• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.201-214
• /
• 2013

Lattice girders are widely used as a substitute for H-steel ribs at domestic tunnels. However, lattice girders have a weak point in terms of the support capacity compare to H-steel ribs because of the lower stiffness and the weakness of the welded parts. To improve the weakness of the lattice girder, reformed lattice girders are developed in Korea by adding one more spider and having flat welded surface. Laboratory tests and field measurements were performed for the original and the reformed lattice girders to evaluate the performance of the reformed lattice girders. According to the laboratory compression test, reformed lattice girders have 16% higher load bearing capacity than that of original lattice girders. Reformed lattice girders are more stable than original lattice girders because reformed lattice girders tend to bend less according to the field measurements.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.1
• /
• pp.367-375
• /
• 2000

The purpose of this study is to announce the present condition, walking training, and adaptable training of a limb amputated patient. The study is a successful report of the limb amputated patient through the medical treatment of the physical therapy. A cause of the limb amputated patient, a truck driver, was that the patient was hit by a train when the driver alight from the truck. Then, the driver was surgical operated on left AK (Above Knee) amputation and left AE (Above Elbow) amputation by orthopedics at the Young Dong Severance Hospital on Dec.7, 1996. Two weeks after the operation (Dec., 22, 1996), the patient was trained at the Yonsei Medical Center Physical Therapy Hospital for the walking and temper adjust training. It was possible to do a flat surface walking and a slope surface walking without helping due to the patients optimistic personal character and motivation. However, the patient struggled to a dull surface walking and his weak endurance. the patient has several problems when the patient wears artificial legs and hands, fears on fall down, and mentally worries on noise when he walks. It is necessary to approach for this problems by many fields of the helpers, such as Rehabilitation medical doctor, physical therapist, occupational therpist, artificial limbs makers, psychologists, and etc. Therefore, in order for recovering from the amputated parts function after the surgical operation, more approved reports have to be for the amputated patients due to increasing traffic accidents, industrial disaster, cancer, diabetes, obstacles of the peripheral nervous system, and etc.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.1
• /
• pp.22-30
• /
• 2004

As an information-oriented society comes, many people use PC and depend on database that network server has. However, the online data can be missed when a blackout happens and also a power failure effects on standard of judgment on Power Quality. Thus, it is reason of a trend using interruption-free live-line work when a trouble happens to power system. However, the 83％ among the number of people who receive an electric shock experience when a laborer is doing interruption-free live-line works. In interruption-free method, the education and the training problem has been issued. However, we have a few instructors for that training. Furthermore, the trainees have short training period, just 4 weeks. In this paper, to develope the method that has no restriction of a time and place and reduce the wasteful materials, immersion type virtual reality(or environment) technology is used. The users of a 3D immersion type VR training system can interact with the system by doing same action in the real safe environment. Thus, it can be valuable to apply this training system to a dangerous work like as "Interruption-free live-line work exchanging COS(Cut-Out-Switch)". In this program, the user works with a instruction on the window and speaker and can't work other tasks until each part of the task completed. The workers using this system can use their hands and viewpoint movement as he is in a real environment but the trainee can't use all parts and senses of a real body with the current VR technology. Despite of this weak point, when we consider the trends of improvement in electrical devices and communication technology, we can say that 3D graphic VR application has a high potentiality.

• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.74-77
• /
• 2006

This research is focused on the development of GIS Diagnostic SYSTEM to prevent accidents beforehand by inspecting the internal defects of GIS (Gas Insulated Switchgear) which is a main power-facility for substations. GIS Diagnostic SYSTEM is categorized as 'Real time on-line test type' and 'Portable test type' depending on the types of testing, it uses PD(partial discharge) which mostly incurs in GIS internal defects, to inspect. As of now, mostly foreign equipments are imported for use due to the lack of the technology localization, and these are installed and operated on only some parts of highly-graded GIS power-facilities such as in 76skv or 345kv for its being expensive. Furthermore, other than foreign equipments being costly, it also has a weak point of very long unavailability in case of Diagnostic system break-down while using, because it takes a comparatively long period of corrective maintenance precesses. We have localized to develop personal real-time multi -functional GIS Diagnostic system which can test on all GIS power-facility comprehensively and economically therefore overcome all these problems mentioned above, a market expansion is expected from the decrease of price and replacing the import equipments in the future. As the equipment was developed to be Personal for the simple ways of installing and utilizing, it can be operated without any complex cable installation like other existing GIS Diagnostic system requires, therefore also decrease the cost of cable installation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.196-201
• /
• 2016

Digital watermarking is a technique used to hide information within digital media. Digital watermarking techniques can be classified as either robust watermarking or fragile watermarking. Robust watermarking techniques are generally used for the purpose of copyright protection. In addition, fragile watermarking techniques are used for the authentication and integrity verification of a digital image. Therefore, fragile watermarks should be easily breakable for trivial tampering of a watermarked image. This paper proposes an efficient fragile watermarking method for image tamper detection in the spatial domain. In the proposed method, a hash code and symmetric key encryption algorithm are used. The proposed method of inserting a watermark by dividing the original image into many blocks of small sizes is not weak against attacks, such as cut and paste. The proposed method can detect the manipulated parts of a watermarked image without testing the entire block of the image.

• Publications of The Korean Astronomical Society
• /
• v.14 no.1
• /
• pp.39-45
• /
• 1999

We have carried out measurements of 1.2-1.6GHz radio interferences around Seoul Radio Astronomy Observatory located in the campus of Seoul National University. We received interference signals using a pyramidal horn antenna and measured its power using a spectrum analyzer with 1MHz resolution after $\~60dB$ amplification. In order to check the spatial characteristics, we made observations at every $30^{\circ}$ in azimuth at elevation of $30^{\circ}\;and\;60^{\circ}$. Also, in order to check the temporal characteristics, we repeated the all-sky observations five times at every six hours. The results may be summarized as follows: (1) There are strong $({\geq}-20dBm)$ interferences between 1.2 and 1.4GHz. Particularly strong interferences are observed at 1.271 and 1.281GHz, which have maximum powers of -0.34dBm and -0.56dBm, respectively. (2) The characteristics of the interferences do not depend strongly on directions, although the interferences are in general weak at high elevation and in east-west direction. (3) The interferences appear for a very short $(\leq0.01s)$ period of time, so that the average power is much smaller than the maximum power. Strong interferences with large $(\leq-49.0dBm)$ average power have been observed at 1.271, 1.281, 1.339, and 1.576GHz. At these frequencies, the interferences appear repeatedly with a period of $\leq0.1s$ By analyzing the observed power, we find that, for the strongest 1.271GHz interference, the average intensity is $-171dBW/m^2/Hz$ and that the maximum intensity is $-122dBW/m^2/Hz$. If this interference is delivered to the detector without any shielding, then its power would be much greater than the rms noise of a typical line spectrum. Therefore, it is important to shield all the parts of receiver carefully from radio interferences. Also, without appropriate shielding, the sensitivity of a receiver could be limited by the interference.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.553-561
• /
• 2012

Existing energy sources convert chemical energy into mechanical energy, while fuel cell directly generates electricity through an electrochemical reaction between hydrogen and oxygen. Therefore, it has a lot of strong points such as high efficiency, zero emission, and etc. In addition, with the development of hydrogen preservation technique, some companies have been researching and releasing portable fuel cell power packs for specific applications like military equipment, automobile, and so on. However, there are some drawbacks to the fuel cell, high cost and slow dynamic response. In order to compensate these weak points, auxiliary energy storages could be applied to the fuel cell system. In this paper, the optimum structure for a 150W portable fuel cell power pack with a battery pack is selected considering the specification of the system, and the design process of main parts is described in detail. Here, main objectives are compact size, simple control, high efficiency, and low cost. Then, an automatic mode change algorithm, which converts the operating mode depending on the states of fuel cell stack, battery pack, and load, is introduced. Finally, performance of the designed prototype using the automatic mode change control is verified through experiments.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.5
• /
• pp.313-321
• /
• 2014

Objective: The purpose of this study is to develop products that prevent muscular skeletal disease of farm workers, which would bring improvement for an efficient harvesting work. Background: A pretest for product development and a survey research was carried out to inspect the problems of current harvesting work procedure. The product was developed and assessed based on ideas to supplement and improve these weak points. Method: A total of twenty men were recruited to evaluate the effects of harvest baskets on the upper-limb muscle activity, working hours. For the usability evaluation, electromyogram and working hours of previous working method (disuse of harvest basket, one-hand carriage of the basket) and new working method with the usage of newly-developed harvest basket was examined. The whole anterior deltoid, biceps brachii and erector spinae on both sides, which make a total of six muscle parts, were used for this experiment. The results were analyzed using ANOVA with muscle activity (%MVC) of each three forms of work and required work time from SPSS 18.0. Results: According to the test result, all muscles did not demonstrate any statistically significant difference, with an exception of the backbone erector (right). The muscle activity of backbone erector (right) in the work method that uses the harvest basket developed in this study was detected to be approximately 23% less than that of the previous working method. Moreover, compared to the previous working method, the required work time decreased to a statistically significant degree. Conclusion: As such, the decrease in the amount of waist muscle usage at harvesting work would enable the prevention of muscular skeletal disease and stabilization of lumbar spine. Application: Which in turn would increase the effectiveness and reduce personnel expense (labor costs) while enhancing productivity with a decreased working hours.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.1 no.1
• /
• pp.83-90
• /
• 2000

Oryeong-San, Pangpungtongseong-San, Rangkyeoksanwha-Tang, Sipeemikwanjoong -Tang and Taeumjoui-Tang are not only examined using the code which are related to overweight in the QRIS but are also investigated the level of Free Radical using the Free Radical Measurement after steeping those 5 prescriptions in water. The results are as follows: 1. We indicated in the study of QRIS that 5 kinds of medicines which used most frequently In the treatment of the obesity appeared to affect the Immune system, spleen, kidneys, pancreas, the fatigue toxicity, TSH, and the metabolic disability but did not influence high on the contents of overweight and those of fatty cell, as well. in addition, there were no significant differences between the prescriptions as regards testosterone and progesterone. 2. In the Free Radical Measurement, Rangkyeoksanwha-Tang evaluated significantly high level of Free Radical, whereas others appear to have the similar level of Free Radical. These findings suggest that the treatment of the obesity affects particular body parts with respect to the control of overweight, although those medicines are not related directly to the areas(such as fatty cell Code), it is possible that they influence on the cure for the obesity. Furthermore, they indicate that with soaking prescription, Free Radical is not produced as much as we expected.

• 한국해양학회지
• /
• v.21 no.1
• /
• pp.56-71
• /
• 1986

In order to clarify the influence of environmental factors on the phytoplankton cmmunity in Kyeonggi Bay, the hydrological and water quality data were obtained from 20cruises from May, 1981, to September, 1982 in this bay. Physical conditions at the mouth of the bay are more stable than those at the head of the bay. Temperatures and salinities of the upper part of the bay show great seasonal fluctuations due to the river discharge. By the extending effects of freshwater, a weak two-layer flow system is formed from the upper part of the bay to Palmi Island. In summer thermal stratification are formed in the middle and outer parts of the bay. In winter, However, the temperature shows no vertical temperature gradient. The inner bay and the vicinity area of Incheon Harbour are relatively polluted and eutrophicated due to both the runoff of freshwater from the Han River and the waste discharge from Incheon industrial complex. However, except the polluted area, the study areas are well oxygenated with more than 90% saturation.