• Title/Summary/Keyword: Weapon

Search Result 1,421, Processing Time 0.029 seconds

Magnetron Sputter Coating of Inner Surface of 1-inch Diameter Tube

  • Han, Seung-Hee;An, Se-Hoon;Song, In-Seol;Lee, Keun-Hyuk;Jang, Seong-Woo
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.135-135
    • /
    • 2015
  • Tubes are of extreme importance in industries as for fluid channels or wave guides. Furthermore, some weapon systems such as cannons use the tubes as gun barrels. To increase the service life of such tubes, a protective coating must be applied to the tubes' inner surface. However, the coating methods applicable to the inner surface of the tubes are very limited due to the geometrical restriction. A small-diameter cylindrical magnetron sputtering gun can be used to deposit coating layers on the inner surface of the large-bore tubes. However, for small-bore tubes with the inner diameter of one inch (~25 mm), the magnetron sputtering method can hardly be accommodated due to the space limitation for permanent magnet assembly. In this study, a new approach to coat the inner surface of small-bore tubes with the inside diameter of one inch was developed. Instead of using permanent magnets for magnetron operation, an external electro-magnet assembly was adopted around the tube to confine the plasma and to sustain the discharge. The electro-magnet was operated in pulse mode to provide the strong axial magnetic field for the magnetron operation, which was synchronized with the negative high-voltage pulse applied to the water-cooled coaxial sputtering target installed inside the tube. By moving the electro-magnet assembly along the tube's axial direction, the inner surface of the tube could be uniformly coated. The inner-surface coating system in this study used the tube itself as the vacuum chamber. The SS-304 tube's inner diameter was 22 mm and the length was ~1 m. A water-cooled Cu tube (sputtering target) of the outer diameter of 12 mm was installed inside of the SS tube (substrate) at the axial position. The 50 mm-long electro-magnet assembly was fed by a current pulse of 250 A at the frequency and pulse width of 100 Hz and 100 usec, respectively. The calculated axial magnetic field strength at the center was ~0.6 Tesla. The central Cu tube was synchronously driven by a HiPIMS power supply at the same frequency of 100 Hz as the electro-magnet and the applied pulse voltage was -1200 V with a pulse width of 500 usec. At 150 mTorr of Ar pressure, the Cu deposition rate of ~10 nm/min could be obtained. In this talk, a new method to sputter coat the inner surface of small-bore tubes would be presented and discussed, which might have broad industrial and military application areas.

  • PDF

Geostatistical Interpretation of Cs-137 and K-40 Result of the Lithosphere in the Vicinity of Youngkwang Nuclear Power Plant (지구통계학적 방법에 의한 영광원전주변 토층내 Cs-137 및 K-40 측정 결과의 해석)

  • 김경웅;이재석;문승현;박철승;고일원;고은정;조병옥;정철영;전수열
    • Economic and Environmental Geology
    • /
    • v.35 no.6
    • /
    • pp.545-552
    • /
    • 2002
  • In order to investigate the influence of nuclear power plant operation on its nearby environment, soil, stream and marine sediment samples were collected in the vicinity of the Youngkwang Nuclear Power Plant in Korea, and analyzed for artificial and natural radionuclide radioactivity. From the analytical result, Cs-137 was detected in most soil samples. but it may have been derived fiom past nuclear weapon tests because Cs-134 having short half-live was not detected. The radioactivities of Cs-137 in the sediment samples were also detected which are within the normal range in the sediments based upon the published literature between 1997 and 1999. For the quality control of radioactivity analysis of environmental samples, sets of marine sediments in the Gamami area were analyzed using two HPGe Gamma-ray Spectroscopes (30% and 45%) according to the geostatistical sampling strategy, and Cs-137 and K-40 results were interpreted by analysis of variance (ANOVA). In the two-way ANOVA, variances derived from the geochemical variation were significant, but errors from sampling and analytical procedures are negligible. In conclusion. all the radioanalytical procedures of this study including sampling are validated to be acceptable.

The Change of Korean Newspaper Editorials on the Ruling Policies of Imperialist Japan in Colonial Korea : Focused on the Last Period of Japanese Occupation in Korea (일제의 지배정책에 대한 신문들의 논조 변화 : 일제 말기($1937{\sim}1940$)를 중심으로)

  • Park, Yong-Gyu
    • Korean journal of communication and information
    • /
    • v.28
    • /
    • pp.111-140
    • /
    • 2005
  • Most of studies on the press during the period of Japanese occupation in Korea have focused on the activities of newspapers in 1920s. These past studies didn't examine the whole process of change of the press under the Japanese occupation in Korea. Thus, this study tried to investigate the change of the tenor of Korean newspaper editorials on the ruling policies during the end of the colonial period in Korea as a part of attempts exceeding the limit of past studies. After the outbreak of the war between China and Japan in 1937, the Korean newspapers were full of stereotyped editorials resembling in a way official gazette. Dong-A Ilbo and Cho-Sun Ilbo represented the purpose of the war was to emancipate Asian countries from Western imperialist countries and to establish the peace of the Asia. Simultaneously, two newspapers played an important role in assimilating the Korean people into the Japanese and mobilizing them to the war, The tenor of these editorials was affected by intensified control over the press and the change of the consciousness of journalists. In conclusion, these newspapers had a harmful influence on the Korean people as a weapon to the movement to organize and mobilize them. Therefore the interest for researching on the pro-Japanese press should be taken in view of 'resistance' and 'collaboration.'

  • PDF

A Study on 2010 Beijing Convention for Antiterrorism of International Aviation - Compared Beijing Convention(2010) with Montreal Protocol - (국제항공테러방지 북경협약(2010)에 관한 연구 - 몬트리올협약과의 비교를 중심으로 -)

  • Hwang, Ho-Won
    • The Korean Journal of Air & Space Law and Policy
    • /
    • v.25 no.2
    • /
    • pp.79-112
    • /
    • 2010
  • The Beijing Convention of 2010 taken together effectively establishes a new broader and stronger civil aviation security framework. This adoption would significantly advance cooperation in prevent of the full range of unlawful acting relation to civil aviation and the prosecution and punishment of offenders. First, the Beijing Convention of 2010 will require parties to criminalize a number of new and emerging threats to the safety of civil aviation, including using aircraft as a weapon and organizing, directing and financing acts of terrorism. These new treaties reflect the international community's shared effort to prevent acts of terrorism against civil aviation and to prosecute and punish those who would commit them. Second, this convention will also require States to criminalize the transport of biological, chemical, nuclear weapons and related material. These provisions reflect the nexus between non-proliferation and terrorism and ensure that the international community will act to combat both. Third, this Convention shall not apply to aircraft used in military, customs or police services. As a substitute, International Humanitarian Law will be applied in a case. Moreover, the National Jurisdiction and the application of the law will be extended farther. The treaty promotes cooperation between States while emphasizing the human rights and fair treatment of terrorist suspects.

  • PDF

The Status of Drug Use of Juveniles and their Deliquent Behaviors -Based on those of Boys and Girls on the Third Years (청소년의 약물 사용과 비행 실태 - 충청남도 일부 고등학교 3학년 학생을 중심으로 -)

  • Kim Sook-Kyeong;So Hee-Young
    • Journal of Korean Public Health Nursing
    • /
    • v.7 no.1
    • /
    • pp.49-65
    • /
    • 1993
  • This study had conducted to push our society for getting some proper measures of the anti-drug abuse and adopting this study as a fundamental data for the school health education. Sample subjects were the 3rd grade of high school in Chungnam Province and the number were 1,014. The data had been collected on Dec. 3th-8th, 1990 according to the tool of Institute on Drug Abuse of Korea. And then Frequency and $x^2-test$ were need to analyse of data by SPSS-X program. The results of this study could be summarized as follows. 1. They had used 14 kinds of drugs: $70.1\%$ of the subjects students used alcohol, $69.2\%$ analgesics, $38.6\%$ cigarette, $15.0\%$ stimulants, $14.7\%$ antitussives, $11.2\%$ antithistamines, $8.9\%$ hypnotics, $7.1\%$tranquilizers, $4.2\%$ inhalants, $2.3\%$ marijuana, $1.4\%$ hallucinogens, $0.9\%$ cocaine, $0.6\%$ amphetamines, and $0.6\%$narcotics. The boys' drug using rate is higher than girls' except in analgesics and stimulants. 2. With respect to misbehaving, $43.0\%$ of the students said they had pop houses, $42.4\%$ adult video, $17.4\%$ unexcused absence from school, $11.0\%$ dangerous weapon, $9.1\%$ sexual intercourse, $70.1\%$ disappearance from home, 8.0% blackmail, and $6.0\%$ assault. In every kinds of misbehaving, the boys' misbehaving rate is higher than the girls'. 3. Almost every kinds of drugs have the students first used at the age of 15 through. 18. And $13.8\%$ of the students smoked every da·y and $1.7\%$ drank every day. 4. The frequency of the drug using such as cigarette (p<.01), marijuana (p<.05), cocaine (p<.05) and narcotics (p<.05) showed the stastically significant differences according to the religions of the subjects 5. The subjects who has complaints about someone use more drugs than the ones who doesn't, and who doesn't have any complaints about five elements have never used drugs such as marijuana, cocaine, amphetamines, narcotics, hallucinogens, and inhalants. 6. The drug using subjects have the more experiences of adult video, pop houses, and unexcused absent from school than the non-drug using ones. It means that the subjects who use drug were apt to do misbehaving more often than the ones who have never used them, and delinquent boys and girls use more drugs.

  • PDF

A Study on the Quality Improvement of Red Dot Sight for Grenade Launcher by Parallax Reduction (고속유탄기관총용 조준경의 시차 개선을 통한 조준경 품질 향상에 관한 연구)

  • Kim, Ji-Hoon;Jeung, Bo-Sun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.11
    • /
    • pp.130-135
    • /
    • 2019
  • This study performed the quality improvement of a red dot sight for a 40 mm grenade launcher through parallax reduction. The red dot sight cited in this study is currently in mass production for military use as a non-weapon system. While the red dot sight's parallax currently meets requirements, slightly greater error was observed on the outside of effective optical area of the reflection lens compared to other sights. Parallax is easily affected by eye movement, which can result in aiming error. To improve the red dot sight's quality, this study analyzed why parallax is observed in the effective optical area of the reflection lens and how to reduce it. As a result, the red dot sight demonstrated lower parallax error using the new optical system design with an increased reflection lens thickness and modified components configuration related to the reflection lens assembly. Parallax was calculated and simulated by using a particular program to verify that it decreased. This improvement for the 40 mm. grenade launcher red dot sight more than satisfies requirements, offers advanced capabilities for users, and as a result, successful operation carryout.

Study of Applicability for Removing Contaminants on Surface of Color Pigment Using the Laser Cleaning Technique -Focus on Analysis Method of Confocal Laser Scanning Microscope- (채색 안료 층의 표면오염물에 대한 레이저클리닝기법의 적용성 평가 연구 -공초점레이저주사현미경(CLSM)을 통한 분석평가 중심으로-)

  • Kim, Jin-Hyoung
    • Journal of Conservation Science
    • /
    • v.30 no.2
    • /
    • pp.123-136
    • /
    • 2014
  • Considering that decision in conservation treatment for damaged objects should consider not only various options of methodology of intervention but also possible consequences of different types of intervention, it is a difficult task to decide and propose clear and safest solution of preserving an object. In addition, it should be constantly challenged by conservators even if it is proved technique or methodology in a past treatment. Therefore, there is no absolute solution which can be applied to all practice but each decision can be different case by case. It is not possible to estimate the way how the present condition of material and environmental aspects would affect to the condition of an object in future. However if conservators keep trying to set out various ways of analysing pro and against effect of past treatments, it would be able to provide useful logics of proving efficiency and appropriateness of a certain treatment. Understanding that the advantage of laser technique is to adopt a way of cleaning an object without making a direct contact, which is different from other techniques, this paper aims at securing stability of laser techniques, although it remains a limitation in the compatibility to all other materials. This study has examined reacting process on the painted pigments against laser beam by using CLSM in order for it to display both the problems from such reacting process and the efficiency of it as a cleaning methodology. It has intended to estimate the result of laser techniques and propose the range of applicability.

Metallurgical Characteristics and Manufacturing Techniques of Ring-Pommel Swords Excavated from Ancient Tombs in Hadae, Ulsan (울산 하대고분 출토 민고리자루칼의 재질 특성과 환두부 제작 방법)

  • Jo, Ha Nui;Kim, Han Seul;You, Ha Rim;Lee, Jae Sung
    • Journal of Conservation Science
    • /
    • v.36 no.3
    • /
    • pp.197-212
    • /
    • 2020
  • This study analyzed the microstructure of ring-pommel swords, excavated from Ancient Tombs, Hadae, Ulsan and examined their production technique, using non-destructive testing and a metallurgical method. The results confirmed that the five ring-pommel swords, unearthed in Ancient Tombs, Hadae, Ulsan, as identified by radiographic non-destructive testing, had been solely manufactured using iron, through forging based on the single-piece technique. Furthermore, these results were compared with previous studies, and the manufacturing techniques of single-piece ring-pommel swords were categorized into three types: pure iron - changing the shape, pure iron - changing the shape - carburization, and steel - changing the shape - quenching. The ring-pommels of four swords had around 0.7% of carbon content, which is as much as for eutectoid steel and higher than for other parts of these swords, such as the backs of their blades and handles. The weapon function of a small ring-pommel sword, under 60cm in length, was maximized by quenching focusing on its blade. Conversely, the martensite quenching structure was not observed in four ring-pommel swords shorter than 75cm. In other words, the same types of single-piece ring-pommel swords(late in 2C~early in 4C) were unearthed from Ancient Tombs, Hadae, and the group who has manufactured these swords is presumed to have limited their effectiveness, functionally depending on purposes, through an iron-making process and heat-treatment techniques.

A Study on Implementation of the advance Defense Technology inforMation Service (차세대 국방기술정보통합서비스 구축에 관한 연구)

  • Kim, Mi-Jeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.6
    • /
    • pp.636-645
    • /
    • 2017
  • An information system for defense technology information management should assist the user's work and manager's decision-making by managing and timely providing data held by defense-related organizations. This paper proposes a plan for constructing an advance defense technology information service. DTiMS concentrates on the collection and management of defense science technology information but not its distribution. Therefore, it is important that the advanced distribution service model be established on the concept of total life cycle management that utilizes user information, so that it can provide proper information to each user in the defense field who require the information processed by their roles. This study examined the management of information and operation method through advanced case analysis. In addition, the analysis of existing services revealed improvements in the management of an information standard, the trace ability of information and usability, and improved user-interface. The proposed development direction was implemented by deploying the advanced DTiMS. Therefore, it is expected that the proposed methodology will contribute to the weapon system total life cycle, and will support defense technology planning, and R&D decisions.

Study for Analyzing Defense Industry Technology using Datamining technique: Patent Analysis Approach (데이터마이닝을 통한 방위산업기술 분석 연구: 특허분석을 중심으로)

  • Son, Changho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.10
    • /
    • pp.101-107
    • /
    • 2018
  • Recently, Korea's defense industry has advanced highly, and defense R&D budget is gradually increasing in defense budget. However, without objective analysis of defense industry technology, effective defense R&D activities are limited and defense budgets can be used inefficiently. Therefore, in addition to analyzing the defense industry technology quantitatively reflecting the opinions of the experts, this paper aims to analyze the defense industry technology objectively by quantitative methods, and to make efficient use of the defense budget. In addition, we propose a patent analysis method to grasp the characteristics of the defense industry technology and the vacant technology objectively and systematically by applying the big data analysis method, which is one of the keywords of the 4th industrial revolution, to the defense industry technology. The proposed method is applied to the technology of the firepower industry among several defense industrial technologies and the case analysis is conducted. In the process, the patents of 10 domestic companies related to firepower were collected through the Kipris in the defense industry companies' classification of the Korea Defense Industry Association(KDIA), and the data matrix was preprocessed to utilize IPC codes among them. And then, we Implemented association rule mining which can grasp the relation between each item in data mining technique using R program. The results of this study are suggested through interpretation of support, confidence lift index which were resulted from suggested approach. Therefore, this paper suggests that it can help the efficient use of massive national defense budget and enhance the competitiveness of defense industry technology.