• Korean Journal of Organic Agriculture
• /
• v.5 no.1
• /
• pp.67-77
• /
• 1996

The Organic agricultural techinques were investigated through the observations made for 3 years of the actual conditions of a farmer who has been practicing organic agriculture over 21 years. The farmer was a member of the Ichijima-cho Organic Agriculture Association. The Farmer had not performed much of the organic agricultural techinques at the beginning of his farming history. However, he has gradually developed techniques upon the experiences with trial and error. The notable characteristic of his basic organic agriculture was the utilization of a suitable organic fertilizer to make the soil fertile. Crop damages by diseases and insect pests were prevented through a fertile soil, raising of good seedlings, adoption of tolerant varieties and planting at a wide spacing and consequently considering not to use chemical pesticides. Introduction of power weeder for weed control and paddy-upland crop rotation reduced the cost of production for farming. The crop pattern and method of land us such as mix cropping, crop rotation and conversion of paddy field-upland fieldd were appeared to be very important in organic agriculture. The organic agricultural techniques get systematized upon the adaptation the regional ecology and the development of skills of the farmer. The most important point to achieve the success in organic agriculture system is not only by the development of the technical matters but also by the building of healthy relation and understandings between producers and consumers.

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.120-129
• /
• 2018

This experiment was conducted to find the most suitable crop establishment method and weed management practices for transplanted aman rice in Bangladesh. Rice variety Bangladesh Rice Research Institute (BRRI) dhan44 was used as planting materials where three crop establishment methods ($T_1$: direct wet seeding by drum seeder; $T_2$: hand broadcasting; $T_3$: transplanting) and four weeding options ($W_1$: Hand weeding (HW); $W_2$: BRRI weeder+HW; $W_3$: Herbicide+HW; and $W_4$: no weeding) were tested. Among the crop establishment methods, the highest grain yield ($5.12t\;ha^{-1}$) was obtained with the $T_3$, while the highest benefit cost ratio (BCR) of 2.08 was found in $T_2$. In case of the weed management method, $W_1$ showed superior results on the plant $density/m^2$ (139.66) at 60 days after transplanting (DAT), grain yield ($4.97t\;ha^{-1}$), and BCR (2.03). On the other hand, the highest plant dry matter (36.20 g) at 60 DAT and the highest yield ($6.10t\;ha^{-1}$) were obtained in a $T_3W_1$ combination. The results of this study show that the productivity of rice during aman season could be most significantly increased with the use of transplanting ($T_3$) alone, hand weeding ($W_1$) alone, or a combination of the two methods ($T_3W_1$).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.3
• /
• pp.229-238
• /
• 2015

This study was conducted to develop electronic control system of weeding implement that can operated at various areas such as slope land and inclined road side. The weeding implement consists of five main parts; the electronic control system, the hydraulic system, the main frame, the boom and arm mechanism, and the rotary type weeder. And the weeding implement was developed to be attached by three-point hitch of tractor considering the use of electronic control system. As a result, the electronic control test was conducted with the weeding implement attached to tractor in slope land. The results of the electronic control system test showed satisfactory weeding performance.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.86-90
• /
• 1996

This study was to provide the basic information for the development of thermal weeder which uses LPG as fuel. Weed seeds of Digitaria sanguinalis S. and Portulaca oleracea L. mainly developed in fram and forestry nurseries were used as experimental samples. At different irradiation temperature(60, 80, 100, 150, $200^{\circ}C$), the dffects of weed seed species(digitalis, purslane), condition of seed(dry, soaked), and irradiation time(2, 5, 10, 20, 30, 60, 180, 300 sec) on seed viability were investigated was investigated by examining interaction and main effect of experimental factors. The results showed that viability of weed seed was significantly affected by all irradiation temperature tested. Irradiation time significantly affected on viability of weed seed on all levels of irradiation temperature. also, there were interactions between condition of weed seed and irradiation time on seed viability at each irradiation temperature.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.77-77
• /
• 2017

현재 국내의 경우 4륜 승용관리기가 개발되었으나 성능 미비와 편이성 부족으로 승용관리기 및 부속 작업기 보급이 매우 저조한 상태이다. 3륜 승용관리기는 작업기 복부 장착으로 작업의 정밀도, 편이성, 관측의 용이성 향상과 함께 지상고 제고, 차폭 조절, 조향 등의 성능 개선을 기할 수 있다. 국내에서는 3륜 승용관리기용 복부 장착 부속작업기가 거의 개발되어 있지 않으며, 특히 두류 재배에 있어서 일관기계화 작업을 위한 관리작업기의 개발은 매우 필요한 실정이다. 승용관리기에 의한 중경제초는 잡초방제는 물론 물 빠짐과 토양 속 통기가 좋아지고, 지온 조절, 쓰러짐 방지, 부정근 발생을 조장하여 콩의 생육과 결실을 좋게 함으로써 수량이 증가되는 효과가 있다. 따라서 본 연구는 3륜 승용관리기에 적합한 복부장착형의 중경제초기를 설계 제작하였다. 3륜 승용관리기용 중경제초기는 승용관리기의 복부 PTO에서의 구동력 전달을 위한 연결 조인트, 중간축, 기어 및 체인 전동기구, 구동축으로 구성된 동력전달부, 중경제초를 위한 5개의 로타리 날과 후방 1개의 제초날로 구성된 3조의 작업날, 경심 조절을 위한 바퀴, 다양한 조간거리에 적응을 위한 조간조정 나사부, 흙의 비산 방지를 위한 로타리 날 커버 및 케이스, 3륜 승용관리기에의 부착을 위한 프레임 및 부착보조 작업기 이동용 바퀴장치 등으로 구성 설계 제작하였다. 로타리 날은 기존 시판 관리기용 로타리 중경 날을 사용하였는데 진행방향에 역으로 회전하도록 하였고, 날의 회전반경은 약 330 mm, 조당 경운 폭은 약 250 mm, 최대 경심 100 mm로 설계하였다. 조간거리의 조절범위는 수동나사에 의하여 620~900 mm 범위로 무단조절 할 수 있도록 하였다. 중경제초기는 3륜 승용 관리기 복부의 평행링크에 부착되므로 작업기의 이동 및 부착 편이성을 위하여 이동용 바퀴를 설치하였다. 제작된 중경제초기의 크기는 길이${\times}$폭${\times}$높이가 $660{\times}2072{\times}880mm$, 중량은 약 200 kg으로 제작되었다.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.169-174
• /
• 1997

This study was conducted to obtain basic information needed to develop the effective weed control method by using thermal weeder which uses LPG as fuel. For survey of weed distribution in herb field, weed species were investigated at two kinds of herb field of Codonopsis lanveolata and Aster scaber located in Hoengseongkun and Hwacheonkun, Kangwondo. In Codonopsis lanveolata field, Digitaria sanguinalis and Persicaria viridis L were dominated. In Aster scaber field, Digitaria sanguinalis and Erigeron canadensis were dominated. In general, Grasses weeds in herb were more dominated than other broadleaf and Cyperaceae weeds. The treatments of $H_2SO_4$ in weed seeds were more effective for germination of several weeds, compared with that nontreated weed seeds. However, the rate of germination differed depending on weed species and tereatment time of $H_2SO_4. Also, viability of weed seeds was significantly affected by irradiation time and temperature. As the temterature and treatment time of irradiation increased, the rate of germination was decreased.

• Weed & Turfgrass Science
• /
• v.2 no.4
• /
• pp.358-361
• /
• 2013

This study was conducted to determine the weed control effect of false seedbed in organic rice paddy field. False seedbed is one of the preventative weed control method, especially effective in upland vegetable field. False seedbed frequency and methods were examined by varying the processing time in greenhouse and field condition in 2012 and 2013. In greenhouse experiment, shallow recultivation and harrow surface soil was effective to control weed up to 70%. Optimal processing time of false seedbed was when the weed was two or three leaf stages. Under field condition, one-time treatment of false seedbed was 61% of weed suppression rate and two-times of false seedbed treatment was 79% of weed suppression rate. Monochoria vaginalis was still troublesome weed after false seedbed treatment, but the occurrence of Echinochloa oryzoides was decreased after false seedbed treament. Results indicated that false seedbed treatment was very effective to lower early weed occurrence in rice paddy field especially Echinochloa spp. Weed control efficiency of shallow recultivation by weeder hollow and rotary tillage by tractor were 68%, 13% respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.3
• /
• pp.157-163
• /
• 1986

Synthesis and accumulation pattern of Weender components in orchardgrass (Dactylis glomerata L.) cv. Potomac and Baraula, perennial ryegrass (Lolium perenne L.) cv. Reveille and Semperweide and meadow fescue (Festuca pratensis Huds.) cv. Cosmos 11 and N.F.G. were studied under different growth environments and cutting managements. The field experiments were conducted as a split plot design with three cutting regimes of 6-7 cuts at grazing stage, 4-5 cuts at silage and 3 cuts at hay stage from 1975 to 1979 in Korea and West Germany. The results obtained are summarized as follows: 1. Air temperature, rainfalls and solar radiation were found to be an important meteorological factors influenced to synthesis and accumulation of Weender components. Under high temperature and strong solar radiation during summer season in Korea, accumulation of crude fiber and cell-wall constituents (NDF) in the plants, as average of all grass species and cutting regimes, were increased to about 30.1% and 48.7% from 27,9% and 42.9% in spring, respectively, while total nonstructural carbohydrates (TNC) were decreased to 1.52% in summer from 4.01% in spring. In West Germany, the concentration of Weeder components showed little seasonal variation. 2. Crude fiber and neutral detergent fiber (NDF) were shown higher concentration in orchardgrass than those of perennial ryegrass and meadow fescue, but N-free extractions and TNC as well as net energy value were less accumulated in orchardgrass. Orchardgrass contained lower net energy contents with 534 StE. 431 StE and 575 StE/kg for Suweon, Cheju and Freising, respectively, as compared with 624 StE (Suweon), 491 StE (Cheju) and 657 StE/kg (Freising) in meadow fescue.