• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.652-661
• /
• 2006

The cut slopes in Jinju area constitute the Cretaceous Sedimentary rock which is one of the most poor ground conditions. The geological rocks of the cut slopes are correlated with Jinju Formation. Most of the rocks consist of Black Shale layer, but the lower parts consist of Alkorsic White Sandstone. So, It is characteristic of the differential weathering due to the difference of rock species. Moreover, vertical joints which concentrate on the released rock and weak rock fragments are accompanied with minor faults. We make out face mapping about each slopes through the detailed field-study and deduce RMR and SMR from the field data. The strength properties of rocks were obtained from references, indoor tests, and Back Analysis method. And, choosing properties were used in the stability analysis as stereographic projection and limit equilibrium analysis and we establish the countermeasures for the cut slopes.

• Transactions on Electrical and Electronic Materials
• /
• 제11권5호
• /
• pp.238-241
• /
• 2010

The purpose of this study is to solve the problems of radio frequency bandwidth frequency depletion, confusion possibilities, and security that are in current wireless communications systems, and to confirm the possibility of applying those solutions for the next generation network. To solve the problems of the current wireless communications system, a visible light communications system for power line communication (PLC) via 8-bit microcontroller is created and the capacity is analyzed. The exclusive PLC chip APLC-485MA, an 8-bit ATmega16 microcontroller, high brightness 5pi light emitting diodes (LEDs), and the LLS08-A1 visible light-receiving sensor were used for the transmitter and receiver. The performance was analyzed using a designed program and an oscilloscope. The voltage change was measured as a function of distance from 10-50 cm. Blue LEDs showed the best performance among the measured LED types, with 0.47 V of voltage loss, but for a distance over 50 cm, precise data was not easy to obtain due to the weak light. To overcome these types of problems, specific values such as the changing conditions and efficiency value relevant to the light emitting parts and the visible light-receiving sensor should be calculated, and continuous study and improvements should also be realized for better communication conditions.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.45-51
• /
• 2014

Generally, marine transmissions contain straight shafts and helical gears, meaning that enginerooms require more space. In order to guarantee a levelengine space for conical involute gears or beveloid gears, both of which are important machine parts, a conical gear was used to replace the traditional cylinder gear. Owing to weak points such as the point contact phenomenon of the teeth, a limitation of the width of each tooth in terms of the addendum, the variational modification coefficient,and the difficulty of processing, research about conical involute gears remains at a standstill. Along with the increasing number of applications of conical involute gears, research on conical gear design technology is necessary. In this paper, in an effort to enhance conical gear design technology, research on the 3D modeling and stress analyses of helical conical involute gears were done.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.357-374
• /
• 2014

The design basis is being shifted from strength to deformation in modern performance-based design codes. This paper presents a practical method for optimization of eccentrically braced steel frames, based on the concept of uniform deformation theory (UDT). This is done by gradually shifting inefficient material from strong parts of the structure to the weak areas until a state of uniform deformation is achieved. In the first part of this paper, UDT is implemented on 3, 5 and 10 story eccentrically braced frames (EBF) subjected to 12 earthquake records representing the design spectrum of ASCE/SEI 7-10. Subsequently, the optimum strength-distribution patterns corresponding to these excitations are determined, and compared with four other loading patterns. Since the optimized frames have uniform distribution of deformation, they undergo less damage in comparison with code-based designed structures while having minimum structural weight. For further investigation, the 10 story EBF is redesigned using four different loading patterns and subjected to 12 earthquake excitations. Then a comparison is made between link rotations of each model and those belonging to the optimized one which revealed that the optimized EBF behaves generally better than those designed by other loading patterns. Finally, efficiency of each loading pattern is evaluated and the best one is determined.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.255-260
• /
• 2014

A portable clip-type pulsimeter equipped with a magnetic sensing Hall device has been developed to raise the accuracy of oriental disease diagnosis and therapy by convergence of magnetism and oriental medicine. To improve accuracy and reliability of conventional pulsimeter due to subjective analysis of the pulse wave and measuring position dependency of the arterial pulse sensor, the fuzzy algorithm was applied to analyze the strong- and weak-pulse wave symptom. Optimal time for electronic acupuncture was calculated using fuzzy rules and interference were drawn from objective data in view of pre-treatment. Moreover, the electrical characteristics of the pain parts that respond to acupuncture point were applied in view of post-treatment to propose the scientific pulse wave algorithm and simulation experiment.

• Natural Product Sciences
• /
• 제26권2호
• /
• pp.151-157
• /
• 2020

Extensive column chromatography separation of the MeOH extract from the aerial parts of Phyllanthus urinaria afforded seventeen compounds (1 - 17). The structures of the compounds were elucidated by physicochemical and spectroscopic methods to be 5'-β-D-glucopyranosyloxyjasmonic butyl ester (1), (+)-cucurbic acid (2), dendranthemoside B (3), boscialin 4'-O-β-D-glucoside (4), 4,5-dihydroblumenol A (5), (6R,9R)-megastigman-4-ene-9,13-diol (6), (3S,5R,6S,9R)-3,6-dihydroxy-5,6-dihydro-β-ionol (7), (6S,9R)-roseoside (8), mallophenol B (9), icariside B₅ (10), corchoinoside B (11), canangaionoside (12), 5,6-epoxy-3-hydroxy-7-megastigmen-9-one (13), icariside B₂ (14), (7E)-2β,3β-dihydroxy-megastigm-7-en-9-one (15), betulalbuside A (16), and loliolide (17). The compounds 1, and 3 - 16 were isolated for the first time from this plant. The absolute stereochemistry of compound 1 was newly determined. The isolated compounds were tested for cytotoxic activity against four human tumor cell lines in vitro using a Sulforhodamin B bioassay, but all the compounds showed weak cytotoxic activities.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.68-75
• /
• 2006

The lead frame manufactured by stamping process plays an important role in connecting semiconductor to PCB board. As a result of the miniaturization of semiconductor, its corresponding lead frame punch has been narrow. In case of the punch with high slenderness ratio such as lead frame punch, the punch can be broken suddenly due to buckling. To prevent the fracture of lead frame punch, some manufacturers have experientially attached stiffeners to weak parts of punch. The purpose of this study, therefore, is to suggest the guideline far design of stiffened punch. The optimal position and the number of stiffeners to be attached to punch are investigated by elastic buckling analysis. The elastic buckling analysis consists of the eigenvalue buckling analysis and nonlinear buckling analysis. The critical buckling load of elastic buckling analysis is compared with that of buckling test. Finally, the guideline far attaching stiffeners is suggested through analysis of cross section of lead frame punch such as moment of inertia and eccentricity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1488-1490
• /
• 2008

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch, The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply(HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

• 통상정보연구
• /
• 제10권1호
• /
• pp.175-191
• /
• 2008

Materials Industry has a very large ripple effect on national economic development. Nevertheless, Korea has been passing over importance of this Industry. So, this study examined competitiveness on ten chief exporting items to U.S.A market based on the understanding of vital role of materials industry in the national economy. Analyzing methods were Market Share, Trade Specialization Index(TSI), and Market Comparative Advantage(MCA) and the data were collected through parts and materials statistical data which produced by Korean Commerce and Industry Minister. From this study, following results were found. i) Highly ranked items of U.S.A market share were chemical fiber drapery weaving, synthetic fiber. These items commanded over 10% share of the same market and tire, steel wire occupied 9.05%, 8.65% respectively. ii) In searching trade balance aspects through TSI, tire and steel wire secured very powerful competitiveness among examined items in trading with U.S.A. while synthetic resins and other plastic material were very weak competitiveness in the same market. iii) Analysis results of market competitiveness by MCA, indicated that chemical fiber drapery weaving, synthetic fiber and tire ensured high-powered competitiveness in U.S.A Market. Therefore, these items would be positioned as main items in the market.

• 통상정보연구
• /
• 제10권2호
• /
• pp.45-62
• /
• 2008

As the Internet settles down as a general means, every year the domestic e-commerce transaction using the internet rapidly increases in its scale, and the conflicts occurred from the e-commerce largely grow as well. However, it is true that the clear settlement means to work out such conflicts is not established yet. Considering the feature of e-commerce, it would be better to resolve them by ADR rather than by lawsuits in the court, and in addition to it, the ODR system having sweetness as its advantage will be the optimized model. But to make the ODR settled down, there are many assignments to be improved in many aspects afterwards. In case of our country also, since the ODR system is still its early developing step, it is not activized yet due to its weak technical, lawful environments. Thus, currently, it is unavoidable to operate the dispute mediation system, carrying out a system by the existing Off-line together, and thereby, as we replace the parts worked out by the Off-line with by the On-line, we must try to develop it into a quick, cheap, and reliable dispute settlement system.