• Journal of applied mathematics & informatics
• /
• 제39권5_6호
• /
• pp.785-804
• /
• 2021

The proposal of new families has been worked out by many authors over recent years. Many ways to generate new families have been developed as the methods of addition, linear combination, composition and, one of the newer, the T-X family of distributions. Using this latter method, Korkmaz et al. (2018) proposed a new class called Weibull Marshall-Olkin-G (WMO-G) family. In the present work, we propose a new distribution, based on the WMO-G family, using the Lomax distribution as baseline, called Weibull Marshall-Olkin Lomax (WMOL) distribution. The hazard rate function of this distribution can be increasing, decreasing, bathtub-shaped, decreasing-increasing-decreasing and unimodal. Some properties of the proposed model are developed. Besides that, we consider method of maximum likelihood for estimating the unknown parameters of the WMOL distribution. We provide a simulation study in order to verify the asymptotic properties of the maximum likelihood estimates. The applicability of the new distribution to modeling real life data is proved by two real data sets.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.53-58
• /
• 2006

This paper has been addressed on the discharge characteristics of the ignition coil by Weibull function. It analyzed discharge number and amount of discharge using Weibull distribution to know the inter-relationship between partial discharge and mileage. We detected the discharge which happens for 10 seconds. The applied voltage increased by 0.5[kV] at discharge inception voltage. We diagnosed failure rate using the shape parameters. As a result, we confirmed that the failure rate was increased, because the shape parameter showed the value of 5 according to increasing mileage degradation. Also, it is considered to increase the degradation of inner insulator of ignition coil. Because failure rate of virgin was increased from 0[%] to 25[%] after degradation, stability analysis of the ignition coil using Weibull analysis is possible.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2353-2360
• /
• 2000

Statistical fatigue properties of metallic materials are increasingly required for reliability design purpose. In this study, static and fatigue tests were conducted and the normal, log-normal, two -parameter Weibull distributions at the 5% significance level are compared using the Kolmogorov-Smirnov goodness-of-fit test. Parameter estimation were compared with experimental results using the maximum likelihood method and least square method. It is found that two-parameter Weibull distribution and maximum likelihood method provide a good fit for static and fatigue life data. Therefore, it is applicable to the static and fatigue life analysis of the spheroidal graphite cast iron. The P-S-N curves were evaluated using log-normal distribution, which showed fatigue life behavior very well.

• Journal of the Korean Data and Information Science Society
• /
• 제7권2호
• /
• pp.263-272
• /
• 1996

임의의 기계에 대한 수명의 분포는 와이블분포를 하는 경우가 흔하다. 그리고 현실적으로 기계의 수명시간을 검정할 때, 시험시간및 여러 환경적인 제약에 의하여 표본으로 주어진 기계의 수명을 모두 관측하기는 어렵다. 그래서, 본 연구에서는 임의 중단모형 하에서 와이블분포의 모수를 최소제곱법(least squares method)을 이용하여 추정하고 기존의 최대우도추정량(maximum likelihood estimates)과 효율성의 측면에서 비교하고자 한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.155-160
• /
• 2005

This paper addresses the discharge characteristics of cross-linked polyethylene according to void by the Weibull function. It analyzes discharge number and amount of discharge using Weibull distribution to identify the inter-relationship between partial discharge and defect. We detected a 10 second discharge. The applied voltage increased by 1 [kV] at discharge inception voltage. As a result, in a no-void specimen, the shape parameter was consistent according to the increase of voltage, whereas, in a void specimen, it increased according to the increase of voltage. As the result, the shape parameter expressed a fixed value at no-void specimen. However, in void specimen, according to increasing voltage shape parameter rapidly increases.

• The Korean Journal of Ecology
• /
• 제23권6호
• /
• pp.435-438
• /
• 2000

Diameter distributions describe forest stand structure information. Prediction equations for percentiles of diameter distribution and parameter recovery procedures for the Weibull distribution function based on four percentile equations were applied to develop prediction system of even-aged slash pine stand structure development in terms of the number of stems per diameter class changes. Four percentiles of the cumulative diameter distribution were predicted as a function of stand characteristics. The predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level. Statistically, no significant differences were detected based on the data from 236 evaluation data sets. This stand level diameter distribution prediction system will be useful in slash pine stand structure modeling and in updating forest inventories for the long-term forest management planning.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권2호
• /
• pp.90-96
• /
• 2000

The technology of preventive maintenance and corrective maintenance is widely applied to ships in order to maintain the good voyageable condition. One of the most important fields of marine engineering is to seek the maximum availability and to solve the stochastic maintenance problem such that the cost for corrective maintenance is minimized. Accordingly, for the purpose of making the most suitable maintenance schedule which minimizes the expected cost function, this paper suggests the method to grasp the failure characteristics by the ship's maintenance data that are collected from the past. And, suggests the method to estimate the optimal maintenance interval by using the dynamic programming and the cumulative hazard rate function attained from the maintenance data.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.142-150
• /
• 2015

The relationship between the number of benthic macroinvertebrate species and the accumulated survey area were investigated in a clean stream and an impaired stream of Korea. Five models to characterize species-area functions were compared, and the Weibull model fitted species-area data well. The other models (Arrhenius, Romell-Gleason, Kylin, Lognormal model) had small or notable bias. The maximum number of species and half-saturation area derived from the Weibull model may be used as the indicators of the carrying capacity and the habitat complexity respectively.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.581-589
• /
• 2004

본 논문에서는 일정진폭 휨인장 및 쪼갬인장 반복하중을 받는 콘크리트의 피로신뢰성과 모델제안을 위하여 도로포장에 사용되는 콘크리트를 대상으로 연구하였다. 실험데이터는 2-모수 Weibull 확률분포함수를 사용하여 신뢰성 해석을 수행하였고, 적합도 검정을 통하여 이를 기반으로 한 모델을 제시하였다. 피로실험은 $150 mm{\times}75 mm$ 시험체의 쪼갬인장피로 실험방법과 $150 mm{\times}150 mm{\times}550 mm$ 시험체의 휨인장피로 실험방법을 적용였으며 일정 진폭 피로하중에 대하여 수행하였다. 두 가지의 실험방법에 대하여 응력 수준 90, 80, $70\%$로 변화하여 실험하고 이때 적용한 응력비는 0.1, 하중재하속도 20Hz, 정현파(sine)를 적용하였다. 연구결과 콘크리트 피로데이터의 분산성으로 인하여 보다 정확한 해석을 위해 두 가지의 해석 기준을 설정하여 제시하였으며, 그래픽방법, 모멘트방법 및 최우도법에 의해 2-모수 Weibull의 매개변수 $\alpha$와 u를 계산하고 이를 이용하여 확률밀도함수(P.D.F)와 누적분포함수(C.D.F)를 도시하였다. 또한, Weibull의 확률분포함수를 이용한 신뢰성 해석은 Kolmogorov-Smirnov의 방법을 사용하여 $5\%$의 유의수준에서 적합도 검정을 수행한 결과 채택되는 것으로 나타났다. 이러한 해석에 기초하여 쪼갬인장피로실험과 휨인장피로 실험에 대한 피로모델을 제시하고 응력수준에 따른 피로수명과 200만회 및 1,000만회에서의 피로강도를 산정하여 제시하였으며 국외의 주요 피로모델과 비교하였다.

• 충청수학회지
• /
• 제29권3호
• /
• pp.385-396
• /
• 2016

Characterizations of probability distributions by different regression conditions on generalized order statistics has attracted the attention of many researchers. We present here, characterization of Pareto and Weibull distributions based on the conditional expectation of generalized order statistics extending the characterization results reported by Jin and Lee (2014). We also present a characterization of the power function distribution based on the conditional expectation of lower generalized order statistics.