. Braking force is also outstanding compared with air brake so the hydraulic brake equipment is suitable for monorail vehicle. Also urban transit system such as monorail, applies mixed system both friction brake and electric brake in order to save electric energy. But application case of hydraulic brake in the country is very rare because hydraulic brake have difficulty in satisfaction of control requirement and maintenance. Therefore, this study suggests ways to design hydraulic brake system with blending brake for monorail vehicle and applies the ways to future monorail.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.453-455
• /
• 2004

The quality of agricultural products is represented a degree of freshness and a special quality related to a commercial value. To grade cucumber, the charge-coupled device(CCD) camera is only used to measure external qualities like color. size and degree of bended cucumber The processed area of the image replaces the weigh of cucumber. That means there is no longer used the weighing beams. The system consists of Image processing system and distributing system. This paper explains the structure and movement of the automatic grade system and applies the algorithm for deformed cucumber and characteristics of cucumber through image processing to the grade system.