• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.78-87
• /
• 2016

Red blood cells (RBCs) are customarily adhered to a bio-functionalised substrate to make them stationary in interferometric phase-imaging modalities. This can make them susceptible to receive alterations in innate morphology due to their own weight. Optical tweezers (OTs) often driven by Gaussian profile of a laser beam is an alternative modality to overcome contact-induced perturbation but at the same time a steeply focused laser beam might cause photo-damage. In order to address both the photo-damage and substrate adherence induced perturbations, we were motivated to stabilize the RBC in OTs by utilizing a laser beam of ‘arbitrary intensity profile’ generated by a source having cavity imperfections per se. Thus the immobilized RBC was investigated for phase-imaging with sinusoidal interferograms generated by a compact and robust Michelson interferometer which was designed from a cubic beam splitter having one surface coated with reflective material and another adjacent coplanar surface aligned against a mirror. Reflected interferograms from bilayers membrane of a trapped RBC were recorded and analyzed. Our phase-imaging set-up is limited to work in reflection configuration only because of the availability of an upright microscope. Due to RBC’s membrane being poorly reflective for visible wavelengths, quantitative information in the signal is weak and therefore, the quality of experimental results is limited in comparison to results obtained in transmission mode by various holographic techniques reported elsewhere.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.4
• /
• pp.355-367
• /
• 2004

The heat transfer and friction characteristics of the heat exchangers having sinusoidal wave fins were experimentally investigated. Twenty-nine samples having different waffle heights (1.5 mm and 2.0 m), fin pitches (1.3mm to 1.7mm) and tube rows (one to three) were tested. Focus was given to the effect of the waffle configuration (herringbone or sinusoidal) on the heat transfer and friction characteristics. Results show that the sinusoidal wave geometry provides higher heat transfer coefficients and friction factors than the herringbone wave geometry, and the difference increases as the number of row increases. The i/f ratios of the herringbone wave geometry, however, are larger than those of the sinusoidal wave geometry. Compared to the herringbone wave geometry, the sinusoidal wave geometry yielded a weak row effect, which suggests a superior heat transfer performance at the fully developed flow region. Possible explanation is provided considering the flow characteristics in wavy channels. Within the present geometric range, the effect of the waffle height on the heat transfer coefficient was not prominent. The effect of the fin pitch was also negligible. Existing correlations highly overpredicted both the heat transfer coefficients and friction factors. A new correlation was developed using the present data.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.64-69
• /
• 2013

The Numerical simulation was performed on the flow field around the two-dimensional rectangular bluff body in order to simulate an engine nacelle fire and to complement the previous experimental results of the bluff body stabilized flames. Fire Dynamic Simulator (FDS) based on the Direct Numerical Simulation (DNS) was employed to clarify the characteristics of reacting flow around bluff body. The overall reaction was considered and the constant for reaction was determined from flame extinction limits of experimental results. The air used atmosphere and the fuel used methane. For both fuel ejection configurations against an oxidizer stream, the flame stability and flame mode were affected mainly by vortex structure near bluff body. In the coflow configuration, air velocity at the flame extinction limit are increased with fuel velocity, which is comparable to the experiment results. Comparing with the isothermal flow field, the reacting flow produces a weak and small recirculation zone, which is result in the reductions of density and momentum due to temperature increase by reaction in the wake zone.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.4
• /
• pp.840-847
• /
• 2005

This study was written in order to help understanding of visible diagnosis of energy and color(기색). Visible diagnosis of energy and color is a very important factor of diagnosis and a necessary step of visible diagnosis. As human's body is under the control of spirit(신) and spirit(신) is stored by five viscera(오장), so spirit expresses the change of five viscera and is reflected by energy and color(기색). Strictly speaking, energy and color(기색) is not divided into each other. But, we can say that glittering glossy part belongs to energy(기) and blue, red, yellow, white and black part belongs to color(색). Various changes of energy and color(기색) observe the rules of yin-yang(음양). If we consider the interior and exterior(내외), top and bottom(상하), right and left(좌우), rise and fall(부침), clearness and muddiness(청탁), weak and severe(미심), spread and gather(산박), gloss and dness(택요) etc. we can decide the yin and yang(음양), inside and outside(표리), coldness and heatness(한열), truth and false(허보), life and death(생사) and prognosis. One man's own color is determined by the five human type(오형인), There are very various points of changing colors. As divided into principal groups, there are three main groups, that is, sky(천), earth(지) and man(인). A season(사시), day and night(주야) and cloud and clear(음청) belong to the factor of sky(천), a direction and configuration of the ground(지형) belong 治 the factor of earth(지), and motion and rest(동정), seven emotions(칠정), age and youth(노소), poor and rich(빈부) and high and low(귀천) belong to the factor of man(인).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.139-149
• /
• 1994

A numerical simulation of unsteady axisymmetric turbulent flow was performed for a reciprocating engine including port/valve assembly. The governing equations based on a nonorthogonal coordinate formulation with Cartesian velocity components were used and discretised by the finite volume method with non-staggered variable arrangements. The modified $\kappa-\xi$. turbulence model which included the effect of compressibility was used. The results of twodimensional transient calculation for the axisymmetric configuration were compared with the experimental data. Although slightly low rms velocity was predicted compared to the experimental data, predicted velocity distributions at the valve exit and in-cylinder region showed good agreements with the experimental data. The flow at the valve exit was separated at the same valve lift position with the experimental data. Two vortices incylinder region were generated during the initial intake process. The clockwise main vortex became strong and moved upward to the top wall. The counter-clockwise second vortex became weak and stick to the upper left corner of the cylinder. After middle intake process, new vortex adjacent to upper cylinder wall appeared by the piston motion and therefore, the in-cylinder flow was formed into three vortices. The cylinder pressure just before bottom dead center of piston was higher than inlet pressure and then the reverse flow occured at the valve exit. The in-cylinder flow characteristics were strongly dependent on piston motion, but insensitive to valve motion.

• Geophysics and Geophysical Exploration
• /
• v.3 no.3
• /
• pp.88-93
• /
• 2000

The present study may be summarized as follows. By means of a pole-pole electrical survey, major geological features, i.e, fresh rocks, fractured & weak & saturated rocks, fresh water bearing aquifer, were successfully delineated in the surveyed area of a granite region in Korea. The subsequent Schlumberger sounding and drilling confirmed the existence of the acquifer at 60 m depth as expected. But one more minor acquifer which does not show up in the resistivity depth section was met at 100 m depth. A simple forward modelling leads the authors to believe that any other electrode configuration, e.g., Wenner, Schlumberger, dipole-dipole, pole-dipole, would not detect the deeper aquifer. Under these circumstances, further studies remain to be done in connection with the spatial resolution in the vertical direction.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.565-572
• /
• 2001

The spatial genetic structure of Needle fir(Abies holophylla Max.) seedlings on forest gap within a Needle fir forest at Mt. Odae in Korea was analyzed on the basis of ISSR(inter-simple sequence repeats) marker analysis. The gap size was $1,500m^2(50m{\times}30m)$, and we sampled 416 one- or two-year-old seedlings by 2m intervals. Some trees at the upper crown layer except Needle firs and all trees at the middle and lower crown layers were removed, and Needle firs at the upper crown layer showed very weak growth strength or to be withering to death. The results of spatial autocorrelation using 31 polymorphic ISSR markers revealed that it was genetically homogeneous within spatial distance of 15.6m and the randomness of genetic distribution was from 15.6m to 31.2m. The genetic patch size of seedlings in forest gap might be restricted by the density of mother trees, making allow for the average height of adult Needle firs, the seed dispersal area, and the average distance between adults. For the directionality of seedling distribution, we investigated the variography using 'genetic configuration' which was the value of configuration in Multidimensional Scaling by genetic distance. In directional variogram, the increment of spatial distance from East to West direction was inversely proportional to genetic homogeneity. We presumed that this anisotrophy of seedling distribution at this forest gap resulted from the directionality of seed dispersal rather than the difference of fecundity between mother trees or the microhabitat variation, taking the evenness of forest floor condition, a vast seed production and the random distribution of seedlings at the studied site into consideration.

• Clinics in Shoulder and Elbow
• /
• v.12 no.2
• /
• pp.207-214
• /
• 2009

Purpose: In arthroscopic rotator cuff repairs there are generally weak link in tendon suture interface, arthroscopic rotator cuff repairs can have higher retear rates than open repairs. The purpose of this study was to compare the strength of UU (Ulsan University) suture than open modified MA (Mason-Allen) suture when suture anchored into bone. Materials and Methods: The human supraspinatus tendons were harvested from the shoulder of the cadaver and split in 2 times, producing four tendons per one shoulder, for a total of 24 specimens. Two suture configurations (UU, MA) were randomized and checked on each set of tendons. Specimens were cyclically loaded under force control between 5 and 30 N at 0.25 Hz for fifty cycles. Each specimen was loaded to failure under displacement control at 1 mm/sec. Cyclic elongation, peak to peak displacement, stiffness, ultimate tensile load, mode of failure were checked. Results: No significant difference was found between two suture configuration with respect to peak to peak displacement, cyclic elongation, and stiffness. With regard to ultimate failure load, there were no significant difference statistically between the UU suture and modified MA suture (109.4 N, 110.6 N). The most common mode of failure between both sutures was suture pull-out through the tendon. Conclusion: The UU suture and modified MA suture produced similar biomechanical properties.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1193-1203
• /
• 2008

An active antenna(AA) can have wider bandwidth and more gain with small antenna size than those of passive antennas. However, AA inherently generates thermal noise and spurious signals from an active device. Moreover, the spurious performance of AA is very important in a highly sensitive receiving system since it is located at the front end of the receiving system. In this study, we developed an AA with $100{\sim}500\;MHz$, having the output P1dB higher than 3 dBm and little spurious signals in real environments. To achieve such performance, we designed an AA with 3-stage amplifier using CD(common drain) FET and 2 BJTs. Its electrical performances were simulated using ADS. The measurement results for typical gain, NF, OIP3, VSWR and P1dB in the required frequency band were 9.7 dBi, 10 dB, 14 dBm, 1.7:1 and 3 dBm respectively. They are in good agreement with simulation results. The unwanted spectrum level of the proposed AA is $10{\sim}30\;dB$ lower than that of the antenna with CS(common source) FET configuration at a west suburban area of Seoul, which shows that the proposed AA can be applicable to a highly sensitive receiving system for detecting unknown weak signals mixed with broadcasting and civilian communication signals.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.439-452
• /
• 2014

This paper suggests the method to extend service area by using the transmit offset delay in T-DMB single frequency network (SFN). In general, synchronization of the transmit time of all site can be done by using the reference clock of GPS, which dose not reflect the details geographical characteristics and transmit specifications of each site. Applying the site-specific transmit offset delay, we could extend the service area of SFN T-DMB. Applying the transmit offset delay, it is found that the signal quality in the region of weak receive field strength was improved and upto 4~8 km service area expansion was achieved by satisfying the minimum field strength ($45dB{\mu}V/m$) recommended by the Korea Communications Commission (KCC). Site-specific offset delay was calculated considering the geographic service area characteristics, distribution of electric field strength between neighboring sites and site-specific service target area. Experiments were carried out in order to analyze impact of calculated offset delay on the T-DMB SFN and also to confirm that the offset delay extends T-DMB service coverage. The experiment was done in metropolitan T-DMB service areas.