• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.838-849
• /
• 2000

The purpose of this study was to investigate use and purchase behavior of sleeping wear for summer. Subjects in this study were composed of 591 males and females aged from twenties to fifties, living in Taejon and Chongju. For data analysis, descriptive analysis, $\chi$$^2$-test, t-test, ANOVA, and factor analysis were used. The results are as follows. First, subjects used sleeping wear(a night gown and pajamas), and home wear(T-shirts and sweat suit with zippered top) with similar rates. The subjects, who are females, married, older and have professional jobs, owned sleeping wear such as a night gown and pajamas more than home wear. Also, the mean of using pajamas was the highest, and they were satisfied with them more than others who didn't wear them. Second, one-third of consumers purchased sleeping wear once a year in a specialty store. Consumers mainly searched for information regarding sleeping wear in the display section. Most consumers weren't influenced by others when they made their purchases. When consumers decided to purchase a product, they considered six criteria such as fabric/management, wearing/fitness, esthetic, service, symbolic status, and economic for evaluating. Among them, the factor wearing/fitness was considered the most important. These results imply that consumers would be conscious of sleeping wear even though sleeping wear and home wear are used interchangeably. In addition, consumer behavior concerning sleeping wear is different from their characteristics such as sex, age, occupation, the level of education, and marital state. Therefore, the markets with sleeping wear would be able to be segmented based on consumers’characteristics. Also, marketers should focus on distribution channels to reform the markets of sleeping wear, that is, they may offer products in specialty stores. Additionally, market managers would be able to concentrate on visual merchandising in stores in order to increase brand awareness and market share.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.33-41
• /
• 2014

Fretting is a kind of surface degradation mechanism observed in mechanical components and structures. When two pieces of materials, pressed together by an external static load, are subjected to a transverse cyclic loading or various vibrations, so that one contacting face is relatively displaced cyclically parallel to the other face, wear of the mating surfaces occurs. These fretting damages may be observed in electrical connectors for automotive components, where there are special environments and various vibration conditions. This study aims to evaluate the usefulness of fretting test equipment that was developed for reliability test of electrical connector. Fretting tests were carried out using tin coated connectors and friction force, contact resistance, contact area and roughness of contact region were investigated. The following results that will be helpful to understand the fretting wear mechanism, increase process the contact resistance and contact area were obtained. (1) In the same frequency and slip amplitude, the friction force, roughness and contact area increased rapidly until about $10^3$ cycles, after which it was slightly changed. (2) In the various frequency and slip amplitude, the contact area increased with slip amplitude and cyclic numbers, but it did not depend on cyclic frequency. (3) The surface roughness of contact region did not depend on the cyclic frequency. From these results, the applicability of the fretting wear test equipment and reliability of connector were discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1021-1024
• /
• 2001

Out of all metal-cutting processes, the hole-making process is the most widely used. It is estimated to be more than 30% of the total metal-cutting process. It is therefore desirable to monitor and detect drill wear during the hole-drilling process. In this paper, the vision system of the sensing methods of drill flank wear on the basis of image processing is used to detect the wear pattern by non-contact and direct method and get the reliable wear information about drill. In image processing of acquired image, median filter is applied for noise removal. The vision flank wear area of the drill was measured. Backpropagation neural networks (BPns) were used for no-line detection of drill wear. The neural network consisted of three layers: input, hidden and output. The input vectors comprised of spindle rotational speed, feed rates, vision flank wear, thrust and torque signals. The output was the drill wear state which was either usable or failure. Drilling experiments with various spindle rotational speed and feed rates were carried out. The learning process was peformed effectively by utilizing backpropagation. The detection of the abnormal states using BPNs achieved 96.4% reliability even when the spindle rotational speed and feedrate were changed.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.131-137
• /
• 2009

A pair of connectors for transferring torque is widely used in various types of a mechanical system. By the repetition of mechanical contact between a pair of connector, wear occurs easily. This kind of defect sometimes can cause a serious problem of health in case of the connector is used in a refrigerator. In this work, the material combination of connectors was experimentally studied to reduce the amount of wear; for the combination of connectors, various types of engineering materials including polyacetal, polycabonate, stainless steel (STS-304), NiP coated STS-304, and STS-310 were evaluated to check each wear behavior. Also an effective method of wear test was suggested for precise controlling of wear conditions such as contact area, contact force, and relative motion speed. From the test results, it was found out that a pair of polyacetal to STS-304 and STS-310 showed the lowest specific wear rates among other pairs.

• Journal of Powder Materials
• /
• v.20 no.4
• /
• pp.297-301
• /
• 2013

Mirror surface machining for large area flattening in the display field has a problem such as a tool wear and a increase in machining time due to large area machining. It should be studied to decrease machining time and tool wear. In this paper, multi-tool machining method using a PCD tool and a SCD tool was applied in order to decrease machining time and tool wear. Machining characteristics (cutting force, machined surface and surface roughness) of PCD tool and SCD tool were evaluated in order to apply PCD tool to flattening machining. Based on basic experiments, the PCD/SCD multi-tool method and the SCD single-tool method were compared through surface roughness and machining time for appllying large area mold machining.

• Journal of the Korean Society of Costume
• /
• v.60 no.6
• /
• pp.11-22
• /
• 2010

Purpose: The purpose of this study is to develop golf wear textile design, produce simulation and samples, and create original designs using geometric patterns. Significance: If modern people's trend to pursue well-being is be associated with healthy and active lifestyle and the design which combines a sport sense into artistic image appears in golf wear, it is a very significant effort to settle the role of sport as a mega trend. Contents: This study examined the general concept of geometric patterns and the situation and characteristics of women's golf wear. Finally, the design and simulation of gold wear textile were proposed. Study Instruments: For theoretical research, articles, books, literatures, and Internet materials published at home and abroad were reviewed and collected. For empirical research, a dot, a stripe(a line), a square, and an oval were selected and simulation was tested visually after the development of textile designs. Finally it was directly produced and golf wear design was developed. Photoshop CS 3 and Wacom intuos 3 were used as a general-purpose program and hardware respectively. DTP printing was used for sample work. Based on research results, geometric patterns range broadly and diversely from prehistoric remains and relics to contemporary art, design, architecture, and fashion. It is a unique formative element with value and attraction as the infinite object of inquiry beyond an area and the times. The combination of geometric patterns with art touch could complement the rigidity of design. It contributed to the perception of important role of art in the design area, namely, the importance of design containing artistry.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.99-105
• /
• 2019

This study presents an experimental investigation of the wear and oxidation of the bristles of a brush seal in a super-heated steam environment. We construct a model reflecting normal force and radial interference to predict the amount of wear. To monitor the volume loss of the bristle induced by the swirl phenomenon of the rotor, we measure the clearance between the rotor and the brush seal by using a non-contact 3-D device. We calculate the area by using the area-wise measurement method. Considering the obvious brush seal wear variables, we use two disks with different roughness($Ra=0.1{\mu}m$ and $100{\mu}m$) to determine the effect of roughness on wear. Considering an actual steam turbine, we utilize a steam generator and super-heater to generate a working fluid (0.95MPa, 523.15K) that has high kinetic energy. We observe the abrasion of the bristles in the hot steam environment through a scanning electron microscope image. This study also conducted energy dispersive X-ray (EDX) analysis for a qualitative evaluation of local chemistry. The results indicate that the wear and elimination of bristles occur on the disk with high roughness, and the weight increases due to oxidation. Furthermore these results, reveal that the bristle oxidation is accelerated more under super-heated steam conditions than under conditions without steam.

• Journal of Fashion Business
• /
• v.3 no.1
• /
• pp.65-80
• /
• 1999

In this study, the researcher studied the historical background and the traditional culture about dress and ornament of Yunnan Province of China. The Results of the study are as follows. 1. In the Past, Derung's dress was very simple due to the influence of various factors, such as geography and history. Men wore shorts and covered diagonally a piece of cloth from left shoulders to right armpits and tied up the two ends on chests. Women covered crisscross two pieces of cloth from both shoulders to knee. 2. Achang people's dress and adornment has its own unique characteristic. Generally, men wear Jackets with buttons down the front and black trousers. Unmarried men like to wear white turbans, while most of married men usually wear dark blue ones. Women usually wear tight-sleeve blouses with buttons down the front and skirts. Unmarried women wear the hair in braids coil them on the top of their heads. They wear short blouses and trousers. Married women wear their hair Into buns and like to entwine black or blue cloth into high trubans. They wear short blouses and knee-length straight skirts. Achang knife enjoys high reputation and has a long history and an exquisite workmanship. All the men like to wear it. 3. The dress and adornment of the Lahu nationality has both the characteristic of farming culture and the style of nomadic culture of early times. Men usually wear short shirts with round necks and buttons down the front, loose-legged trousers, turbans or dark blue cloth caps Women's dress and adornment can be categorized into two styles. One is black cloth gown with buttons diagonally on the right front and waist-length slits on both sides. The edges of fronts and cuffs are edged with Silver ornaments and lace. They also wear trousers. The other is short blouse with round neck and short opening on th right front, straight skirt and colourful leggings with embroidered patterns. 4. The Hani people, men and women, old and young, like black colour and are fond of wearing black clothes. Men usually wear shirts with buttons down the front and trousers, entwining their heads with black or white cloth. The elderly people wear calottes. Women wear cloth blouses, skirts and trousers or shorts. Slight differences exist in the clothing and adornments according to region, branch and age 5. Blang people's dyeing technique with an exquisite method has a long history. Men wear dark blue long sleeve shirts with round necks and buttons down the front or arranged diagonally on the front and loose-legged trousers. Elderly men wear big turbans wdress and adornment varies greatly in different regions. 6. The Lisu people culture of dress and adornment has some unique characteristics. The styles and colours of their dress and adornment differ slightly from place to place. In the Nujiang area, Women wear black velvet Jackets over blouses with buttons arranged diagonally on the right front and long pleated ramie skirts. Men usually wear wraparound ramie gowns, with center vent, made of fabrics alternated with white and black cross stripes. They also wear cloth waistbands and trohile youngsters keep their hair short. Women's users. In the Lushui area, the dress and adornment is similar to that in the Nujing region, but women wear aprons and trousers instead of skirts. 7. The Nu people dress and adornment is simple but elegant Women are proficient in ramie-weaving. Men usually wear gowns With overlapping necks, knee-length trousers and leggings. They like to wear their hair long and entwine dark blue or white turbans. Women wear black and red vests over blouses with buttons arranged diagonally on the right front and ankle-length skirts. They also wear their hair long, make it into braids, and entwine dark blue or colourful cloth turbans. 8. Pumi men usually wear ramie shirts With buttons arranged diagonally on the right front, loose trousers and white sheepskin vests. Some also wear overcoats made of "pulu". Women's dress and adornment varies in different areas. In the Lanping and Weixi regions, women wear white short blouses with buttons arranged diagonally on the front and dark brown embroidered vests. They also wear trousers and blue or black cloth turbans. In the Ninglang and Yongsheng regions, women wear hemmed blouses With buttons arranged diagonally on the right front and drape sheepskin capes. They also wear white pleated skirts and use broad colourful cloth as their waistbands.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.271-286
• /
• 2015

This study presented functional designs for development of functional compression wear for men in their forties based on body muscles as well as designed 2D patterns using 3D standard body form data of men in their forties. Patterns with an optimal stretch rate were proposed through a comfort evaluation. Different material was used for different areas such as the sports ability strengthening areas including body parts that often move for sports (such as the shoulders, abdomen and lower arm), areas that require ventilation for perspiration (such as the chest and back center, and armpits), and stable form areas (such as the chest, waist and elbows). The front and back surface areas of the developed pattern was an average 102.4% size compared to the body surface area. The results indicated that the 90% reduction pattern showed changes in pressure value according to area of movement, had the best breathability when worn, and had the best, most comfortable fit compared to the other subjects. The clothing pressure values of the pattern were around 22.1-23.4mmHg for the arm area (which has a big movement range and has many muscles) and 10.4-11.8mmHg for chest and abdomen areas related to major organs and breathing, indicating appropriate clothing pressure. A compression wear top pattern with pressure appropriate to the target age range and excellent appropriateness for the body form will be developed for men in their forties. A study method will be proposed to develop design technology for ergonomic compression wear tops with excellent fit and comfort.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.38-45
• /
• 1996

A new grinding wheel was developed for the high performance grinding of difficult-to-grinding materials. The grinding performance of the newly developed wheel including grinding forces, grinding ratio, and surface roughness of ground surface was evaluated through experiments. Experimental results show that the performance of the newly developed wheel is superior to the conventional alumina wheel and comparable to the Sol-gel wheel. An experimental investigation on the wear of alumina grinding wheel was also carried out. The experiments consist of the measurements of fracture strength of the abrasive grains, grinding force, and the area of wear flats of grinding wheels. Microscopic examination of abrasive grains was executed to observe the progress of wheel wear. The results indicate that the 32A grain, which has relatively lower fracture strength, wears out faster than 5SS and 5SG. The wheel wear occurs much faster in wet grinding than in dry grinding. It has also been found that the grinding forces increase logarithmically with increasing wear flats.