• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.101-114
• /
• 2001

Transportation enterprises should maintain constant and qualitative operation. Thus, in short period, transportation enterprises don't change supply in accordance with demand. In the result, transportation enterprises don't reduce operation in spite of management deficit at will. In freight transportation type, less-than-truckload(LTL) has more relation with above transportation feature than truckload(TL) does. Because freight transportation supply of TL is more flexible than that of LTL in correspondence of freight transportation demand. Relating to above mention, it appears that shortage of road and freight terminal of LTL is larger than that of TL. Especially in road and freight terminal comparison, shortage of freight terminal is larger than that of road. Shortage of road is the largest in 1990, and improved after-ward. But shortage of freight terminal is serious lately. So freight terminal needs more expansion than road, and shows better investment condition than road. Freight terminal expansion brings road expansion in LTL, on the contrary, freight terminal expansion substitutes freight terminal for road in TL. In transportation revenue, freight terminal's contribution to LTL is larger than that to TL. However, when we adjust quasi-fixed factor - road and freight terminal - to optimal level in the long run, in TL, diseconomies of scale becomes large, but in LTL, economies of scale becomes large. Consequently, it is necessary for TL to make counterplans to activate management of small size enterprises and owner drivers. And LTL should make use of economies of scale by solving the problem, such as nonprofit route, excess of rental freight handling of office, insufficiency of freight terminal, shortage of driver, and unpreparedness of freight insurance.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.47-58
• /
• 2001

For finding both ways of recycling the wood and plastic wastes and solving the problem of free formaldehyde gas emission through manufacturing wood particle-polypropylene fiber composite board without addition of formaldehyde-based thermosetting resin adhesive, control particleboards and nonwoven web composite boards from wood particle and polypropylene fiber formulation of 50 : 50, 60 : 40, and 70 : 30 were manufactured at density levels of 0.5, 0.6, 0.7, and 0.8 g/$cm^3$, and were tested both in the physical and mechanical properties according to ASTM D 1037-93. In the physical properties, control particleboard had significantly higher moisture content than composite board. In composite board, moisture content decreased with the increase of target density only in the board with higher content of polypropylene fiber and also appeared to increase with the increase of wood particle content at a given target density. Control particleboard showed significantly greater water absorption than composite board and its water absorption decreased with the increase of target density. In composite board, water absorption decreased with the increase of target density at a given formulation but increased with the increase of wood particle content at a given target density. After 2 and 24 hours immersion, control particleboard was significantly higher in thickness swelling than composite board and its thickness swelling increased with the increase of target density. In composite board, thickness swelling did not vary significantly with the target density at a given formulation but its thickness swelling increased as wood particle content increased at a given target density. Static bending MOR and MOE under dry and wet conditions increased with the increase of target density at a given formulation of wood particle and polypropylene fiber. Especially, the MOR and MOE under wet condition were considerably larger in composite board than in control particleboard. In general, composite board showed superior bending strength properties to control particleboard, And the composite board made from wood particle and polypropylene fiber formulation of 50 : 50 at target density of 0.8 g/$cm^3$ exhibited the greatest bending strength properties. Though problems in uniform mixing and strong binding of wood particle with polypropylene fiber are unavoidable due to their extremely different shape and polarity, wood particle-polypropylene fiber composite boards with higher performance, as a potential substitute for the commercial particleboards, could be made just by controlling processing variables.

• Journal of Agricultural Extension & Community Development
• /
• v.8 no.2
• /
• pp.159-177
• /
• 2001

This research aims to clarify what kind of competencies are the source of the competitiveness of an enterprise and the standards for the development of human resources. Its specific objectives are the following; First, to develop methods for examining competencies to carry out one’s job. Second, to draw out the competencies necessary for carrying out the jobs by jobs on the basis of the developed methods. Third, to clarify the competencies commonly needed to carry out all kinds of jobs. This study collected materials for drawing out the competencies needed to perform 21 jobs in six job groups. This was done with the help of a panel of professionals. The process for drawing out the competencies required to perform certain job was designed in six steps. These steps combine classical methods using particular reference groups as well as model methods for particular job competencies. The materials for the R&D job were gathered for three months starting from February 2001. Materials from 20 other jobs were also collected three times from the end of May to the end of October 2001. This was done through workshops with professional groups. The highlights of this study are as follows: 1) The results applying the methods developed for drawing out job competencies to the duties of investigation & research part in R&D job were presented as an example. 2) The job competencies of the company totaled 215 in 21 jobs irrespective of overlapping, which means each job has about 10 competencies on the average. 3) The common job competencies of the whole company totaled eight. namely: competency for collecting information/processing/analyzing, communication competency, presentation competency, competency for utilizing the web, competency for planning projects, competency for solving problems, competency for understanding organization/business/products of the company, and competency for satisfying customers.

• Journal of Information Management
• /
• v.39 no.2
• /
• pp.1-25
• /
• 2008

This study is to investigate the user behavior of defense development and test researchers working for A research institute to provide advanced library services. Based on the prior studies about the subject, survey through questionnaires were conducted, and the data analyzed using SPSS 12.0. Results of the analyses are as follows: The researchers generally gathered information 2 to 3 times per month. The major reason for information gathering was to solve problems and do their tasks. They considered accuracy of information as the most important factor when they gather information. Finding and selecting information sources were the most difficult task for them in retrieving, acquiring and using information. They have most frequently used digital materials (67%), printed materials next (26%), and non-book materials (6%). Internet was both the most frequently used and most satisfied information source for the researchers.

• Korean Journal of Ecology and Environment
• /
• v.37 no.3 s.108
• /
• pp.263-271
• /
• 2004

To collect the basic ecological information about the microbial food webs in eutrophic water system with different residence time, the monthly variation of bacterioplankon (bacteria and small-sized cyanobacteria) and nanoplankton (phytoplankton and protists) were examined from December 2000 to September 2001. Kyungan stream is shorter in resident time (ca.5.4 d) than Seokchon reservoir (ca.72 d), even though they showed the same pattern in precipitation. With the basic environments, we examined the biomass (standing crops and its carbon content) of each plankton collected from the surface water. Large-sized planktons flourished in the time of low temperature, while small planktons were in the time of the high temperature period. Especially, in the Kyungan stream with much disturbance by rainfall and outflow, high diversity showed in term of species and cell morphology, compared to that of Seokchon lake. The time-lag relationship remarkably showed between phytoplankton and bacteria in Seokchon reservoir, and between protists and bacteria in Kyungan stream, respectively.

• Journal of Periodontal and Implant Science
• /
• v.53 no.2
• /
• pp.99-109
• /
• 2023

Purpose: The aim of this systematic review was to evaluate the effectiveness of the socket shield technique (SST), an innovative surgical method introduced in 2010, for reducing buccal bone plate resorption. Methods: The review was conducted following the PRISMA guidelines. Clinical studies conducted in humans and investigating the SST were searched on PubMed (MEDLINE), Embase, Web of Knowledge, and Google Scholar in November and December 2021. The implant survival rate, percentage of complications, and clinical parameters (marginal bone loss [MBL], pink esthetic score [PES], and buccal bone plate resorption [BBPR]) were analyzed using the collected data. Results: The initial search resulted in 132 articles. After article screening, the full texts of 19 studies were read and 17 articles were finally included in the review. In total, 656 implants were installed with the SST. Nine of the 656 implants experienced failure, resulting in an implant survival rate of 98.6%. The percentage of complications was about 3.81%. The analysis of clinical parameters (MBL, PES, and BBPR), showed favorable results for the SST. The mean MBL in implants placed with the SST was 0.39±0.28 mm versus 1.00±0.55 mm in those placed without the SST. PES had a better outcome in the SST group, with an average of 12.08±1.18 versus 10.77±0.74. BBPR had more favorable results in implants placed with the SST (0.32±0.10 mm) than in implants placed with the standard technique (1.05±0.18 mm). Conclusions: The SST could be considered beneficial for preserving the buccal bone plate. However, since only 7 of the included studies were long-term randomized controlled trials comparing the SST with the standard implant placement technique, the conclusions drawn from this systematic review should be interpreted with caution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.546-559
• /
• 2021

This research aimed to develop the district unit plan simulation using procedural modeling based on shape grammar. For this, Esri's CityEngine 2020.0 was selected as a main development tool, and Inside Commercial Area in Bangi-dong, Songpa-gu, Seoul as the research site where about 25% of the total area was developed over the past five years. Specifically, the research developed the simulation through the following three phases of Data-Information-Knowledge after selecting necessary parameters. In the Data phase, 2 and 3 dimensional data were obtained by utilizing data sharing platforms. In the next Information phase, the acquired data were generated into various procedural models according to the shape grammar, and the 2D and 3D layers were then integrated using relevant applications. In the final Knowledge phase, three-dimensional spatial analysis and storytelling contents were produced based on the integrated layer. As a result, the research suggests the following three implications for the simulation development. First, data accuracy and improvement of sharing platforms are needed in order to effectively carry out the simulation development. Second, the guidelines for district unit plans could be utilized and developed into shape grammar for procedural modeling. Third, procedural modeling is expected to be used as an alternative tool for communication and information delivery.

• Journal of The Korean Association of Information Education
• /
• v.9 no.4
• /
• pp.607-616
• /
• 2005

The art education in elementary schools pursued by the 7th education course is to nurture more aesthetic human who can live a more beautiful life by applying the beauty they felt and saw, rather than wishing all students to become artists. In other words, it emphasizes on the importance of appreciation activity. However, the reality is that technique-oriented learning is the main in the education field, especially around the academies, and appreciation learning is even more difficulty for students at physical spaces such as galleries who live inisland or distant countries. This study designs and materializes a system providing appreciation learning data in the form of gallery based on 3 dimensional learning pattern, which is similar to form of human senses, to solve the demerits of former appreciation resources being shared around a small number of students.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.180-192
• /
• 2013

Recently, the development of the information-communications industry has created a new paradigm of the ubiquitous and the smart environments. An USN is a typical technology for constructing a ubiquitous environments. But the USN technologies applied in practice have a lot of problems and to solve these problems that this study was to build a test bed. For the creation of the needs of USN technology, we suggest a method and service of monitoring of road hazards combining the USN and the Geographic Information System(GIS). We conduct making the USN equipment relevant provisions surveys, making installation guidelines, construction system and real-time testing. This study is capable of the management of public facilities, real-time monitoring of accident and the environment data and is expected to be expanded to a 3D facility management combineded with BIM in the future.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.3 no.3
• /
• pp.149-153
• /
• 2022

The degree distribution of the plant-pollinator network was identified by analyzing the data in the ecosystem and reproduced by a model of the growing bipartite mutualistic networks. The degree distribution of pollinator shows power law or stretched exponential distribution, while plant usually shows stretched exponential distribution. In the growth model, the plant and the pollinator are selected with probability P_p and P_A=1-P_p, respectively. The number of incoming links for the plant and the pollinator is l_p and l_A, respectively. The probability that the link of the plant selects the pollinator of the existing network given as $A_{k_i}=k^{{\lambda}_A}_i/{\sum}_i\;k^{{\lambda}_A}_i$, and the probability that the pollinator selects the plant is $P_{k_i}=k^{{\lambda}_p}_i/{\sum}_i\;k^{{\lambda}_p}_i$. When the nonlinear growth index is 𝛌_X=1 (X=A or P), the degree distribution follows a power law, and if 0≤𝛌_X<1, the degree distribution follows a stretched exponential distribution. The cumulative degree distributions of plants and pollinators of 14 empirical plant-pollinators included in Interaction Web Database were calculated. A set of parameters (P_A,P_P,l_A,l_P) that reproduces these cumulative degree distributions and a growth index 𝛌_X (X=A or P) were obtained. We found that animal takes very heterogenous connections, whereas plant takes a more flexible connection network.