• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.731-736
• /
• 2023

Walking is a periodic motion that contains specific phases and is a basic movement method for humans. Through gait analysis, various musculoskeletal health conditions can be identified. In this study, we propose a calf wearable sensor system that can perform gait analysis without space limitations. Using a ToF(: Time-of-Flight) sensor that measures distance and an IMU(: Inertial Measurement Unit) sensor that measures inclination the heel trajectory of walking was derived by proposed method. In case of abnormal gait with risk of fall, gait is evaluated by analyzing the change pattern of the heel trajectory.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.593-603
• /
• 2019

In wearable healthcare systems, sensor devices can be deployed in places around the human body such as the stomach, back, arms, and legs. The sensors use tiny batteries, which have limited resources, and old sensor batteries must be replaced with new batteries. It is difficult to deploy sensor devices directly into the human body. Therefore, instead of replacing sensor batteries, increasing the lifetime of sensor devices is more efficient. A transmission power control (TPC) algorithm is a representative technique to increase the lifetime of sensor devices. Sensor devices using a TPC algorithm control their transmission power level (TPL) to reduce battery energy consumption. The TPC algorithm operates on a closed-loop mechanism that consists of two parts, such as sensor and sink devices. Most previous research considered only the sink part of devices in the closed-loop. If we consider both the sensor and sink parts of a closed-loop mechanism, sensor devices reduce energy consumption more than previous systems that only consider the sensor part. In this paper, we propose a new approach to consider both the sensor and sink as part of a closed-loop mechanism for efficient energy management of sensor devices. Our proposed approach judges the current channel condition based on the values of various body sensors. If the current channel is not optimal, sensor devices maintain their current TPL without communication to save the sensor's batteries. Otherwise, they find an optimal TPL. To compare performance with other TPC algorithms, we implemented a TPC algorithm and embedded it into sensor devices. Our experimental results show that our new algorithm is better than other TPC algorithms, such as linear, binary, hybrid, and ATPC.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.8
• /
• pp.253-258
• /
• 2015

From the point of view of u-healthcare, heart rate is so useful for both illness for taking care of patients and wellness for improving the level of health and wellbeing. It is because heart rate is a significant clinical variable for all kinds of diseases as well as an indicator of the intensity of exercise. Recently, a number of various wearable heart rate monitors have been released to check people's status in the body by monitoring their heart rates. In addition, a number of smartphone applications have been released to conveniently monitor the status of exercise by using heart rate monitors. However, all of these applications are limited to a personal usage. In this paper, we will design a system to simultaneously monitor heart rates coming from multiple users in a real-time, and develop an Android application to apply the system. The application mainly features a simultaneous monitoring of heart rates coming from multiple users, allowing to be effectively applied to fitness centers.

• Journal of Information Technology Applications and Management
• /
• v.28 no.3
• /
• pp.49-58
• /
• 2021

Due to the increasing interest in wellness aroused by the aging population and the pursuing feature of active old age, Korean elderly set importance on long life with their healthy condition. Following the change in the paradigm of the medical delivery system from hospital-oriented, treatment-oriented to personal-centered and self-care, Service design application of Smart Healthcare for the elderly became valuable. Smart Healthcare is a healthcare service provided through the fusion of ICT technologies including mobile/wearable devices, IoT, big data, and information technology, and it is utilized to prevent diseases managing abundant health information and living habits. As a methodology for delivering such Smart Healthcare to the elderly, Service design can be adopted. Therefore, this study would like to present the perquisites of Smart Healthcare design for the elderly through analyzing the results from in-depth interview methods between the elderly and medical staff. As a result of this study, guidelines for Service design application of health vulnerability management for the elderly utilizing smart phones were presented. Therefore, this study presented four prerequisites composed of 'high level of supplementation and ethical decision making', 'improvement of inequality in accessibility and experience', 'resolving problems in policy implementation' and 'user-friendliness' for the Smart Healthcare service design for the elderly. Overall, Service design is expected to play an innovative role in improving the quality of life for the elderly through the process of collecting and delivering information on Smart Healthcare centered on the experience of the elderly.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.372-377
• /
• 2014

Being able to monitor the heart will allow the diagnosis of heart diseases for patients during daily activities, and the detection of burden on the heart during strenuous exercise. Furthermore, with the help of U-health technology, immediate medical action can be taken, in the case of abnormal symptoms of the heart in daily life. Therefore, it appears to be necessary to develop the corresponding technology to monitor the condition of the heart daily. In this study, a novel wearable smart system was proposed, to monitor the activity of the heart in daily life, and to further evaluate the rhythm of arrhythmia. The wearable system includes three modified bipolar conductive fiber electrodes in the chest part, which can resolve the reduction problem of the magnitude of the signal, by magnifying the signal and removing the noise, to obtain high affinity and validity for medical-type usage (<0.903%). The biological signal acquisition and data lines, and the signal processing engine and communication consist of a conductive ink, and the pic18 and ANT protocol nRF24AP2, respectively. The proposed algorithm was able to detect a strong ECG, signal and r-point passing over the noise. The confidence intervals were 96 %, which could satisfy the requirement to detect arrhythmia under the unconstrained conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.813-820
• /
• 2009

This paper describes the realization of ubiquitous healthcare monitoring system using wearable pulse oximeter based on a wireless sensor network. In order to obtain information of oxygen saturation from a patient, a small size and low power consumption wearable pulse oximeter was designed. Information of oxygen saturation collected by wireless sensor node was transmitted wirelessly to a base-station for storage and display purposes via wireless sensor network. Wireless sensor nodes were programmed by TinyOS application to perform data acquisition and transmission. Lab VIEW server program was designed to monitor information of oxygen saturation and process the measured PPG (photo plethysmogram) signals to APG(Accelerated plethysmogram) signals by appling second order derivatives. PPG signals are simple and cost effective technique to measure blood volume change.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.14-22
• /
• 2011

It is important for the strategy of service to provide the health information in the environment that the healthcare has been changed focusing on the preventive medicine. Recently, the various applications of u-healthcare have been presented by researchers. In this paper, we proposed the health information monitoring system using the context sensors based band. By wearing the proposed hand, the health status is gathered and vital signals are transmitted to the connected UMPC. It can be easily monitored according to the user locations in real time. To provide the health index according to the temperature, the air conditioning, the illumination, the humidity, and the ultraviolet rays, we use the various XML links extracted from RSS of the Korea Meteorological Administration. The health information is analyzed in terms of factors, such as, the asthma index, the stroke index, the skin disease index, the pulmonary disease index, the pollen concentration index, and the city high temperature index. Ultimately, this paper suggests empirical application to verify the adequacy and the validity with the proposed system. Accordingly, the satisfaction and the quality of services will be improved the healthcare.

• Journal of Sensor Science and Technology
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2015

The Microsoft Kinect is a motion sensing input device which is widely used for many motion recognition applications such as fitness, sports, and rehabilitation. Until now, most of remote rehabilitation systems with the Microsoft Kinect have allowed the user or patient to do rehabilitation or fitness by following the motion of a video screen. However in this paper we propose a smart remote rehabilitation system with the Microsoft Kinect motion sensor and a wearable ECG sensor which can allow patients to offer monitoring of the individual's performance and personalized feedback on rehabilitation exercises. The proposed noble smart remote rehabilitation is able to monitor and measure the state of the patient's condition during rehabilitation exercise, and transmits it to the prescriber. This system can give feedback to a prescriber, a doctor and a patient for improving and recovering motor performance. Thus, the efficient rehabilitation training service can be provided to patient in response to changes of patient's condition during exercise.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.145-146
• /
• 2010

This paper proposed a new concept of global healthcare system based on M2M technology with the combination of networks by using IPv6 techniques. The proposed system consists of 6LoWPAN based wearable sensors, gateway for the connection of different networks, and server program offering health information. Thus our approach presents an intelligent system which allows direct exchange of information between machines without human assistance with the epoch-making extension of measurement environment in healthcare areas appropriately.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.43-47
• /
• 2007

In this paper, we propose a novel sensor system for measuring the arterial pulse in an oral cavity. In order to measure pulse wave in oral cavity, the proposed system is designed with reflection type arterial wave sensor, not by using transmission type arterial pulse wave sensor. Driving circuit through pulse current is designed for solving self-heating problem of LED. The effectiveness of the proposed sensor system is compared with pulse wave between pulse wave of oral cavity and other body parts as well as with characteristic measurements. The experiment shows that the proposed sensor system is adaptive to capturing consecutive and meaningful biometric signals through the variation of pulse wave changes in oral cavity when exercising. The study result expects to design and develop mobile sensors which could be adapted to healthcare devices.