• Journal of the Korean Society of Costume
• /
• v.60 no.5
• /
• pp.88-105
• /
• 2010

The purpose of this study is to grasp the actual wearing conditions, inconvenience and problems with cycle wear. To attain this purpose, a questionnaire was completed by direct observation and by interviewing bicyclists. The questionnaire was given to 273 bicyclists. The questionnaire consisted of items that are related to concerns with dressing appropriately and enhancement of physical performance through dress. Following are the results of this study. According to the survey, many of them purchased imported cycle wear rather than national cycle wear, and the satisfaction according with purchase rate was low. Bicyclists were uneasy with finding right size cycle wear especially for women. It turned out that the area of the knee and elbow are mostly the areas that they get hurt while riding. Even though the knee and elbow are the mostly hurt area, bicyclists do not prefer to wear appropriate protector for the knee and elbow to excel in their performance in cycling. In material related questions, lower dissatisfaction was indicated for the lints caused by fraction. Average satisfaction was indicated for the distortion after washing, changes in color, touch of the fabric, matters with static and sweat. With regard to the areas where the bicyclists felt discomfort was highly indicated with lower-body clothing. Discomfort was highly indicated with crotch area when riding long period of time. Also when riding a cycle, discomfort was indicated with the leggings cuffs when it comes upward with riding motion. Most of the bicyclists felt the tight fitting leggings were embarrassing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1287-1294
• /
• 2003

The wear process of end mill is so complicated process that a more reliable technique is required for the monitoring and controlling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for 4 cases using the high-speed-steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. As the cutter impacts the workpiece surface, a situation of farced vibration arises in which the dominant forcing frequency is equal to the tooth passing frequency of the cutter. The tooth passing frequency appears as a harmonics form, and end mill flank wear is related with the first harmonic. It is possible to detect end . mill flank wear. This paper proposed the new method of the end mill wear detection.

• Journal of Korea Foundry Society
• /
• v.28 no.5
• /
• pp.237-241
• /
• 2008

This study has been carried out to investigate the wear and heat resistant properties of durable moldwash agent for Al gravity casting according to mold washing process conditions. The wear properties of coated specimen were performed by sliding wear testing machine and heat resistance were evaluated by measuring the loss of coated moldwash agent during emerging of coated specimen in Al melts. During testing, experimental variables were mold surface temperature, moldwash agent/distilled wear, and additive concentrations. The lower additive concentration and mold temperature caused the smooth surface roughness of coated specimen, It was found that the specimen coated with moldwash/water ratio 1:3, additive concentration 9wt% and mold temperature higher than $200^{\circ}C$ showed superior wear and heat treatment. Also, these results were supported by fluidity test.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.148-154
• /
• 1999

This study was carried out to verify grinding performance of dental diamond bur and investigate the possibility of AE application in dentistry field. Workpieces were made of acryl and bovine respectively for the experiments in this study. Grinding test was conducted to get the data of grinding resistance and specific grinding energy of four different types of diamond bur by using tool dynamometer. AE signal was acquired to verify grinding process in the AE measuring system. Tool wear was observed to find parameters about grinding characteristics of diamond bur by means of SEM picture. It was found that the wear of dental diamond bur could be detected with polishing of grinding material, removal of adhesive parts, wear of particles neighboring cutting nose, loss of material and elevation of temperature. The wear of B, C, D type diamond bur is due to wear and fracture of grain size. Abnormal state can be found through the behavior of AE signal in the grinding working. As a result, it is expected that forecast of abnormal state is possible using AE equipments under real time process.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.5-13
• /
• 2016

This study is on wear damage of the material for a molding machine that be used at finally cutting of metal beam made in roll forming process of vehicle bump beam process line. SKD11 steel was used with the material for cutting mold jig. In the cutting mold jig, Ti diffusion heat treatment after vacuum heat treatment was carried out for upgrade of surface hardness and anti-wear. Also, the heat treatments by various methods were performed to compare the wear damage degree against above the existing heat treatment. Wear loss and friction coefficient were obtained from wear test. And, micro Vickers hardness values were compared with damaged parts or not of cutting mold jig. Micro Vickers hardness value appeared higher at the undamaged part by Ti diffusion heat treatment. The micro Vickers hardness well followed a two-parameter Weibull probability distribution.

• Journal of the Korean Society of Costume
• /
• v.55 no.1 s.91
• /
• pp.139-150
• /
• 2005

The purpose of this study was to find out differences of image evaluation according to perceiver's gender and clothing style, and to investigate the clothing preference according to the style of campus wear. Subjects were 340 college males and females in Seoul. The image of campus wear was divided into four dimensions: neatness, polishing, potency, and activity. Gender had significant influences on the perception of neatness, polishing, and potency. Males perceived the campus wear to be neater, more polished and potent than females. There were significant differences in evaluating neatness, polishing, potency, and activity according to campus wear style. The sweatshirt was estimated low in polishing and potency but high in activity. The T-shirt${\cdot}$short pants was estimated low in polishing and neatness but high in activity. The jumper was rated high in activity, and pants suit high in neatness, polishing, and potency, but it was estimated low in activity. The skirt suit was rated high in neatness and low in activity. The knit cardigan was perceived as polished image. College students preferred knit cardigan, one-piece dress, jumper, and pants suit, however, T-shirt${\cdot}$short pants was comparatively less preferred. Males estimated the knit cardigan to be more favorable than females. Characteristics of clothing image which influenced on preference of campus wear were different between males and females.

• Journal of the Korean Society of Costume
• /
• v.60 no.1
• /
• pp.1-13
• /
• 2010

Recently population of figure skating is growing fast, so that the needs for girls figure skating wear of better quality and better fit is growing too. As the characteristics of figure skating require both strong stretching and grace movements, the skating wears should be designed to have sufficient extensibility and impressive effects through body movements. In order that the figure skating wear should be fit well by using right sizing systems. The purpose of this study is to find out how the figure skating wear specialists are using their sizing system. There were two separate comparative studies in this article. One is to compare girls' sizing system between countries such as USA, UK, Japan and Korea. This is to look into the characteristics of girls body measurements than adults or other ages. The other is to compare sizing systems of 88 figure skating wear specialists from 8 countries. As a results, it is suggested that there should be a practical sizing systems for figure skating wear, which uses common size code, measurements definition and size interval.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.350-358
• /
• 2020

Hot stamping is an effective and suitable process widely used in automotive applications, though critical issues such as the transfer of the coating materials and build-up of these materials on tool surfaces have been encountered. Past researches figured out the resultant wear phenomenon using pin-on-disc and drawing (for example, strip drawing and deep drawing) methods to mimic the process and analyzed the wear behavior with respect to the influencing factors such as surface coating, load, and roughness. Although the pin-on-disc is a conventional and widely-used method, it presented a methodological limitation when simulating the hot stamping process by forming a new blank each time, and hence, a drawing-based friction method has been proposed and developed. Each drawing method applies loads in a different way, resulting in a different wear behavior. Notably, the deep drawing process is most similar to the hot stamping process compared to other drawing methods. In this paper we present a review of the friction testing methods mimicking the hot stamping process and the associated wear behavior. This can be helpful in presenting a step-by-step approach and different perspectives on the wear behavior in the hot stamping process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.342-345
• /
• 2009

Electro galvanized steel is electroplated cold roller steel for improving corrosion resistance and paintability, and is widely used in automobiles and home appliances. In the electroplating line for manufacturing electro galvanized steel if plating process is carried out with impurity on conductor roll surface, the defects in manufacturing process occurs because of steel fault. For quality, polishing is always required to separate impurity on surface of conductor roll. In this study, finite element analysis of wear for polisher brush is carried out for replaced time of it.

• Journal of the Korean Home Economics Association
• /
• v.40 no.8
• /
• pp.61-69
• /
• 2002

The research of the current situation of made-to-measure production by ready-made men's suit companies was done by interviewing and surveying the made-to-measure specialists. It was apparent that most frequently purchased items in Mass Customization were jackets of formal dress. The results of the research on the current situation of Mass Customization by ready-made clothes companies were as follows. The Mass Customization accounted for 3∼10%. The advantages of Mass Customization were more acceptable sizes, designs and details while the initial reasons for it were unusual physical figures and designs. The posture of a customer during measuring turned out to be critical enough to influence fitness after production. The companies in the research were found out to have materials for Mass Customization in storage and the sizes and other data of fixed circle of customers who would want Mass Customization saved in computer in most of the cases.