• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.665-670
• /
• 1999

The shear behavior and strength of simply supported reinforced concrete deep beams with web opening subject to concentrated loads have been investigated experimentally on the effects of structural parameters such as location of web opening and reinforcements. A total of 12 specimens were tested at the laboratory under two-point top loading. The shear span-to-depth ratio was taken constantly 0.8, and various types of reinforcements based on truss models were adopted. In the tests, the effects of location, reinforcements of web openings on the shear behavior, and crack initiation and propagation have been carefully checked and analyzed. The test results have been compared with the formulas proposed currently being used and analyzed by nonlinear finite element method. Shear strengths obtained from the tests showed good matches with Kong and Ray's equation, and also with the results calculated by nonlinear finite element method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.369-374
• /
• 1999

A practical approach of calculating the ultimate strength of composite beams with unreinforced web opening is proposed. In this method, the slab shear contribution at the opening is calculated as the smaller of the shear strength of the slab and the pullout capacity of the shear connectors at the high moment end. A simple interaction equation is used to predict the ultimate strength under simultaneous bending moment and shear force. Strength prediction by the proposed method is compared with previous test results and the predictions by other analytical method. The comparison shows that the proposed method predicts the ultimate capacity with resonable accuracy.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.378-381
• /
• 2006

Test results of four reinforced concrete two-span continuous deep beams are summarized. Main variables were the configuration of web opening reinforcement. Shear span-to-overall depth ratio and the size of the web opening were fixed by 1.0 and 0.5 a $\times$ 0.2 h, respectively. To control diagonal crack and enhance strength, it can be recommended that diagonal reinforcement crossing the crack plane joining between loading points and corner of openings should be provided.

• Advances in concrete construction
• /
• 제2권4호
• /
• pp.281-300
• /
• 2014

This study presents the experimental results of twenty three reinforced concrete beams with rectangular web openings externally strengthened with Fiber Reinforced Polymers (FRP) composites bonded around openings. All tested beams had the same geometry and reinforcement details. At openings locations, the stirrups intercepted the openings were cut during fabrication of reinforcement cage to simulate the condition of inclusion of an opening in an existing beam. Several design parameters are considered including the opening dimensions and location in the shear zone, the wrapping configurations, and the amount and the type of the FRP composites in the vicinity of the openings. The wrapping configurations of FRP included: sheets, strips, U-shape strips, and U-shape strips with bundles of FRP strands placed at the top and sides of the beam forming a fan under the strips to achieve closed wrapping. The effect of these parameters on the failure modes, the ultimate load, and the beam stiffness were investigated. The shear contribution of FRP on the shear capacity of tested beams with web openings was estimated according to ACI Committee 440-08, Canadian Standards S6-06, and Khalifa et al. model and examined against the test results. A modification factor to account for the dimensions of opening chords was applied to the predicted gain in the shear capacity according to ACI 440-08 and CSA S6-06 for bonded Glass Fiber Reinforced Polymers (GFRP) around openings. The analytical results after incorporating the modification factor into the codes guidelines showed good agreement with the test results.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.697-704
• /
• 2003

본 연구의 목적은 장방형 개구부를 갖는 철근콘크리트 깊은 보에서 개구부 폭, 깊이 및 위치변화와 부재의 전단거동의 관계를 파악하고, 최대내력을 예측하기 위한 모델을 제시하는데 있다. 주요 변수로는 콘크리트 강도, 전단경간비, 개구부 폭, 깊이 및 위치 등이다. 시험체는 모두 25개이며 2점 대칭가력하였다. 실험결과로부터 개구부를 갖는 깊은 보의 전단거동은 개구부 크기와 전단경간비에 의해 가장 큰 영향을 받았으며, 이들이 증가할수록 이들이 증가 할 수록 콘크리트 설계기준은 불안전측에 있었다. 따라서 개구부 상$.$하 스트럿 작용과 주철근의 타이작용을 고려하여 개구부 효과를 반영한 깊은 보의 전단내력을 적절히 평가할 수 있는 모델을 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권3호
• /
• pp.149-158
• /
• 2004

본 연구는 유효전단스팬에 대한 깊이의 비가 1.0인 깊이가 큰 보에 대해서 유효전단영역내에 개구부에 대한 파괴 메카니즘의 변화와 전단파괴된 후 보수 보강에 따른 부재 내력의 복원력에 관한 연구로서, 그 결론는, 전단파괴한 유공보 시험체의 초기사균열 하중은 시험체 간에 큰 차이가 없어 시험체의 배근형태에 영향을 받지 않는 것으로 나타났으며, 아라미드 시트로 보강된 시험체의 균열 및 파괴형태는 중앙부의 휨 균열과 전단지간의 사균열이 동시에 발생한 후, 최대내력근처에서 유공측의 전단균열이 확대되어, 시트면의 중앙부위가 박리되면서 전단파괴 되었다. 전단파괴된 깊이가 큰 보 시험체를 아라미드 섬유시트로 보강한 결과 보강전과 비교하여 최대내력은 최소 34.4%, 최대 83.8%의 증가를 나타내어 파괴전의 내력을 복원하는 것으로 나타났다.

• Computers and Concrete
• /
• 제33권3호
• /
• pp.251-264
• /
• 2024

The present study pertains to the effects of variations in the location and size of drilled web openings on the behavior of fixed-fixed reinforced concrete (RC) beams. For this purpose, a reference bending beam with a transverse opening in each half span was tested to failure. Later, the same beam was modeled and analyzed with the help of finite element software using ABAQUS. Upon achieving close agreement between the experimental and numerical results, the location and size of the web opening were altered to uncover the effects of these factors on the shear strength and load-deflection behavior of RC beams. The experimental failure mode of the tested beam and the numerical results were also verified by theoretical calculations. In numerical analysis, when compared to the reference (D0) specimen, if the distance of the opening center from the support is 0 or h or 2h, reduction in load-bearing capacity of 1.5%-22.8% or 2.0%-11.3% or is 4.1%-40.7%. In other words, both the numerical analyses and theoretical calculations indicated that the beam behavior shifted from shear-controlled to flexure-controlled as the openings approached the supports. Furthermore, the deformation capacities, energy absorption values, and the ductilities of the beams with different opening diameters also increased with the decreasing distance of the opening from supports. Web compression failure was shown to be the predominant mode of failure of beams with large diameters due to the lack of sufficient material in the diagonal compression strut of the beam. The present study indicated that transverse openings with diameters, not exceeding about 1/3 of the entire beam depth, do not cause the premature shear failure of RC beams. Finally, shear damage should be prevented by placing special reinforcements in the areas where such gaps are opened.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2003년도 가을학술발표대회
• /
• pp.66-67
• /
• 2003

• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.101-110
• /
• 2000

A practical approach of calculating the ultimate strength of composite beams with unreinforced web opning is proposed through shear behavioral tests. In this method, the slab shear contribution at the opening is calculated as the smaller value of the pullout capacity of shear connector at the high moment end and the one way shear capacity of slab. A simple interaction equation is used to predict the ultimate strength under simultaneous bending moment and shear force. Strength prediction by the proposed method is compared with previous test results and the predictions by other analytical methods. The comparison shows that the proposed method predicts the ultimate capacity with resonable accuracy.

• 전산구조공학
• /
• 제8권4호
• /
• pp.149-158
• /
• 1995

열간압연된 형강은 수직재나 휨재 등으로 사용할 때 파이프나 덕트 등의 설비에 필요한 공간을 확보하기 위해 웨브에 개구부를 두기도 한다. 개구부를 갖는 형강의 웨브는 면내력을 받는 사각형 평판으로 고려하여 좌굴하중을 구하였다. 재하변은 단순지지로 하고 재하변은 직각인 변은 탄성지지단으로 보고 해석하였으며, 국부좌굴에 대한 보강을 위해 개구부 주위(하중 방향과 평행한 두변)에 보강재를 두어 단면 손실에 대한 좌굴하중의 감소를 보강하였다. 본 연구에서는 평판에 대한 고전적인 이론해와 유한요소에 의한 해석해를 비교하여, 해석에 대한 해의 정확성을 검증한 후 개구부의 크기, 보강재의 크기와 탄성지지단의 비틀림 상수의 변화에 대한 효과를 알아보았다. 그 결과 이론해와 해석해의 오차는 0.31%로 상당히 정밀한 해석해를 얻었으며, 비틀림 상수의 크기와 보강재의 크기에 따라 유공 보강판의 효과적인 개구부 크기를 결정하였다.